Very nice, clean, easy quick build!!!! No worries with engineering pistons and what not lol. I built it in slightly different sizing being in the U.S., but it does work quite well, thank you!!!
I have a pile of different tips for a fancy heat gun I have was gonna try to make dredge fit this tips for exactly what you’re sayin. Suck in cracks really skinny or thin wide tip for bigger ones. Etc. just threw that out there cause they are gonna be perfect I believe thought maybe you’d wanna look into it since you’re talking tips. 😂
@@jimmylarge1148, wouldn't have thought of that. I have a bunch of tips for a hobby oxy-axcetaline torch setup at a yard sale, no tanks though, and that Mapp gas or benzine(?) Heat torch.
Try using 2x 30mm washers with a peice of thong squashed between them. You can join this to your already made pump by drilling a hole in your end cap, fastening with a bolt and springwasher and nut. Last quite a while and when it does start to lose suction all you need to do is tighten it up, squashing the thong even more.
Thanks mate its been a while since doing a video I haven't been out to much been doing a lot of fishing aswel but the bug is biting, might slap together a video of tomorrows outing! How have u been going with the Gold?
@@beanysgold963 really good ATM mate, got a nice patch I go to with the gold monster, been putting some good videos up too. If you ever head over Ballarat way yell out
Why don't you use a wider pipe, like 90mm etc. Does it make for too heavy a load? I'm sure there's a good reason, I'm just wondering and thanks heaps for the vid!
Went to Home Depot and ask for the pvc pipes you mention in mills and they looked at me like I grew a turnip on my head. Anyone have these measurements in Inches?
The one in the photo was about 35cm long in the shaft but about 45cm all up without a nozzle attachment on the end, perfect for putting into a backpack for a long hike to the creek
what’s the mil stuff? stay away from those global standards. thought you guys stayed with the inch, foot, yard, etc.. The foot was the lenghth of the kings foot. and so on, but you know that.
The best assembly I have seen so far. Thanks a lot.
Very nice tutorial. Cheap and simple👍
Very nice, clean, easy quick build!!!! No worries with engineering pistons and what not lol. I built it in slightly different sizing being in the U.S., but it does work quite well, thank you!!!
Man this was the most simple and productive. Thank you for sharing this with us.
Thanks for the info my fellow prospector! Cheers to you and yours!
Thanks for the video.
Great!! Thank you for providing this.
Thanks man! We'll explained can't wait to make mine
Thanks bro, got mine built thanks to you
Thank you! Small for my back pack.
Great video have to make one got one from crevice king but like that one cheers Glenno.👍😎
You could also make an adapter fitted with a PEX tube or other small hand made crevice wand like you demonstrated.
lovely build - thank You for sharing
Just 1 thing - try to learn about having your phone set up on its side so your tape will come out widescreen
Thanks for sharing your hand dredge build. I subbed. 😎😎⛏⛏🔥🔥
Nice. Ill make this today.
I watch your video and now i m relax to make hand dredge thanks buddy,nice share take care.
Awesome, thanks
With multiple reducers you could bring the nozzles down to pex tube size or make smaller sizes of crevice nozzles to increase the suction.
I have a pile of different tips for a fancy heat gun I have was gonna try to make dredge fit this tips for exactly what you’re sayin. Suck in cracks really skinny or thin wide tip for bigger ones. Etc. just threw that out there cause they are gonna be perfect I believe thought maybe you’d wanna look into it since you’re talking tips. 😂
@@jimmylarge1148, wouldn't have thought of that. I have a bunch of tips for a hobby oxy-axcetaline torch setup at a yard sale, no tanks though, and that Mapp gas or benzine(?) Heat torch.
Wow thank you. New to prospecting very easy to follow. Official new sub ❤
Thanks for taking the time to watch! Great to see more people getting into prospecting. All the best and I hope you find some shiny stuff 🙂
Its nice brother.
Thanks very much
nice i got my keene A23 off craigslist for $25. the big one. have a good day.
Try using 2x 30mm washers with a peice of thong squashed between them. You can join this to your already made pump by drilling a hole in your end cap, fastening with a bolt and springwasher and nut. Last quite a while and when it does start to lose suction all you need to do is tighten it up, squashing the thong even more.
Mint!
Nice job mate, I was wondering what happened to you, welcome back 🤠⛏️🇦🇺
Thanks mate its been a while since doing a video I haven't been out to much been doing a lot of fishing aswel but the bug is biting, might slap together a video of tomorrows outing! How have u been going with the Gold?
@@beanysgold963 really good ATM mate, got a nice patch I go to with the gold monster, been putting some good videos up too. If you ever head over Ballarat way yell out
Why don't you use a wider pipe, like 90mm etc. Does it make for too heavy a load? I'm sure there's a good reason, I'm just wondering and thanks heaps for the vid!
Excellent report mr beans ..😁pip pips and carryon pilgrim
E foam for the seal
Went to Home Depot and ask for the pvc pipes you mention in mills and they looked at me like I grew a turnip on my head. Anyone have these measurements in Inches?
What length did you make this one?
The one in the photo was about 35cm long in the shaft but about 45cm all up without a nozzle attachment on the end, perfect for putting into a backpack for a long hike to the creek
Nice project, but really, vertical format video is only suitable for TikTok dance videos -- it's like looking through a partially open door.
If we call it hand dredge it makes it unlawful to use in my state. So it a crevis sucker.
2:46 where did you get the foam seal from
I can’t work that out either
2 pulls and the "pipe insulation" deaerates. but if you use your brain it still works
Do you live in Australia buy a yabbie pump so much better
Keep in ming to build on so you can put different tips on it.
If I don't have a blue tape, can I use the black? 😂
У нас тоже без синей изоленты ни как 🤣
what’s the mil stuff? stay away from those global standards. thought you guys stayed with the inch, foot, yard, etc.. The foot was the lenghth of the kings foot. and so on, but you know that.
Isn't it MM and not ML? These measures you use are nor canadian 😆