These MASSIVE Old Tractors Came With Our New Airport!!!
Вставка
- Опубліковано 17 тра 2024
- Use code CLEETUS50 to get 50% OFF your first Factor box plus 20% off your next box at bit.ly/48fuHYr!
Today we spent our afternoon firing up and using the old tractors that came with Bald Eagle Airfield. This giant roller really does the trick for flattening out ruts on the runway, what a cool machine!!! John Deere 4440's are one of the best tractors ever made!!!
Visit cleetusmcfarland.com to check out all of our Cleetus shirts, hats, stickers and more!
FREEDOM FACTORY in person tickets - www.thefoat.com/freedomfactory
For advertising inquiries, email Cleetus@outloudtalent.com
Our 2024 Sponsors:
www.holley.com
texas-speed.com
www.motionraceworks.com
www.nittotire.com
www.summitracing.com
heatwavevisual.com - Фільми й анімація
Use code CLEETUS50 to get 50% OFF your first Factor box plus 20% off your next box at bit.ly/48fuHYr!
Cleetus your the best thanks for all you do for us fans
Just came to say pee pee poo poo. Thank you for tuning into my podcast! 😂🫡
@@TRASHxSMITTY wtf
Hell yeah brother!🇺🇸
20,550 (approximate) weight for the concrete cylinder
The density of that specofic concrete is a factor... but that's a good approximation.
volume of cylinder is V = πr²h r=2.5415 ft h=6.75 ft
V= 136.97 ft^3
Density of concrete ranges quite a lot it seems, but we'll go with 140-150 lb/ft^3 for "normal concrete"
So probably weighs between 19175lbs - 20546 lbs.
The hero we needed
That’s nearly dead on with his guess of 10 tons
So cleetus was about right, about 10 tons
Cleets saviour
Ha, I used the same density. 19178lbs
Who else would love to see a full restoration on both tractors???
Yup, and enclose the cab on that 4440, Put some AC in there and some tunes.
Twin turbskies
This looks like a job for......
Cleet & Squirrel!!!!
Big block incoming
Jack stand has probably already sprayed it
Cleet, the 4440 is one of the all time greatest John Deeres ever made. It was the highest HP machine made by JD and still have a 540 PTO. Also, the 466T was one of the best engines ever made. You seriously have a classic on your hands.
I grew up pulling a bean drill with one. It got refurbished let’s say 7 years ago after I left home. Great machines.
JD750?@@relaxingdrives6075
I just love jackstands involvement, always there to help, always supportive, and has always seemed to be by Cleets side, he was a massive part in going 7s and obviously Zach and Tye have come in since but jackstand still stands by cleets side in anything he needs help for, he plays such a massive part in the channel, and I always love to see him involved
Now we're talking!! Those old 4440s are solid
Cleetus is a farmer at heart he just doesn't know it yet.
Still waiting for "I drove Millennial Farmer's Combine/Grain Cart/Tillage Tractor" to come across the feed. Lol
@@Matt-vg1fp maybe a 4440 could rip some crazy burnouts with the correct engine 🤔
Barney Rubble comin atcha!...... POW!!!
You know it, those old Deere's are great!
The 4440 is a quad range transmission. A-B-C-D are the ranges with four forward and two reverse gears in each range. Stop to change between ranges and use the clutch to shift between the 2-3 shift. The 1-2, 3-4 and r1-r2 shifts can be made without clutching. Also when it is hard to start you can turn the wheel back and forth while cranking and it will relieve hydraulic pressure in the pump and make it easier to start.
I was going to say the same about rocking the steering wheel. Beat me to it LOL. Great job on explaining the gearing too 👍🏽
These old rigs are so cool, I guess that's why they're called the Power Shift. They definitely don't make them like they used to.
@@Mdudeman13 it's a Quad range. The powershift transmission will shift through all gears without clutch.
I'm willing to bet he has Google too. 😂
What would ya’ll guess the year of that is?
9:00 tractor lives, cool af lil lizard casually crawls over fender, no one notices cuz its just normal there. Love it.
Looked like an anole
He single handedly starts the engine, he’s the lizard starter
Love the 4440!
If you need any dirt work done or runway expansions! We were the guys moving earth right next door for the new group of hangers next to Game comp during your visit!
Hollar if you have any questions and we would be glad to help!💪😎
Just followed I love building stuff!!
@@d.james.martin5844 my guy thank you!🤙
I appreciate that Cleetus invited Mike to hangout with them trying to start the tractor. He always makes sure to be respectful to his elders, include them in his projects, and listen to their wisdom. Unfortunately that is something that is not very common anymore. Keep it up Cleet!
Mike is the Sam of the airport. He must be protected at all costs.
Thank you for saying that. 👍👍👍☺️☺️
Mike is such an awesome guy! He's gonna be handy to have around! ...and entertaining, ha.
Most people take elders for granted. We can get most answers to any questions within seconds from our fingertips, but old timers have experience and wisdom that just can't be learned from some internet Google answer. I believe cleetus knows this as well. On top of that he has to be one of the most genuine, good hearted youtubers.
I 100% agree
you always find the old guys who want to hang out with you. You are cheering them up with the stuff you do and listening to their stories. Don't change Cleetus and cleetus crew.
I love hearing there story's to
@@chrisss103 same!!!
Honestly one of my favourite parts of this channel, I love the cars and stuff, but the respect for their elders and letting them hang out just creates such a great vibe.
Cleet is smart and mature enough to realize people be people. age, sex and otherwise doesn’t matter. You really limit yourself any other way
Right I love all the old folks!!😂
It's been 40 years since I did any farm work with tractors but if I remember right, the bushhog takes more maintenance than the tractors. We were using 1930s tricycle front end farm tractors and we were mowing brush on 2nd, 3rd and 4th year sprouts, though.
The rough terrain and brush was hard on the brushhogs.
Maybe that airport runway is a lot easier on everything including the tractor, the mower and the operator.
I love your post but I just want to add to your tricycle comment. That's actually called a Row Crop it's designed for churning the dirt into a V like a small ditch and it keeps the rows straight. That's why the tires are on an angle.
That's like famals and Oliver's days
Cleet I am a field tech at a JD dealer up in Canada hit me up if you ever have any questions or if the guys ever need service info down the road.
Also I highly recommend setting that unit up with an auto track system it will make whoever operates the tractor so much easier. Will let you track the tractor straight and set up your spacing so that you never miss any areas of the runway. Personally I’d recommend an ATU 300 and then you would also need a display and receiver the current models are G5 plus universal for the display and starfire 7000 receiver
Cleetus is the typa guy to put a 5 series monitor on a 4440 lol
I am Commercial Multi Engine Instrument, Commercial Rotorcraft/Helicopter, Private Single Engine Seaplane Pilot from Oregon. Owned my house on a 2250' lighted grass strip which I shared with 23 other homeowners. Mowed the airstrip regularly with an old Massey Ferguson tractor. We had a steel roller, but nothing like your concrete roller. It does my heart good to see you out there loving the experience just as much as I did when I was younger. Im now 67 and not flying anymore but all my flying memories are the best memories! Keep it up!
What a life, your attitude years laters goes to show that. Best of luck, sir!
Is that the airport in North Plains? I used to drive by it and saw the airplane garages and always thought it was so neat
My man!🫡
I am an Ag Leader installation tech, i autosteer all these tractors for a living, this tractor is super easy to setup and get autosteering so we can snap some perfect lines up and down the runway and make sure no spot gets missed
Old tractor, new technology.... America at it's best!
do you have a video of that? I think it would be cool to show doing!
I’d love to see an auto steer setup on this thing
Can you put auto steer on a 4240?
@@carlsondavis9997 They are amazing to watch. You can find videos where people fell asleep while "driving" them and getting stuck big time!!
The John Deere 4440 was apart of the Iron Horse series of tractors. 144 HP, it was extremely popular (and still is) as it is a beast of a unit! When people say "nothing runs like a deere" this is the tractor they are thinking of. It was made between 1978 and 1982. John Deere made two variants, one with a cab, and one without. The one with a cab is the most popular. The tag should be rivited somewhere on the back near the 3 point. The John Deere 4440 has a 16 speed semi-power shift transmission. 16 gears forward, and 6 gears in reverse. If properly maintained, that tractor will outlast your children. Take care of it, and it will continue to perform.
It’s not a powershift. It’s a quad range.
@@dougb27 Yes. The John Deere "Quad Range" transmission found in several of their tractors, including the 4440 is a semi-powershift or "partial" powershift transmission.
Four gears (1-4) in four ranges (A-D). Power shift between pairs 1-2 and 3-4 in each range, with synchronized shift between 2-3. Two reverses in ranges A-C. Tractor must be stopped, and clutch used, to shift ranges. Power shift is provided by a hydraulically-controlled planetary that provides an overdrive to each gear.
I don't mean to argue, as we are both right. But yeah, still a great tractor with a great transmission!
I think everyone here would love to see some TLC given to those tractors. Nothing crazy but some fresh paint, fluid changes, some new parts, and a good clean I bet these things would look young again.
Sod farmer here. Rolling grass is a very slow painstaking process. You want to go slow, really slow. The slower the better, but obviously if you went 2 mph you wouldnt get anything done. So 5 to 10 is the best but 10 mph is borderline too fast. Have fun! Wishing you a flat smooth grass runway!
Also moisture level just right , not rock hard and not wet , just enough that it will flatten out
@@moe85moe85yep if anything that's the most important part!
Slow and Smooth guys like they are saying. Gotta have the right moisture. I seen that roller bouncing and that's leaving dents you will feel with your plane. NEVER DRIVE across your runway. It's hard to get the dips back out once they are there. Tip of the day .. Don't fry bacon in your boxer shorts. LoVe the effort and motivation
10 would be flying!
What attachments have a speed rec over 5?
He said 4 minutes to do a full stripe, hes definitely flying! No pun intended
It’s crazy that I just spend 20 minutes watching 2 guys mow and roll grass. Cleet has the #1 channel on UA-cam. Such a variety and I love it!!
It did not feel like 20 minutes, good stuff
Weird hey
I know. I was suppose to go to work 20 minutes ago, but somehow I got wrangled into watching two guys play with tractors. Damn you Cleet and James!
It's raining in MD so I can't cut my own grass, might as well watch someone else mow theirs! lol
lolol thats exactly what I was thinking when the video was over, "cleet just tricked me into watching him mow the grass for 20 minutes" and I still enjoyed it
I have a soft spot for old deere tractors. In case you hadnt figured it out already they 4440 takes 2 batteries. Put 2 new ones on it and it will fire right up. Those things are solid and that is a nice bush hog. I bet you could pick up a multi gang reel mower like golf courses use to cut the runway when needed and it would look spectacular.
PLEASE as an old farmer from Idaho PLEASE PLEASE DO NOT EVER try to start while standing on the ground!!! Can't tell you how many people that have been run over while doing that. Just a little safety tip because I like you guys so much and care about your safety!!
They know what there doing u can to be on the ground lol
As someone who collects and restores antique tractors I would absolutely love to see those two tractors restored as original as possible. They are such amazing pieces of machine history, it would be sweet to watch them both continue to be used on the airport looking and running like brand new!
Also to note the 4440 was made from 1978-1982 and made roughly 112hp, and the 2440 was made from 1976-1982 and made roughly 50hp.
I had a 1948M JD and a 70s 1010 JD. Both gas. Used them here on my homestead for years. Got a diesel 4400 Ford loader and sold the old girls. Miss them.....
Hell it's even an open station 4440 without the soundgard cab
How much torque does the 4440 make to pull that massive concrete roller
I was just driving a 4440 yesterday. They are 130 PTO HP/112 drawbar hp. My experience driving them is that, like many other tractors, they have lots of low-end torque and probably ~500 ft-lbs peak torque. Low gearing, weight on the drive wheels, and grip let you pull lots of weight like that.
Cleet should probably driving in the B-range with that rig so he can get a reasonable amount of speed in B2 if he needs, but be able to start off in B1. No need to clutch between 1-2 or 3-4 makes it easy to keep going with that weight between shifts. He needs a second battery and new cables too. They originally came with a couple 6V batteries in series, one under the step on each side, and that gives you enough cranking amps to turn that big engine over properly.
Those old tractors would also probably feel a lot better/use less fuel revving at 1800 rpm instead of rated engine speed, but I guess that's not why any of us watch Cleet either lol.
I just watched you guys cut grass and compact dirt for 22 minutes and still enjoyed it. 🤣 The airport is sick. I can't wait until we see the house you guys build. You guys need to do a way over edited "Cribs" episode when it's done.
Get that seed off the top of the mower. It will hold moisture and make it rust oit faster. Also make sure to checkntje gearbox oil on the mower as well.
Its funny seeing cletus try and run the tractors you been running on the farm your whole life
Dude those 4440s are some of the most sought-after tractors of all time. Definitely worthy of some TLC. That's a great buy
So youve got 4 ranges A,B,Cand D and then park. Then R1-R2, 1-2, N, 3-4. R1 and R2 can be shifted between without clutching. Just move the leaver left and right. 1 and 2 can be shifted between without clutching and 3 and 4 can be shifted between without clutching. We never shifted ranges on the move so pick the one you need and go with it. But once in a range you can clutch and shift from the 1-2 to the 3-4 while on the run. The yellow lever on the left of the steering wheel is your pto. I grew up driving a 4055, 4440, 4640, and a 4750 those are some awesome tractors.
We need this comment pinned!!!
Well it seems as if you already figured it out, hence the video
This sounds like Ricky’s car in TPB
1st is reverse 2nd is 3
4640 baby here that beast was the go to for everything on the farm, then new case tractors couldn't even keep up
@@TheGrahamReaper21 Kinda, with that roller being 20k+ He's really a limit for that tractor. 3,400 ft. In 4 minutes is 9.5 mph. He really needs to be starting in B range to get that lower ratio starting off then shift up to 4th. He can do the same speed in C range in 3rd or 4th depending on RPM which isn't ideal.
Green & Yellow Tractors are the best! That bucket over the exhaust to keep the rain out is essential. We used to keep a coffee can in the toolbox on the old B Models and Super 60 we had... Whenever it was parked outside without us being there the coffee can was on...
To say is in so many times I see is greatness in the works. Untimely dedication to this. It's your being to always to go do something right?
Well young man you are in the realm. You have so many around you and truly you are in the wheelhouse of admiration and love. So many folks around you so dedicated in sharing their intelligence and being humble.
Former airport maintenance and "Aerodrome reporting officer / Works Safety officer".
There's a lot of detail in maintaining and owning an airport.
The FAA should have a manual that lists all of the requirements in design and maintenance.
You previously mentioned trimming the trees off the ends of the runway to get more usable length, but just as you have requirements for maximum allowed glide slope there are also requirements for obstacle heights off the sides of the runway.
We had a surveyor do his thing and he noticed a radio antenna was too tall and infringed on the runways airspace.
This was past a large grass area, past the large apron and at the back of the terminal building next to a large tree.
It was only JUST over height and we added it to the airport obstacle chart.
But that side slope was something i had to think about when we had major works happening.
Things like parking the excavator with its boom layed down low or parked further away from the runway.
I'd recommend replacing those old runway markers with proper cones. Then you can let the grass grow back around them and it will look so nice.
I'd also stock up on taxiway and unserviceable cones.
They will come in very handy when you are ready for a fly in.
A trick with the cones that you can't or dont want to peg into the ground, fill a sandbag to ¼ full, cut a hole in the top of the cone and thread the sandbag up through it. Tie a big knot so the sandbag sits just above the ground.
So easy to move about and works on sealed surfaces, of course the cones won't stack afterwards unless you remove the sandbag.
And the sandbag is still frangible so won't hurt the prop any more than the fibreglass cone will.
Definitely get some amber beacon lights for all the vehicles that work airside and PLEASE clean that grass off the mower.
Aside from holsing moisture, its a major fire risk. The bearings and gearboxs can heat up and ignite the grass. It'll take some effort now, but a battery air blower should make easy work of it if you do it right after every time you finish mowing.
Oh and maybe a longer term project, but look into subsoil and subsurface watering systems.
Basically leaky pipes that deliver water directly to the roots. A couple of burried moisture sensors could then control them so you always have the best looking grass.
I have never been so engrossed in reading such a lengthy comment that had nearly nothing to do with my life. Lol
That was super educational and fascinating even to me, who will never need that knowledge. Thanks for sharing! The community here is always so awesome. You're an awesome person for sharing!
@@goosenotmaverick1156I was the same. I saw it was a long comment and was going to skip but just got too into reading it lol
Some great bits of advice there, I hope they see this!
Keep the RPMs of the JD 2440 at 2100 when cutting the grass to keep the PTO at the required 540 RPMs. That is a must! Additional, stay off the clutch on both tractors, don't rest your foot on it and don't rev the engine that high to get the tractor to move; use a lower gear to get moving or the clutch will not last long otherwise. Check the gear oil in the gearbox on the bush hog too. A lot of those leak and need to be refilled all the time. That is all. :) Mahindra 1526 HST 4WD & Mahindra 6075 PST 4WD in NW Alabama. My 6075 will drag a fully-loaded dump truck around in the mud like a Tonka toy.
Always check oil in mower gearbox.
Yeah they think race cars have hard clutch jobs, wait until they gotta split that 4440 in half.
Judging from the pool of oil under that mower it needs to be checked regularly. These guys need a grease gun too for both of those tractors and implements. Check oil, check coolant, grease all the fittings, THEN go have fun!
Cleetus is an old man in a young man’s body. I respect the desire to keep long running traditions going with everything u do like the freedom factory, BE Airport, the cars etc. Have fun with the aiport cleetus, it deserved an owner who cares about its history and community
Garrett I gotta hand it to you man, you have built one HELL of an empire my friend and you deserve every last bit of success that comes your way.
Are building
@PatrickGunderson true that the hustle never stops
Hate it or love it, the underdogs on top.
Biggest business inspiration to watch everyday. Cleet is doing it in a VERY unselfish way. He takes care of his people/ (probably why no one ever leaves)
@KnifeFiend you got to take care of your crew that's literally the only way it should be done. Easily one of the reasons he's so succefull besides his work ethic.
The mower tractor you have was a well known 2440 series. 1976-1982 generation years. What makes this one so cool is the rear orchard fenders. These fenders now days are pretty rare to find. They are sheet metal fairings that allowed branches to deflect and slide off rather than catch. The 2440 is well known in the fruit and vineyard history. Love ya cleet
Hey thanks for the comment, was wondering what those fenders were for.
I love that he keeps the original people around!!!! They are so authentic and make the videos so much better!! The older gentleman probably has so much knowledge of how that place runs.
There should be counterweights that can be hung on the front bumper to keep the front wheels on the ground. You might find them laying around the shops/hangars somewhere...
18500 lbs roughly. I am a quality control manager for a cement plant and the is roughly 5.1 yards of cement. Cement is roughly 3600lbs a yard, so it's roughly 18500lbs. That depends on the mix but it would be a good estimate.
3600 yall doing them boys dirty son
I would expect there's some steel reinforcement in that thing, too. That would up the effective average density of the roller.
Quality control manager at a cement plant and your calling it cement... Come on man.
@@chrisjeremiah4601 u can google it a yard is 4000 not 3600, not ever
I’ll also agree to this your spot on the ball park figure I was gonna say 21000 lbs
JD 4440 is great tractor one of the best . Do not forget to clean all that grass off that mower and keep it clean and do not leave that grass piled on it, it will cause it to rust faster, and grease it before every use if fittings do not take grease clean unclog or replace . If you get all fittings working and give it a pump see it move everytime before starting you will not have to worry and bearings will work and last a long time! With them sitting awhile you would benifit from having them all serviced oil change , filters oil ,fuel and hydralics and checked out, then you will know they are ready to go and you can get them on maintance schedule. That will make them start and run better and last longer. Also blow out the air screen and filter after every use, change when needed. If you do not blow them out filters will not last long and will not run as good and could cause issues. If you do not have to do not use either, once addicted they will require it to start . So try not to use it, except when air gets in fueline, filter change or a leak!
I know I made allot of suggestions you probablly already know but you would be surprized how many people do not do it! If you want them to last forever maintance schedule and other suggestions will be a must!
you don't have to grease before every use - there should be a grease schedule in the manual for each fitting usually its like every 10 hours or so
You don't have to but grease is cheaper than bearings mate.@@littlepondfarm3488
I doubt those tractors will see any love in their future except if maybe one of the guys on the strip decides to do it themselves.. the money buddies got i doubt he’s worried at all about any maintenance or upkeep on those machines.. plus he’s got plenty of crap going on to keep the content goblins happy for a while so don’t think a video about overhauling old tractors is in the forecast.. so just pray the rust gods hold off on the things for the sake of tractor lovers who watch the channel..
Do not stand anywhere near those mowers when they are running. I have seen rocks being thrown out of them like cannonballs and broken blades are really nasty also.
this is the progression i was waiting for, i started following this channel and im not a car guy, but cleet made me enjoy cars, but doing tractor work, out in the open field now this is the real deal hahaha. love it. i'll defintely buy a cleetus & jackstand john deere inspired merch.
My cousin's also owned an old 4440 John Deere and I can vouch they are solid old tractors that thing has been running for years and it's still working hard.
Love when James is filming, great chemistry between him and Cleet. You can tell they’ve known each other for years.
Jackstand is such a key asset to the channel. Love the friendship and wisdom they have. Such a great group of guys and team which is what makes them so successful and running like a well oiled machine. Cleet totally hit the jackpot with being able to buy the airfield, it will provide so much exciting content while also being able to build his dream home. Surround yourself with the right people, make them feel appreciated, and be able to go to work with your best friends everyday while continuing to keep rising and killing it. So much excitement in the pipe, between the airfield, the Camaro build, Leroy body and Consuela!
I love seeing Jackstand in the videos 👍, every now and then he seems to take a back seat, but when he’s there he always brings the laughing gas, pun very much intended 😅
Yep! Jackstand will always give me a smile on my face when he appears. He is really passionate about racing also and knows so much. Whenever he shows his face on a boostedboiz video as well, you can just feel the enthousiasm for the 4 bangers
Man, Mike is such a legend. Seems like such a nice guy, would love to hear more about his time and adventures in aviation.
That old equipment is in the condition it is due to maintenance...or the lack thereof. The rollers bearings should be greased before or after each use. The steering linkage also, on both tractors. The driveshaft for the mower PTO too. Clean the loose debris off the top of the mower deck after each use. Be a darn shame to have it catch fire. Put some new battery cables on 'em and check the tire pressures. Finally, y'all might consider installing ABC type fire extinguishers within reach of the operators station. I agree with Jackstand, raise the mower deck, remove the blades (at least a pair, possibly three) and sharpen or replace as necessary. Doesn't hurt to have a spare set on hand. Probably wouldn't hurt to replace the diesels fuel filters and put some diesel fuel treatment in the fuel tanks. Diesel Kleen® works well to keep injectors clear.
Safe operations y'all, eye and ear protection.
Take care of those machines as well as y'all do the racing/flying machines and y'all will be in good shape.
Giddy up.
the cleetus2 channel should be filled with b-roll stuff like this. I'd watch the hell out of it and i'm probably not alone.
YES
Just keep it simple and keep everything on the main channel.
After Month of Freedom is over, the 2nd channel could become like Cleeter's version of VGG's "Vice Grip Lodge" channel. If he wanted it to.
Complete 2nd input stream like Colin furze
@@numlockkilla that's what I'm saying. Extra income, just for showing things that are gonna happen anyway. Pop a camera on the tractor, and do laps on the runway.
Who would have thought in the early days of this channel, you'd ever see Cleetus and Jackstand mowin and rollin their own airprot? Amazing.
i know.... i started watching right before leroy was supercharged, weve come a LONG way
its mind blowing.
Love to see a restoration on these tractors nothing crazy. Some paint would go a long way
Let's go, fully dialed, absolute unit...
4440s are amazing tractors. It would also help if you had both batteries in.
Love an old JD. But, as someone who mows with something similar. Please clear the grass off the deck when you’re done. That PTO gearbox gets HOT and can start a fire. Been there done that. On the flip side of that, when it rains and the clippings get wet they’ll hold moisture and cause the deck to rust out. So keep it clean and you don’t need to worry about either cause and affect.
My mowing experience is using a push mower for my yard, but seeing the pile of clippings on that mower deck was driving me nuts.
Well said...im overly OCD and pull my deck every run to fully clean with a pressure washer. Original JD deck from '03, and she literally looks new.
Is it my imagination, but does Jackstand have the voice of Randy Travis? Wonder if he can sing.
Pretty rich voice.
Seeing city boys try to drive an old tractor 🚜 i love it 😂😂😂 my paw had the 1985 4040 love driving that thing growing up.
Thank you for such a positive, encouraging, and uplifting video!
Am I the only one who wants to see the 4440 as a new project? That JD is an absolute Unit and deserves new life! My grandaddy had 2 back in TX and seeing her rumble to life in this video made me smile from ear to ear!
At least a quick respray and general service. It looks pretty decently maintained but it sure needs some lovin
They are worth putting some money in!
My neighbor got a 2240 that he bought from another neighbor I helped with farm work for 10 years. Was an absolute unit. Ran hard with little maintenance and rarely a issue. Still running strong.
No ur not the only one
We all want it
Without knowing the exact composition of the concrete, it's difficult to say exactly how much it weighs. Density can be anywhere from 1.2 tons per cubic meter to 2.9, with about 2.4 being probably the most common. Roller is 2m by 1.55m cylinder, so 3.64m cubed; therefore roller is minimum 4.4 tons (9700lbs), maximum 10.5 tons (23,000lbs), most likely around 8.7 tons (19,000lbs).
I reckon there's probably about 300 kilos (660lbs) of steel in there too, maybe more like 450kg (1000lbs). Difficult to guess without measurements but I reckon it's about 10m (33ft) of 10mm (3/8ths) I-beams, plus the tubes and stuff.
So around 20,000lbs total...ish
Cleeter and Squirrel restore the 4440? Would be hilarious to see a Project Prime wrap on that bad boy. Probably want some grass tires on her, so she don't tear up the runway as much as she flattens it.
I figure you are pretty close. Roughly 6x6x6, that’s around 8 yards of concrete, rounded off probably closer to 7 yards. Concrete weighs around 4k per yard dry, so 4x7= 28 thousand pounds, or 14 tons.
Aye, 6x6x6ft equates to 6m cubed, at 14 tons gives a density of 2.3 tons to a cubic meter, so same ballpark.
Based on the average of 150lbs per square foot.
Finding the volume of the cylinder comes to 136.99 cubic feet. Multiply that and you get the 20548.5 pounds. The weight of the steel probably puts it close to 22000 pounds.
@@knight838_ Yeah, I mean, it all comes down to guessing the density of the concrete, which can be quite a wide range.
I dunno about you but I reckon 22,000 is close enough to call it "about 20,000".
i love seeing this, guys figuring out old tractors and being excited about it
that 4440 will run forever
James standing right in front of the tires while cleetus is just pushing pedals and levers got my anxiety shooting through the roof
or when he reached in to try and start it standing in front of the tire with no one in the cab.
I think it is one of three things: James either has a lot of faith in his own reaction time, a lack of concern for his own well-being, or he figures that if something happens it will get a lot of views. Besides, if he gets smooshed Cleet will rebuild him with a big block and twin turbskies.
Same here.. If they are doing that to get comments blowing up, I'm falling for it. Too many people died in the same situations. Hope they tighten up on that.
@@turbo2ltr I have a CAse 580CK, pretty big girl too and that was the first piece of advise I got, do not start outside the cab in front of the tire.
@@michaelkennedy2528I started out with an International BD414 when I was about 12 - 13 years old, 50 something years ago and that was the one and only thing I was given as a hard and fast rule…. Everything else was just advice.
The eldest lad on the next door farm lost both legs doing exactly that about two years earlier, he’d survived but only just and plenty of good farmers have died that way over the years.
The other thing that freaked me out was when the mower got spun up with at least the camera guy obviously right beside it. As far as I’m concerned I don’t want anyone within 50 yards, minimum, when rotating machines are running. I’ve seen too many rocks heading for the boundary, to say nothing about blade pivot bolts going awol or old blades cracked at the pivot eye, either way it’s a fast exit for a blade at ankle level.
One last thing, it would pay them to get a grease gun on the PTO UJ’s pronto, again, they can get a bit too exciting when they let go and they’ve got no real idea of when they last saw lube. I give mine a pump about every 25 hrs and pull the shaft halves to lube the inner shaft about every 50 hrs.
Who else wants a live feed camera at The Bald Eagle Airfield for viewing pleasure 👌😎. Build a nice tower platform somewhere for viewing pleasure and maybe some R/C Plane flying 😝👏. Throw in an irrigation system and that place will be a dreamland 🥰
Maybe we can do some security in shifts as well 😄
Seeing these young guys get excited over using a tractor gives me hope.
My dad has a 4440 that my grandpa owned, 1969 and still running strong. My dad even waxes what paint is left, wish I could post a pic on here those tractors have some heart and guts in them.
JD 4440 is probably the best tractor ever built.
4020 changed it all
I’m a Farmall man but the 4440 and 4020 are probably the best.
@@earlperry9808no, 4320 was better than a 4020 in absolutely every way
@@cs-gj3yf how so
@@drewa3597 Upgraded Flux Capacitor...😶🧂
2 grown men, around cool stuff all day long. As soon as the tractors come out the smiles are next level. We’re all big kids 🤣
The old 4440 needs a Freedom Factory wrap or paint job. Really enjoy all of your ventures. Thanks much for all the fun vids!
An aviator's Paradise right there! Even has a Lake Amphibian. Mine was a 63 LA-4.
On that 2440, the "foot throttle" you found is the "goose button". You set your throttle with the main throttle control by the steering wheel, and use that if you need a short burst of more throttle to get yourself through some mud or up a hill or something like that.
Also, on both of them, the two pedals to the right are your brakes. They're independent for each wheel to help you get tighter turns. That thing that connects the two helps you brake uniformly with both wheels.
its a foot throttle, deeres fancy names mean nothing
@@cs-gj3yf goose button isn't the deere name either. It describes the function of the button. It's not meant to be used continually and it's near impossible to maintain a certain throttle level with it, especially on bumpy terrain.
@@martrg1 that's cause of deeres design for it, ford tractors are the same way, go order parts for one and you'll see its stated by deere to be a foot operated throttle
Btw to add to my previous comment, I think you and the guys at the shop should give that old girl a makeover. Bring her back to her former glory.
And that 2440 grove tractor is sweet too.
yes!
With the proper care those tractors will give many more years of service.
If you do a restoration, do it to factory specs. Good enough is perfection for that kind work vehicle. She's lasted this long and I'm guessing she'll last a good many more years.
@@benjaminshropshire2900No, we need twin compressors and nitro!
@@yt45204 that's exactly what *ISN'T* needed. (And if that was _supposed_ to be a joke, then your sense of humor needs an overhaul.)
❤ I think you have some good equipment for the airport.
The 4440 with regular maintenance will last your lifetime unless you're trying to pull wheelies all the time lol.
Cletus we know now you break yours and others stuff.
Probably will not last as long if you're driving..lol
Watching Garret and James hang out is good 👊🏻
Cleetus buying an old run down airfield with a bunch of old guys in it gives the same vibes as lighting McQueen in radiator springs
What you guys are doing for the couple of guys that are still using that airfield is absolutely amazing.
Love to see Mike getting involved in helping Cleeter McSkeeter get things up and running! Love seeing these old heads getting the respect they deserve. 🫡
I love this new stage of your life, I'm going through about the same thing on a smaller scale, putting in an offer for a property with a runway and hangar today!
So relaxing so much fun 👏🏼
Your guess of 10 tons was amazingly close. Take care of that 4440 do not forget to cover that exhaust. That's a real gem. Wish there was 12 months of freedom. Great video as usual keep em coming!
I come up with 21,000 pounds. That's concrete at 4,050 pounds per cubic yard and the beams are about 8 pounds per foot. Cleet pretty much nailed it.
I like to see how you've been so friendly with the older established guys at the airport you bought!
Yes. You can tell Cleetus was raised right, and was taught to respect others. We need A LOT more like him in this world.
If you love your old tractor your old tractor will love you👍🚜
The sidewalls on those tires will start coming off in chunks while the cleats will remain in tact. At least is how it happened to me with thirty plus year old dry rot tires that my grandfather put on new back in the '80's. Quality of old firestones showed that he got what he paid for all of the decades they plowed, as it was how he made his living farming. Now it's a mowing tractor, so I shopped around for the cheapest imports and two 15-38's with tubes ran me a grand several years ago.
The heritage of that airfield needs to be told.
I really hope you do a history oriented video series on everyone that worked on the creation of that field and the people who have worked there over the years, and continue to work there.
You can tell there is some seriously rich history in Bald Eagle Airfield - can't wait to see the Bald Eagle Nest when its finally done!
100% you should do a mini series on restoring the tractors. Those things are so cool. I really wish I was from the era where everything was about quality and not greed.
Cleetus is the man with a plan. 💪🏻Cars, check. Boats, check. Planes, check. Tractors, check.
Those old timers are definitely proud a young person that isn’t ruining the world.
Gonna be a blast the day I make it to see a Freedom Factory event 😎
9:02 the little lizard 😂😂
Not gonna lie I love you involving the old timers and treating them just like they are young men again.
100% , everyone gets to be a kid having fun in Cleetss videos !
No lie Im 39 and back when I was about 10 my grandpa sat me on a 4640 which is very similar to what you have there. I ran a do all over every inch of our farm in it and it never ever gave a f. Thanks for bringing back suppressed child labor filled memories!!
@9:06 the lizard running on the tractor lol
Would be so cool to see that beauty returned to its original glory!
I like all the dynamics, but something nice about a good ole Jackstand and Cleeter vid, just doing work like the early days
Wow. Those are some solid old tractors. Your so fortunate to have those for your airfield. Please dont modify or change them. Just do a bit of restoration and maintain them and use them. I enjoyed seeing the old tractors working more than the other toys.
Would enjoy seeing them restore that beast
I would love to see some episodes of you guys going through those tractors and doing regular maintenance items like fuel filters, oil and all other fluids changed, greasing, etc. Would make for fun content
The guys already on that property are so lucky Cleetus bought it. He'll respect them and their planes.
Don’t forget he also has a staff of workers down the road at the freedom factory, and a lawn care nut friend to help with the maintenance. So they’re probably really happy about having a professional crew on it.
Those tractors are minty, love 'em. The 4440 was made from 78 to 82 and they sold a bunch of them. They weigh about 12000 pounds, have about 110 hp at the drawbar and use 4-5 gallons an hour when working. That era was still peak John Deere before all the recent silliness of trying to stop people from owning their stuff. My dad's farm never had stuff that big or that new, but I personally loved anything with green paint. :)
I never thought watching tractors for 24 minutes could be so entertaining. I’m loving the month of freedom. Keep it up boys
I think garret (cleeter mcskeeter) will go into history as the great humanitarian, not only does he revive old racetracks, cars, tractors, airports but he prolongs the lives of just about everyone he knows. Sam is the testament to that as #1 but mike is going to be #2 in that line.
We also work 8 to ? hours a day but in our off time we watch other people work, what a fascinating time to be alive!!!
Garret keep being you brother you are the king of man!!!
i dont think a more perfect channel exists for me. we started with cars, then we had planes and helicopters, now were running damn tractors! what a ride
Don't forget the boats...Cleet is a winner in Sprint Boat racing as well.
@burgessschnitzius4987 and boats! Even better that is he was racing a boat built in New zealand by a company in my home town 🤙🏼
and hovercraft
Cleetus is really only into tractors. He's been running a long con to sucker us in.
Mike is awesome! We need more of him.
Lets go! A airport???? Crazy! I LOVE IT!!! 1:29
You two guys were like little boys when you got the Deeres running……. Never seen you or Jackstand have so much fun and you two were all smiles….. that will be a treasured video in my book……😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
I vote for a rebuild series on the ole 4440!
9:05 the lizard lol
I hope those old puppies will get a fresh repaint and some love for the Engine and lights!
Love to see the work getting put in!