plan on buying one and soldering the ethernet to the consoles board but i need to know before hand, after jailbreak is done and if i have it set to not shutdown the pico, can i plug back in my ethernet and connect to my router or does the pico need to be off. wondering since i plan to keep it on and plugged into my computer to be able to SSH and read UART data. if unsure could you please try to… keep the pico on after jailbreak, and try to connect to ethernet. i asked modded warfare and to no surprise… no response… too much clout ig
Sir I'm having a problem. After following the steps I couldn't find any Maskrom 2884 after holding the boot button for 2 secs. Is it something to do with my antivirus?
@@ARG I just tried it with another cable that's only for data specific but it shows on devices and printers under the name of "rk3xxx" but still no signs of Maskrom 2884
If you ask me using a pi3 is a waste as you can do so much more like use it as an emulation beast. No advantage using a luckfox apart from they are cheap and small.
@@ARG I had an extra one not being used, if I didn't have anything I'd use the Luckfox. Watching videos of tryin to crack, it doesn't seems slower then the pi.
That’s a Linux thing, just type it and push enter. It will work and they do it this way as an extra security measurement as if you are seen typing it in they don’t even know how long the password is.
@@jdcjr999so you need the goldhen payload on usb stick and this is just a one time thing so format the usb stick to fat32 and get the one you need from ko-fi.com/s/8089b4c5b2
Thank you. Are there any speed differences between Mini A, B, Plus, Max or Pro? Which one will jailbreak as fast as possible? Will you try this inside build in future?
@@ARG Hey! In previous video! You showed how to set up LuckFox Pico Pro Max! Now i have done all of things from my friends house, and now if i go to my house and connect the LuckFox and try ro jailbreak it will be there any problem? Because i used putty in my friend house connected the luckfox connected to wifi router of his! (I don't have pc)
Cheers for the update, I will have ago at an internal with the miniB
Algorithm boost time :)
plan on buying one and soldering the ethernet to the consoles board but i need to know before hand, after jailbreak is done and if i have it set to not shutdown the pico, can i plug back in my ethernet and connect to my router or does the pico need to be off. wondering since i plan to keep it on and plugged into my computer to be able to SSH and read UART data. if unsure could you please try to… keep the pico on after jailbreak, and try to connect to ethernet. i asked modded warfare and to no surprise… no response… too much clout ig
Which option should I choose in pppwn when using software version 10.50? It is true that goldhen is called payload and is already on the pendrive.
My ps4 just shut off and it stopped working, how can I have it to start working again
Sir I'm having a problem. After following the steps I couldn't find any Maskrom 2884 after holding the boot button for 2 secs. Is it something to do with my antivirus?
make sure the usb cable you have can do data as some are made just for charging.
Try another cable.
@@ARG I just tried it with another cable that's only for data specific but it shows on devices and printers under the name of "rk3xxx" but still no signs of Maskrom 2884
@@senpaishanixyou did install the driver right ?
@@ARG Yes I did. Still no signs of Maskrom
i find if you go into ps4 network settings and uncheck and check the internet it works fast on my ps4
hi friend, I'm using a Luckfox pico A but I can't install the firmware..
you need to do the sd card method as the mini A has not got any storage built in.
I currently use a Pi3. Aside from being smaller and able to stash inside, is there any advantage to using a luck fox.
If you ask me using a pi3 is a waste as you can do so much more like use it as an emulation beast.
No advantage using a luckfox apart from they are cheap and small.
@@ARG I had an extra one not being used, if I didn't have anything I'd use the Luckfox. Watching videos of tryin to crack, it doesn't seems slower then the pi.
To much steps, some troubleshoot tutorial? can i do jailbreak without pi device? thanks
i followed the tutorial i can type root and when its time to enter the password it will not recognize key strokes what did i do worng
That’s a Linux thing, just type it and push enter.
It will work and they do it this way as an extra security measurement as if you are seen typing it in they don’t even know how long the password is.
@@ARG that worked perfect next road block is it says luckfoxed but says payload not found 9.60
@@jdcjr999so you need the goldhen payload on usb stick and this is just a one time thing so format the usb stick to fat32 and get the one you need from ko-fi.com/s/8089b4c5b2
@@jdcjr999or here github.com/GoldHEN/GoldHEN/releases/tag/2.4b17.3
When can we achieve the goal of not inserting a USB drive?
You only need it once and it will copy to HDD so you will not need it again it's no big deal tbh so can't see them working to remove that requirement.
Do you have any socials anymore?
Yeah I have insta, X, and tik tok but i hate tik tok 🤣
Insta is jp_from_alien_gaming
i simply cant drag and drop the pppwn luckfox folder over to moba, any help please
did you unzip it first so its just the folder ?
Yes mate unzipped and renamed
I got the same problem, it won't let me drag and drop, what should i do?
Am getting obtain io address failed
Hi, mine only username prompt no password prompt and when i enter password it says root luckfox not found. Pls help
You might need to flash it again
Thank you. Are there any speed differences between Mini A, B, Plus, Max or Pro? Which one will jailbreak as fast as possible? Will you try this inside build in future?
From all my testing I have noticed no difference between them and I have done an inside build already so look at my video on that.
Can you do this on firmware 9.0?
yes it supports 9.00
@@ARG thanks! Will try and follow the steps provided on my ps4 pro.
@@ARG Hey! In previous video! You showed how to set up LuckFox Pico Pro Max!
Now i have done all of things from my friends house, and now if i go to my house and connect the LuckFox and try ro jailbreak it will be there any problem? Because i used putty in my friend house connected the luckfox connected to wifi router of his!
(I don't have pc)
please tsl thingiverse
I need to edit the design as it will only print on a resin printer so need to make a change for FDM printing.
@@ARG thank you for your kind answer, I will wait ..... no rush thanks for the tuto, one more subscriber you earned.