Agree with you. If I’m after tips I want to know verbally what is going on, not listen to terrible music, whilst trying to look at a video, read badly placed wording, and look at my camera, all at the same time. Save your time next time Victure, and don’t bother. Still no wiser how to set up my camera, so if anyone out there has had an error message”Unplug card” please let me know. Grateful.
my camera takes a picture every minute even though there is nothing passing - i.e. it appears to be on all night through - I have set it to operate between 22.00 hours and 06.00 hours - it is set on a 1 minute interval- how do I get the camera to take a photo only when something moves in front of it. Thanks
Sorry but it is just so hard to see what is on the screen. I was looking for a video to show me how to operate the device ( I have lost my instructions) and this video provided nothing useful.
Agreed with most of the comments below, that this video is worse than useless, and the "music" is too loud and the "instructions" too small and too brief. I've got this same camera in Australia where it was sold uner the brand name of "NEXTECH and widely available up till mid 2020 from the popular Australian electronic gadget shop called JAYCAR. The most important thing to note (and it certainly wasn't stated in this video) is the discreet 3 way switch: 1: "OFF" - Camera does nothing 2 (Middle position): "TEST" which really is a terrible name for ALL SETTINGS & REVIEW YOUR PHOTOS AND VIDEOS A:READY RECORDED (but try writing that in that limited space, you,d have Buckley's !) 3: "ON" - Camera is in standby mode to record either videos, photos or videos AND photos Also too, even though there are eight slots for eight AA batteries, you only need the top four slots to have four (fresh) AA batteries, the bottom four slots are backup batteries when the top four run out of juice - as the transformer confirms that the camera only needs 6 volts (hence 4 x 1.5 volt batteries) at any one time. And yes, if you've lost the instructions (which aren't the best in any case) and you can't switch the damn thing on via the password, just type in the default password: OPEN
please make a video showing how to set up the camera for use, the instructions shipped with the camera are unclear. if i spend too much more time trying to figure it out i will probably just return.
Got this camera 3 years ago and forgot how to use it, lost manual now this was not helpful. All I seen was a hand pressing buttons. Would it not have been better actually explaining what your doing...was like watching my 16 year old son showing me how to use something 🤷♀️
Would help if the type intructions were a bit larger..that was frustrating to just be able to see the heading.. And the computer? What did that explain? Other than take batteries out first. Thank you for that.
Fortunately I have a relatively good written instruction manual from the Australian distributor, Jaycar. To those of you who can’t unlock the useless camera , just type in the default password: OPEN
My trail cam is gone to a white screen with some fuzzy blue shades but it will not work anymore, I did get it back on and was setting it but it only lasted a few minutes and now it's back to just a white screen. Is there any help???
Well, I thought I'd ignore the negative comments and watch the video. But I have to agree with everyone - what a useless video. Couldn't read the text - strange font, far too small and not shown long enough. Got to an interesting point and suddenly I'm looking at the camera in a long shot and cannot see what's happening on the screen. Didn't even enjoy the music and am about to return the camera as we cannot figure out how to set it up and record with it. The instructions are in English, no doubt translated from Chinese by a Russian, and are of little help.
after setting it up and putting it in "on" mode It doesn't have any pictures stored. I done everything as instructed in manual. is anyone else having this problem?
card locked problem? i tried dozens of sd cards,i unlocked them but the camera still shows me that the card is locked. wtf is that problem and how can i solve it? it makes me angry!!!!!!!!!!!!!!!!!!!! hc200
Fortunately I have a relatively good written instruction manual from the Australian distributor, Jaycar. To those of you who can’t unlock the useless camera , just type in the default password: OPEN
Fortunately I have a relatively good written instruction manual from the Australian distributor, Jaycar. To those of you who can’t unlock the useless camera , just type in the default password: OPEN
Victure, you sent me a camera advertised as HD but that did not even have a camera installed in it that was even capable of recording HD. The file sizes helped confirm my suspicions and unfortunately I was not able to disassemble it and take pictures of exactly what components were installed in it, I needed a security camera ASAP and yours failed me. And yes I tried every quality setting and would have updated FW if it had existed. Now either your company is installing sub-hd cameras in it to save money (a scam) or your supply chain is contaminated and your QC department missed it. Either way I'm not real impressed.
The factory does not send it with a pass code. If your got your Visa 2and hand source thg then they would have had to set a password and you'll have to contact them. Victor may have a reset action they can share with you.
Fortunately I have a relatively good written instruction manual from the Australian distributor, Jaycar. To those of you who can’t unlock the useless camera , just type in the default password: OPEN
All Victure trail cams HC200/300/400/600 share the same CMOS sensor. It has only 5 Mpix native resolution. The 12/16/20 MPix are just extrapolated images. You'd better shoot at 5 MPix and increase the size with your prefered imaging software/app, the result will be far better and you will save a lot of memory.
Hi, nice demonstration but I have a question .. do I need to take a few pics of the area around as I saw in Victure UA-cam channel so the camera can detect the motion
Any ideas on why my SD card is showing in the top right of the LED screen, it has an arrow pointing downwards underneath the SD icon on the screen. The SD card is new, it had captured images which i have deleted, but it still appears on the screen, doesnt seem to be capturing anything since?
Totally agree on the uselessness of this video. Has anyone had any success on doing a Time-Lapse video on this damned camera ? It will only take one shot every five seconds, I was hooping for a shot every second at least, and then I have, say 50 individual photos , so how do I then string this seperate images into one continuous movie ?
It's way to fast to see what your doing??? The writing on the screen disappeared off the screen way to quickly to read it all. You really need to slow it down. I have learnt nothing😔
Absolute garbage. Mine kept shutting itself off with no explanation on this pointless video. Sent it back. Avoid buying victure. Other, and much better brands are available
Agree with you. If I’m after tips I want to know verbally what is going on, not listen to terrible music, whilst trying to look at a video, read badly placed wording, and look at my camera, all at the same time. Save your time next time Victure, and don’t bother. Still no wiser how to set up my camera, so if anyone out there has had an error message”Unplug card” please let me know. Grateful.
"Chocolate Fireguard" springs to mind
my camera takes a picture every minute even though there is nothing passing - i.e. it appears to be on all night through - I have set it to operate between 22.00 hours and 06.00 hours - it is set on a 1 minute interval- how do I get the camera to take a photo only when something moves in front of it. Thanks
Turn off the music and tell me what you're doing. Let me see the screen better also.
This is about as good as the manual that it came with. Tells you nothing.
well this was about as useful as a cross-eyed sniper
so no tips at all, just someone pressing buttons and some lame musac, why go to all that trouble
They don't even bother taking the time to show people what exactly they're pushing on the set up and the options. Very poor teaching video.
The only informative aspect of this video is the public comments below.
Sorry but it is just so hard to see what is on the screen. I was looking for a video to show me how to operate the device ( I have lost my instructions) and this video provided nothing useful.
Agreed with most of the comments below, that this video is worse than useless, and the "music" is too loud and the "instructions" too small and too brief. I've got this same camera in Australia where it was sold uner the brand name of "NEXTECH and widely available up till mid 2020 from the popular Australian electronic gadget shop called JAYCAR. The most important thing to note (and it certainly wasn't stated in this video) is the discreet 3 way switch:
1: "OFF" - Camera does nothing
2 (Middle position): "TEST" which really is a terrible name for ALL SETTINGS & REVIEW YOUR PHOTOS AND VIDEOS A:READY RECORDED (but try writing that in that limited space, you,d have Buckley's !)
3: "ON" - Camera is in standby mode to record either videos, photos or videos AND photos
Also too, even though there are eight slots for eight AA batteries, you only need the top four slots to have four (fresh) AA batteries, the bottom four slots are backup batteries when the top four run out of juice - as the transformer confirms that the camera only needs 6 volts (hence 4 x 1.5 volt batteries) at any one time.
And yes, if you've lost the instructions (which aren't the best in any case) and you can't switch the damn thing on via the password,
just type in the default password: OPEN
Anyone else notice she only put 4 batteries in this thing? Didn't see that in the instructrons :)
please make a video showing how to set up the camera for use, the instructions shipped with the camera are unclear. if i spend too much more time trying to figure it out i will probably just return.
Can anyone say please how do you delete individual photos ?
Got this camera 3 years ago and forgot how to use it, lost manual now this was not helpful. All I seen was a hand pressing buttons. Would it not have been better actually explaining what your doing...was like watching my 16 year old son showing me how to use something 🤷♀️
Would help if the type intructions were a bit larger..that was frustrating to just be able to see the heading.. And the computer? What did that explain? Other than take batteries out first. Thank you for that.
alaysia kaye butler I agree 100 % is ridiculous, need to send on a magnifying glass to see anything!
Victure HC200. - is it 15 or 24 or 30 fps second the wensite doesnt say
how do you reset it if you forgot or cant remember your pass code ???
Fortunately I have a relatively good written instruction manual from the Australian distributor, Jaycar. To those of you who can’t unlock the useless camera , just type in the default password: OPEN
I have one that i have never used and watching all the choices and multiple button pressing i doubt i ever will.
My trail cam is gone to a white screen with some fuzzy blue shades but it will not work anymore, I did get it back on and was setting it but it only lasted a few minutes and now it's back to just a white screen. Is there any help???
Well, I thought I'd ignore the negative comments and watch the video. But I have to agree with everyone - what a useless video. Couldn't read the text - strange font, far too small and not shown long enough. Got to an interesting point and suddenly I'm looking at the camera in a long shot and cannot see what's happening on the screen. Didn't even enjoy the music and am about to return the camera as we cannot figure out how to set it up and record with it. The instructions are in English, no doubt translated from Chinese by a Russian, and are of little help.
after setting it up and putting it in "on" mode It doesn't have any pictures stored. I done everything as instructed in manual. is anyone else having this problem?
Yes, just bought one through Amazon - exactly same problem.
Yes!
Same thing here! IS GOING BACK IN A HURRY!,,
What does time switch mean please
card locked problem? i tried dozens of sd cards,i unlocked them but the camera still shows me that the card is locked. wtf is that problem and how can i solve it? it makes me angry!!!!!!!!!!!!!!!!!!!! hc200
Fortunately I have a relatively good written instruction manual from the Australian distributor, Jaycar. To those of you who can’t unlock the useless camera , just type in the default password: OPEN
FInally, the answer i was looking for. Thank you!!!!
it works to unlock the card ?
Thought you would talk about fault finder? My screen on device is showing fuzzy features when connected to the computer?
How do you retrieve deleted videos?
This video is not very Dyslexic friendly. I have a new camera and I am looking for help to set it up but not here.
Ich habe eine Kamera WK 5A 2 Ich habe das Passwort vergessen, wie ich es öffnen soll
I have misplaced my password and cannot use my camera...any advice would be greatly appreciated. thak you
Fortunately I have a relatively good written instruction manual from the Australian distributor, Jaycar. To those of you who can’t unlock the useless camera , just type in the default password: OPEN
Hi. I'd like to know how you set timer from 6pm - 6am just bought camera.dont show you in manual..thanks..
How do you reset your password?
Victure, you sent me a camera advertised as HD but that did not even have a camera installed in it that was even capable of recording HD. The file sizes helped confirm my suspicions and unfortunately I was not able to disassemble it and take pictures of exactly what components were installed in it, I needed a security camera ASAP and yours failed me. And yes I tried every quality setting and would have updated FW if it had existed.
Now either your company is installing sub-hd cameras in it to save money (a scam) or your supply chain is contaminated and your QC department missed it. Either way I'm not real impressed.
How get Software Update??
Anyone have a original factory 4 digit passcode please lost mine
0000
Tom Golcher doesn’t work 0000 buddy
The factory does not send it with a pass code. If your got your Visa 2and hand source thg then they would have had to set a password and you'll have to contact them. Victor may have a reset action they can share with you.
Fortunately I have a relatively good written instruction manual from the Australian distributor, Jaycar. To those of you who can’t unlock the useless camera , just type in the default password: OPEN
Far too small writing and to fast to pause!
TELL US HOW TO DO THE FIRMWARE UPDATE
do you discover friend?
If I want music I go to my hi-fi....🤫
All Victure trail cams HC200/300/400/600 share the same CMOS sensor. It has only 5 Mpix native resolution. The 12/16/20 MPix are just extrapolated images. You'd better shoot at 5 MPix and increase the size with your prefered imaging software/app, the result will be far better and you will save a lot of memory.
Thankyou for video 👍👍
Hi, nice demonstration but I have a question .. do I need to take a few pics of the area around as I saw in Victure UA-cam channel so the camera can detect the motion
no help here.....
Well, you’ve got all your B-Roll ready. Now, when are you going to finish the actual video?
The written instructions are too small. It doesn't matter how in-depth the video is if you can't read the instructions. Please improve
I bought one but it has a password how do I find the password
Put open and it will reset password
this video is about as useful as a chocolate teapot
Any ideas on why my SD card is showing in the top right of the LED screen, it has an arrow pointing downwards underneath the SD icon on the screen. The SD card is new, it had captured images which i have deleted, but it still appears on the screen, doesnt seem to be capturing anything since?
Just bought one of these from Amazon, doesn't power up at all - another poor quality product from Chinese electronics manufacturers :(
my experience exactly ...utter rubbish waste of money
Yep, still useless in 2021..Dead on arrival and customer service clueless.
Totally agree on the uselessness of this video. Has anyone had any success on doing a Time-Lapse video on this damned camera ? It will only take one shot every five seconds, I was hooping for a shot every second at least, and then I have, say 50 individual photos , so how do I then string this seperate images into one continuous movie ?
This is less than useless - there is a more detailed pdf instruction guide in govicture.com web site - just going to give that a go instead.
No instructions there.
It's way to fast to see what your doing??? The writing on the screen disappeared off the screen way to quickly to read it all. You really need to slow it down.
I have learnt nothing😔
The video could have been shorter
Agree with these comments........how about some useful commentary
I liked the music.
Music makes me me want to Die immediately. Smh damnnnnn
Doesn't help with troubleshooting
Terrible video!! Words to small to read 🤔
Music was unnecessary
i found it helpfull
I would like to hear someone talking, this doesn’t help me….
This doesn't tell you anything what a joke
Absolute garbage. Mine kept shutting itself off with no explanation on this pointless video. Sent it back. Avoid buying victure. Other, and much better brands are available
???????
Useless.
Nice to see.what the F your doing
...😪👎