Very well done video. Lots of info and no non-sense. Thank you so much for sharing your build! Looks great and I hope you enjoy that build for many years to come.
@@twinzspeedshop5931 Ahhh, bummer man. I'm sure you enjoyed it while you had it. It looked sick! I really do appreciate the info as I am looking into re-building a 70 and a 50 for my boys in the near future. Your tips will come in handy. I plan to 88cc both of the bikes.
I think you did good. I have a xr70r and I’m doing it finally! I am a double amputee recently but couldn’t finish it. It’s a 1997 that I bought in 2001 and didn’t want to mess with it. But anyways I think it’s worth it to do!
Hey man thanks a ton for the info on the forks, I found them on eBay and wanted to see if anyone had any experience with them. This video was literally the only thing out there. Again, thanks! I ordered some for $125
@@twinzspeedshop5931 appreciated I got a 2002 xr50 I'm doing build on doing same suspension setup like u did just looks cheapest and most driveable for a adult im 6ft
@@jackmoran6045 for sure! I don’t get wild enough to ever hit the skid with this bike, just putt around and practice wheelies and all that fun jazz but I do want to do a bbr skid since this bike has a lot of good parts invested on it, need to protect them lol
That is one nasty machine! I'm not as good as you but I found a company t-bolt USA and I bought a modified engine I think they called it a Works engine!? Price was good they built the entire engine up for me new piston head carburetor gaskets rings intake Heavy Duty clutch they even installed it in their test machine ran it adjusted the jetting swapped oil again and send it to me as a complete engine including leaving all the wires hooked up the CDI coil ignition wires kill wire everything with plugged in all I had to do was put two bolts in sprocket chain exhaust system gas and I was ready to go. Vince could not be more helpful. Good luck with your racing or off-roading by the way pit bikes are a lot of fun the best hobby ever
Dude this is the sickest 50 I’ve ever seen…totally legit! 🤙
Very well done video. Lots of info and no non-sense. Thank you so much for sharing your build! Looks great and I hope you enjoy that build for many years to come.
Thanks! Sadly it’s gone..I had to sell it
@@twinzspeedshop5931 Ahhh, bummer man. I'm sure you enjoyed it while you had it. It looked sick! I really do appreciate the info as I am looking into re-building a 70 and a 50 for my boys in the near future. Your tips will come in handy. I plan to 88cc both of the bikes.
I think you did good. I have a xr70r and I’m doing it finally! I am a double amputee recently but couldn’t finish it. It’s a 1997 that I bought in 2001 and didn’t want to mess with it. But anyways I think it’s worth it to do!
Can you post a link to the Kevlar grips and gold bar ends please? Sick build
Hey man thanks a ton for the info on the forks, I found them on eBay and wanted to see if anyone had any experience with them. This video was literally the only thing out there. Again, thanks! I ordered some for $125
No problem! Very glad this helped out! Thanks for watching as well 🤙🏼
Link to these forks ?
Nice clean 50's!
Looks amazing I order same forks 4 mine what bolt do u use for front stock one way to short??? Thanks
Do the forks clunk on you when they extend on a sharp hit like a pot hole too? They fit but good lord they slam bad like there is no buffer
Where did you get the xr 70 steering stem
Do you remember the axle length for the fork set up?
Hey how well do the forks jump I’m thinking about buying
Can you a link for those forks? I’d like to switch over to 27mm and stiffer as well. Nice bike build too
Did you get the link?
How long are them front forks are they 520mm/20.47in
Can you give me the site or info for the forks need for my 2004 crf50
I have like 5k in a 50 ive held on to for many years 💪🙌👊🇺🇸
Can you link the rear shock pls
Can you help me out with finding the triple clamps for these forks
Stock xr70 or crf70 triple clamps
Any website in particular? Ok cool. And also what hub with brakes should i buy. How has that 50 cal swing arm been for you?
I’ve got my xr50 took to the frame now redoing it what you think final cost you have in everything?
Nice! Total was around $2700
what is the tripple clamp thats on the bottom?
Xr70 triple clamps
Keen to get a set of those forks what are they actually called so i can look them up to buy them
www.ebay.com/itm/144539120472?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1IdxswCkjRK6gojBCad4swg31&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=144539120472&targetid=1644837435723&device=m&mktype=&googleloc=9026243&poi=&campaignid=16743749222&mkgroupid=138744546207&rlsatarget=pla-1644837435723&abcId=9300842&merchantid=101745562&gbraid=0AAAAAD_QDh-GrDSmo3F3twFszWhHXYdqq&gclid=CjwKCAjwnZaVBhA6EiwAVVyv9AoG1xkCSYsv9Xq1mHKSiPf-uW8p4TX305cC40_IDo22RuLyt01nBhoColoQAvD_BwE
Love to know where u got the forks from off ebay been searching for bigger forks for my mini 50
www.ebay.com/itm/144539120472?chn=ps&_trkparms=ispr%3D1&amdata=enc%3A1IdxswCkjRK6gojBCad4swg31&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=144539120472&targetid=1644837435723&device=m&mktype=&googleloc=9026243&poi=&campaignid=16743749222&mkgroupid=138744546207&rlsatarget=pla-1644837435723&abcId=9300842&merchantid=101745562&gbraid=0AAAAAD_QDh-GrDSmo3F3twFszWhHXYdqq&gclid=CjwKCAjwnZaVBhA6EiwAVVyv9AoG1xkCSYsv9Xq1mHKSiPf-uW8p4TX305cC40_IDo22RuLyt01nBhoColoQAvD_BwE
@@twinzspeedshop5931 appreciated I got a 2002 xr50 I'm doing build on doing same suspension setup like u did just looks cheapest and most driveable for a adult im 6ft
@@twinzspeedshop5931 with these forks do u need the xr70 triple clamp then high rise bars for xr70 then ?
@@countrycanadian44 I use xr70 triple clamps and just any full size bars
@@twinzspeedshop5931 but can u use crf50 triple clamp on these forks or u need to swap to crf70
Wow niice bike 💯
nice 🤘😊
The eBay skid plate does not hold up well to a real hit the $88 for the bbr skid plate is 100% worth it for the genuine one
So far it’s held up great for what I do with it, time will tell what will happen 🤣
@@twinzspeedshop5931 deff time will tell I folded one of the cheap ones trying to wheelie onto the stand only will buy quality skid plates sense haha
@@jackmoran6045 for sure! I don’t get wild enough to ever hit the skid with this bike, just putt around and practice wheelies and all that fun jazz but I do want to do a bbr skid since this bike has a lot of good parts invested on it, need to protect them lol
That is one nasty machine! I'm not as good as you but I found a company t-bolt USA and I bought a modified engine I think they called it a Works engine!? Price was good they built the entire engine up for me new piston head carburetor gaskets rings intake Heavy Duty clutch they even installed it in their test machine ran it adjusted the jetting swapped oil again and send it to me as a complete engine including leaving all the wires hooked up the CDI coil ignition wires kill wire everything with plugged in all I had to do was put two bolts in sprocket chain exhaust system gas and I was ready to go. Vince could not be more helpful. Good luck with your racing or off-roading by the way pit bikes are a lot of fun the best hobby ever
How much did they charge for the motor ?