Diagnosing & Repairing P0544 EGT sensor 1 malfunction on CJAA TDI

Up today we're getting the Tunezilla / malone tune dialed in by fixing the P0544 Bank 1 sensor 1 EGT sensor malfunction. This wasn't active with the MR Tuning file but the Tunezilla / malone tuning obviously use this sensor to keep EGT's in check.
Use the link tunezilla.com/...
Or code JoshsJettas-10 at tunezilla.com for a 10% discount off your tune from Tunezilla / Malone tuning.

[@kevinnolan9645]

With any of the tunes you have tried B1S1 02 sensor what is a normal reading after installing a tune? I ask because mine is reading 0.0.

[@JoshsJettas]

What group are you looking at? I can see what these are reading.

[@kevinnolan9645]

@@JoshsJettas what turner, measuring block or scaner?

[@kevinnolan9645]

I have a reading with vcds measuring block 034.

[@JoshsJettas]

Ive got rpm, load, lambda and lambda. MR Tuning reads 99% at idle and they all drop as engines loaded up, switching to tunezilla shortly

[@kevinnolan9645]

Thank you for checking not sure why my other scanner showed 0 when pulling up live data.

[@joebarr8164]

Hey i have a 2015 vw passot and I got the pO544 code. We'll it's actually 3 codes all p0544 one says pending the other Says perment and one says temporary. I replaced the egt sensor 1 bank one with a brand new one from dealer. I cleared the codes but I only cleared 1 code. Still have the flashing glow plug light car is deleted for off road use please help

[@JoshsJettas]

I haven’t dug too far into the 15’s yet but is there a possibility the wrong one was changed? Have vcds to compare sensor temps?

[@ericmartinez5633]

I have a 2015 mrtuning. I think the tunes supposed to delete all sensors. Besides the egt pre turbo. I have flashing glow plug and check engine light exhaust gas temp sensor same 1 as you. How do I tell what sensor it is so that I can make sure it’s plugged in