That's the first homemade portal boxes ive ever seen and they look awesome. I hope the forty chain is strong enough for the final drive if its not fifty will be. And thats one thing i like about the polaris quads especially the older ones is that the parts are pretty standard size lots of one inch shafts and i think some of the u joints are the same size as power take off (pto) parts
Thanks! I was originally going to use 520 chain as that seemed like the logical choice. I had a problem sourcing the 520 sprockets I wanted but they did have 420 size in stock. I thought about it and I think the chain has less torque transferred through it with the 3-1 gear reduction. The top 12 tooth sprocket is pulling a 36 tooth sprocket. A sprocket is just a lever. Bigger the driven sprocket, the more leverage. Thanks for the info about the Polaris.
Very impressive. Also impressive is the growth of your knowledge and skill in building vehicles in the short 2 years that you have been publishing videos here.
Your original build for this kart inspired me to build my own version. I literally just came back on YT to s find a method to make portal hubs, and found your video!!
That is pretty spectacular! Also very simple to build if you have a lathe & a mill ( I have both). You sir are very ingenious. I am very impressed. Thank you. Thank you very much.
@@kartbuilds697 mostly simple things. I’m retired military and was always interested in machining. I made a lot of friends who were, picked there brains a bit, and now bought the biggest gunsmith lathe and mill with a 48” table. I. Love making tools. Ask and I’ll tell you if I can.
If you used meshed gears instead of chain it should be stronger and no worries of the chain breaking. Nice job though. Only video ive seen that shows the building of portal axels.
I have so many questions. Let's start with "where's the torch shroud"? and "did you use any gas at all while welding?". Other than that, love the build!
Интересно, как будет работать привод, когда на одной оси крестовина и шрус? Ещё и расчёт на большой ход рычага. Я думаю, что будкт большое биение, на одной оси должно установлено, либо только крестовины, либо только шрусы.
@@kartbuilds697 had me having ideas for a red go kart frame I have. I have a dirt bike motor but don't have a welder and stuff been wanting to make it with suspension and a cage like a mini 2 stroke rock crawler
i didnt see you using a lathe, did you find tubing that fit the bearings that perfectly ? if so what tubing and bearings? i want to scale up and use on a midsize 4x4 . wonder if industrial chain will take the torque..
I used a lathe. Roller chain with tensioner(designed to take reverse load also) will work. The trick is to size it correctly. To big and it’s extra parasitic drag. Too small and it fails. Mine were one size too small.
Why did you use heims on bottom instead of ball joint to match the top?whats holding the lower shaft on the back side?could you explain how your going to seal it up a lil better?
The lower shaft has a small stop welded on the end. Watch video at 8:27 seconds to see it. It’s hard to see it just looks like a bunch of weld. The lower axle and upper cv shaft will have a cover plate over bearing with rtv silicone to seal unit. If I used a lower ball joint I was afraid it would interfere with lower axle cover. Thanks for the interest.
So basically, you used two CV Alex per side, both cut at different points and modified differently. One cut to accept the wheel hub and Hilliard clutch on the bottom, and one keyed to accept the jack shaft sprocket in the top?
Top axle is a hardened cv shaft. I drilled a 3/8 hole using a concrete drill bit to fasten the sprocket. The bottom axle is a 1” gokart axle with 1/4 keyway.
Polaris quad. 1995-2000 sportsman 4x4 any displacement. Polaris did change from a 1/4 keyway to a splined fit after the 2nd year. 1994 or 1995. As a side note.
@@kartbuilds697 super atv used to make them. I can’t figure out how I’m gonna engage the 4x4 is the issue and here’s the SKU: SAT-PGH-1-5-10 if you want to check them out.
Unfortunately it’s not for sale at the moment. I’m outfitting it for rock crawling the Rubicon trail. The 3-1 gear reduction in the portal boxes makes it a crawler. Top speed from 50mph to 15 mph.
I saw this before .they used to make them on old land rovers . What about if I use a tranferbox chain .. for my rig .would that be stronger ? Cause I went into skf website and I got lost in there 😂😂😂 .
That's the first homemade portal boxes ive ever seen and they look awesome. I hope the forty chain is strong enough for the final drive if its not fifty will be. And thats one thing i like about the polaris quads especially the older ones is that the parts are pretty standard size lots of one inch shafts and i think some of the u joints are the same size as power take off (pto) parts
Thanks! I was originally going to use 520 chain as that seemed like the logical choice. I had a problem sourcing the 520 sprockets I wanted but they did have 420 size in stock. I thought about it and I think the chain has less torque transferred through it with the 3-1 gear reduction. The top 12 tooth sprocket is pulling a 36 tooth sprocket. A sprocket is just a lever. Bigger the driven sprocket, the more leverage. Thanks for the info about the Polaris.
Very impressive. Also impressive is the growth of your knowledge and skill in building vehicles in the short 2 years that you have been publishing videos here.
Thank you! I appreciate the encouraging comment.
Your original build for this kart inspired me to build my own version. I literally just came back on YT to s find a method to make portal hubs, and found your video!!
That’s crazy! Thanks for the comment. Good luck with your build.
Frickin genius build man thumbs
Thanks man!
That is pretty spectacular! Also very simple to build if you have a lathe & a mill ( I have both). You sir are very ingenious. I am very impressed. Thank you. Thank you very much.
Thank you! What have you made with your machine tools?
@@kartbuilds697 mostly simple things. I’m retired military and was always interested in machining. I made a lot of friends who were, picked there brains a bit, and now bought the biggest gunsmith lathe and mill with a 48” table. I. Love making tools. Ask and I’ll tell you if I can.
Nice! I need a bigger lathe.
If you used meshed gears instead of chain it should be stronger and no worries of the chain breaking. Nice job though. Only video ive seen that shows the building of portal axels.
I love the the idea. You took it and ran with it. I think this is fantastic
Thanks brother.
I have so many questions. Let's start with "where's the torch shroud"? and "did you use any gas at all while welding?". Other than that, love the build!
Flux core wire. Built in shield
I hope to see more videos this was super cool!!!!
Thank you! I appreciate the feedback.
Интересно, как будет работать привод, когда на одной оси крестовина и шрус? Ещё и расчёт на большой ход рычага. Я думаю, что будкт большое биение, на одной оси должно установлено, либо только крестовины, либо только шрусы.
@@kartbuilds697 had me having ideas for a red go kart frame I have. I have a dirt bike motor but don't have a welder and stuff been wanting to make it with suspension and a cage like a mini 2 stroke rock crawler
Start with purchasing an inexpensive mig welder and a 4 1/2” grinder. You can build what you dream of.
❤️ ❤️ ❤️ ❤️ Welcome back!
Thanks brother!
I like it 👍🏻
Thanks brother! What kind of builds do you do?
@@kartbuilds697 Little bit of everything, just need to roll the camera more and get some more content!
i didnt see you using a lathe, did you find tubing that fit the bearings that perfectly ? if so what tubing and bearings? i want to scale up and use on a midsize 4x4 . wonder if industrial chain will take the torque..
I used a lathe. Roller chain with tensioner(designed to take reverse load also) will work. The trick is to size it correctly. To big and it’s extra parasitic drag. Too small and it fails. Mine were one size too small.
Hello! Where can I get ahold of those Hilliard clutches?
eBay or Amazon
Why did you use heims on bottom instead of ball joint to match the top?whats holding the lower shaft on the back side?could you explain how your going to seal it up a lil better?
The lower shaft has a small stop welded on the end. Watch video at 8:27 seconds to see it. It’s hard to see it just looks like a bunch of weld. The lower axle and upper cv shaft will have a cover plate over bearing with rtv silicone to seal unit. If I used a lower ball joint I was afraid it would interfere with lower axle cover. Thanks for the interest.
@@kartbuilds697 sweet. Love you using all these older polaris parts.
So basically, you used two CV Alex per side, both cut at different points and modified differently. One cut to accept the wheel hub and Hilliard clutch on the bottom, and one keyed to accept the jack shaft sprocket in the top?
Top axle is a hardened cv shaft. I drilled a 3/8 hole using a concrete drill bit to fasten the sprocket. The bottom axle is a 1” gokart axle with 1/4 keyway.
What is that hillard clutch out of?
Polaris quad. 1995-2000 sportsman 4x4 any displacement. Polaris did change from a 1/4 keyway to a splined fit after the 2nd year. 1994 or 1995. As a side note.
Think you could make sum of these that us the atv strut ?
The gear reduction would be tricky to incorporate into the strut
@@kartbuilds697 super atv used to make them. I can’t figure out how I’m gonna engage the 4x4 is the issue and here’s the SKU: SAT-PGH-1-5-10 if you want to check them out.
Почему сварка без наконечника?
How much I want it ,I'm seriously looking for an AWD rally Cart like this kinda ,I was thinking a ykz but I hear they tip really easy
Unfortunately it’s not for sale at the moment. I’m outfitting it for rock crawling the Rubicon trail. The 3-1 gear reduction in the portal boxes makes it a crawler. Top speed from 50mph to 15 mph.
Do you have plans available for purchase for the portals ?@@kartbuilds697
I saw this before .they used to make them on old land rovers . What about if I use a tranferbox chain .. for my rig .would that be stronger ? Cause I went into skf website and I got lost in there 😂😂😂 .
That is a possibility. I sized my chain one size too small and they eventually broke.
How much did it cost you to build the portals??
Bearings, chain, sprockets,metal, misc. parts- 600$ is just a guess.