Motorized Bicycle: Save time by adjusting the length of your chain the right way
Вставка
- Опубліковано 5 жов 2017
- This method will save you a lot time and trouble.
I forgot to mention that you want to remove the standard master link and use the 415 half link as your new master link.
When installing the half link, you want to use the chain break and retract the pin on the chain break a bit and use that to push the pin on the 415 half link as you tighten on the break.
REMINDER: The looped end of the cotter pin should always face the direction of forward travel in the chain.
www.bikeberry.com/415-half-lin...
www.ebay.com/sch/i.html?_nkw=... - Авто та транспорт
I have been wrenching on machinery and motorcycles forever and never heard of these links, thank You!
Great video explaining how to install the 415 chain
You can buy half links for the bike chain as well. Very handy indeed!
Very good advice, That is exactly the proper way to do it. I've done it the very same way for years. Great video!
Thanks for the information and I have been one of those guys who are getting frustrated with the Chinese stock chain tensioner that comes with the kits...total junk and dangerous looking. I’m new at this cool hobby of motorized bikes.
check out my duluth chain tensioner review.
thanks for the info and link,
Did this but the half link just gets stuck inside the engine sprocket :/
what do i do I lost the cotter pin..any diy!
What you using for the tensioner where the chain goes on?
Hey just wanted to know where you got your rim and tire from? Great video
The wheel can be purchased here
BBR Tuning 26 Inch Heavy Duty Front Mag Wheel for Mountain Bikes, Beach Cruisers, Hybrid Bikes and Motorized Bicycles (White) www.amazon.com/dp/B076PWYSFS/ref=cm_sw_r_other_apa_i_TycqEbYAQZMVG
The tire can be purchased here
Serfas Drifter Tire with FPS, 26 X 2.0-Inch www.amazon.com/dp/B001VE14QI/ref=cm_sw_r_other_apa_i_IAcqEbBCV6HAM
"standard master link and use the 415 half link" what is the difference?
Yes I bought the half lenth but the chain replacement don't fit
How long you been Useing that frame,someone told me they crack easy. I also noticed to have the rubber between your front mount and motor, how is that working for you does it seem like it's less vibration?
michael reyes, I have had the frame for almost a year. And yes you are correct. The pedestal mount can and does have the potential for shearing right off under the high amount of torque and vibration. It happened with a guy I sometimes ride around with who has the same frame. When I bought my gasbike frame, I instinctively purchased the rubber cushion to lessen the vibration that I felt and also as precaution to help prevent the pedestal mount from breaking off. I recommend to everyone who has these frames to purchase and use the rubber cushion.
Thanks for the heads up, What size engine are you using?
michael reyes, 66cc; zeda 80.
Why does it fit when told exactly what u said
BUY A HALFLINK! it saved me so much hassle
Yes why doesn't thehalf lenth does not fit why
What size is the chain on the right side?
Not sure. Its the stock bike chain.
Yes I bought this half like but the master lik don't fit
Yes I bouthbthis half link but the master link don't fit
So I put 1/2 link on,felt tightish,took it for test spin,bike was bucking too much,any ideas?? Thank you
I would suggest removing g the half link and if possible, pull your rear wheel back in the dropouts and tighten.
@@BicycleMotorsports Tried taking 1/2 link out but now peddle side chain too loose,and skips,maybe I'll do the Fred Flintstone start method,lol.Thanks for suggestion.
What kind of free wheel are you using
I'm not sure.
What size rear sproket
Jose Robles, it's a 36 tooth stock sprocket and disc biscuit that comes with the bbr tuning frame.