You are helping me so much. Thank you for these 3D modeling videos. I had been using extrude and subtract for everything. Press pull makes things a lot easier. Now if I could learn how to make threaded fasteners in 3D I’ll be set. Oh and extrude path and so many others.
hI, thank you for the video. I have a question though, when i was trying to do the arch, then trim the unneeded lines, I kept getting an error, that "edge is perpendicular to the UCS XY plane". I tried setting projmode to 0 as someone said but that didn't help. Any idea?
Hi sir could you please let me how I can change from 2d ton3d in CAD2022 Because I am not able to find it in the same way you explained in your video, please 🙏
For the last traingular part why you used the loft method?? Can we make a traingle and presspull it and then move it to the desired circle and then presspull the gaps??
Hello, My doubt is on exactly on 7.13 , When u r clicking on the right for you its just changing only on the grid but for me ( I'm using MAC autocad 2024) i dont have that tab in my autocad when i'm clicking on the right the whole perspective changes, What to do in that case?
fantastic video thanks! but one question, I'm new to 3d drawing, correct me if I am wrong, but using AutoCAD mechancical seems far too complicated compared to Inventor or solid works? it is more like "ok you can do 3d drawings in Acad as well, but not really ment to used for". it is so much more work, also have seen one of your Inventor videos, way more handy program. greetings from Austria
AutoCAD is a direct modeler as opposed to the parametric ones that you mentioned. Direct modeling is actually much faster once you learn how to use the software.
SolidWorks Sheet Metal Full Tutorial: ua-cam.com/play/PLrOFa8sDv6jeG5LUxdVHfimxBTj9Qe-yx.html CATIA V5 Sheet Metal Design Tutorial for Beginners: ua-cam.com/play/PLrOFa8sDv6jfkZNdyDFnxB6shyNsNEhzZ.html
So technically instead of the rib section you did sir, i tried drawing a triangle of length 20 and height 40, then presspulled to a depth of 10. i think this works and even less complicated right?
Hi, Thank you for the video. I have been learning a lot. I have a question - after surfsculpt. The triangle becomes a line instead of a solid. Can you assist?
@@onlyhumanity6148 from the autocad manual: "This is a part of modeling command of this software which is a combination of extruding and subtract command of AutoCad software. By PressPull command you can extrude any section of any model in a particular direction or you can subtract any section of that model in a particular direction by using some simple steps".
Hello sir at 16:12, i used the trim option and it is not getting trimmed. It is showing ( the edge is perpendicular to the ucs xy plane ) What to do sir?
@@CADCAMTutorials it is still not fixed the problem. I have followed all setup and my views (USC and Restore view) are similar to you. Please help thank you.
Can we ask you to review a piece? Or send you a piece we are having difficulties with and you can help us? For example, right now, I'm struggling with Solid Professor Angled Joint.
I put the view on Front and named UCS to Front. I typed TR and hit enter to select Trim tool. Then I selected cutting edges, then I selected every line 'The circle and bottom rectangle portion' and hit enter. Then at that point I entered in a mode to trim that object. I selected the items listed in video. Then hit escape to get out of Trim. Hope that helps, I think the enter enter short cut listed in video does not enter correct mode.
ADD BLOCK THIS CHANEL WE WELL LEARNING BECAUSE ALL CHANEL PROBLUMS ADD JIS KI WAJAH SE AP BILKUL LEARN NIHI KR SAKTAY KUCH B ADD K I WAJAH SE AGNORE ALL CHANELS S
You have indeed made Auto Cad very simple for us. Excellent.
Thank you 😊
Sir Your explanation is awaysome, really nice , everything is very clear, THANKS a lot sir
uno de los mejores tutoriales que he encontrado en la web. gracias
THANKS FOR YOUR CLASS. YOU ARE A GOOD MAN
You are helping me so much. Thank you for these 3D modeling videos. I had been using extrude and subtract for everything. Press pull makes things a lot easier. Now if I could learn how to make threaded fasteners in 3D I’ll be set. Oh and extrude path and so many others.
Agree with you... A lot.
Thank you for sharing your knowledge free of charge
You're welcome 😊
I am learning so much from you. Thank
Thanks so much. It is one of the best tutorial .
You're very welcome!
Your explain is very clear.easy to understand...
Thank you 😊❤️
I am very happy your teaching sir.
That's very good, I am happy to listen that.
Good job, pl keep it up, it’s help people a lot
Thanks for your tutorial sir. Really appreciate it
You are welcome
I am watching your 109th video❤❤❤❤
Thank you for this tutorial!
You are so welcome!
Thank you very much for your patience, time, efforts and every thing. this was very helpful. much appreciated .
You're welcome 😊.
how to download cad cam software and where plz guide.
8:24 at this point I can't trim, only cutting ✂️ edge is selected then I was trim to down half circle ⭕ can't trim, what I do ?
Error is cannot trim this object
Concise, comprehensive, excellent!
Very educative. Keep doing what you do.
Sure
thank you very much, this tutorial is very useful for me 😘
You're welcome 😊
You understand very well.thank you very much
You're welcome 😊
Sir I am facing problem of 1 found 1 removed and couldn't locate the edges what should I do??
please how do get the quadrant circle i mean 20 of 40
thank you very much sir❤️😊
Awesome sir...pls upload more videos on 3d models....pls sir pls.....❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤✌
Here are more videos:
AutoCAD 3D Tutorial for Beginners: ua-cam.com/play/PLrOFa8sDv6jcfsE__xMC2Igl3Y3DXhs8g.html
SIR SECOND DRAWING OBJECT MERGING LENGTH 6 AND 8 HOW TO FIND. COULD YOU EXPLAIN SIR?
Good teaching
Thank you 😊
at16:13 I can not trim them and each time I touch the line it shows prohibit icon.. why?
😍❤ super explanation sir
Thank you 😊
Ты просто лучший
Thank you so much sir!
hI, thank you for the video. I have a question though, when i was trying to do the arch, then trim the unneeded lines, I kept getting an error, that "edge is perpendicular to the UCS XY plane". I tried setting projmode to 0 as someone said but that didn't help. Any idea?
Please select correct UCS.
Sir, thanks a lot for your videos. I've learnt a lot from the.
You're welcome 😊
Hi sir could you please let me how I can change from 2d ton3d in CAD2022 Because I am not able to find it in the same way you explained in your video, please 🙏
ua-cam.com/video/ewhcG-tUNzk/v-deo.html
Thanks guru ji really
You're welcome 😊
What software do you use to record your screen?
hello sir, should the radius of the circle used while making rib always be double of the radius of circle with which it is to be attached ?
For the last traingular part why you used the loft method?? Can we make a traingle and presspull it and then move it to the desired circle and then presspull the gaps??
This rib is more accurate.
@@CADCAMTutorials thanks for your reply sir.
Thanks a lot sir ❤️❤️
You're welcome 😊
Hello. I’m interested in your course. Can you give 101 training?
VERY NICE
Thank you 😊. Please subscribe to get new video notificatio.
trim does not intersect in presspull command how can i fix this issue?
I like you teaching. I just started watching your videos a few weeks back and learned a lot. Do you offer private drawing services?
No
@@CADCAMTutorials If i needed additional help on a project I'm working on would you be able to help?
It will depend on type of help. If possible, I would certainly like to help.
Tq for your very2 nice explanation sir..
At 16:38 not able to select the inner circle for combined press pull ? pls help
which version you are using of autocad.
any version can be used after 2017
How can I pick the mid point of a circle anywhere
Nice! Very helpful!
Best vedio
Thank you 😊
இதுபோல் தெளிவாக யாரும்
சொல்லி தரவில்லை
உங்களால் தமிழன் சாதிக்க முடியும்
good tutorial thanks
Thanks
You're welcome 😊
Hello,
My doubt is on exactly on 7.13 , When u r clicking on the right for you its just changing only on the grid but for me ( I'm using MAC autocad 2024) i dont have that tab in my autocad when i'm clicking on the right the whole perspective changes, What to do in that case?
You may be clicking on right view in place of that you have to click on right UCS.
Thanks for your guidance
keep it up
fantastic video thanks! but one question, I'm new to 3d drawing, correct me if I am wrong, but using AutoCAD mechancical seems far too complicated compared to Inventor or solid works? it is more like "ok you can do 3d drawings in Acad as well, but not really ment to used for". it is so much more work, also have seen one of your Inventor videos, way more handy program. greetings from Austria
AutoCAD is a direct modeler as opposed to the parametric ones that you mentioned. Direct modeling is actually much faster once you learn how to use the software.
13:26 my colour option can't shown,what I do?
Sir koi programming. Ka chanel btao plzz..
Powermill 8.0 programmings..
Delcam PowerMILL Training Tutorial: ua-cam.com/play/PL77C28107EB6C09A0.html
super bro
Thank you 😊
Sir I want doubt about triangle is not making 3d please help
Check your UCS is correct.
@@CADCAMTutorials thank u
try 2x speed, just works :D
Sir
We can not see ful scree because the subtitles is in front of the screen.
Please consider and give your good guidance to us.
Thanks
I'm a plasma operator. I want to learn sheet metal cut and fold. My request make the sheet metal cut and fold CAD video
SolidWorks Sheet Metal Full Tutorial: ua-cam.com/play/PLrOFa8sDv6jeG5LUxdVHfimxBTj9Qe-yx.html
CATIA V5 Sheet Metal Design Tutorial for Beginners: ua-cam.com/play/PLrOFa8sDv6jfkZNdyDFnxB6shyNsNEhzZ.html
Thanks for easy tutorial 👌
You're welcome 😊.
So technically instead of the rib section you did sir, i tried drawing a triangle of length 20 and height 40, then presspulled to a depth of 10. i think this works and even less complicated right?
I am thinking the same.
What is the name of drawing
Which laptop best for AutoCAD?? To learn
i5 4gernation
how can i download the program?
thank you
You're welcome 😊
How to give dimensions?
ua-cam.com/video/gspeXBczdDA/v-deo.html
Sir I have doubt
Hi, Thank you for the video. I have been learning a lot. I have a question - after surfsculpt. The triangle becomes a line instead of a solid. Can you assist?
I have the same problem did you already know how it can be done?
i have same problem bro . can anyone assist ?
Autocad does not allow me to move the circle when I enter the 20 value
Hello sir, please tell me what's the difference between extrude and presspull
Presspull is a combination of extrude and subtract command.
@@petrusbenckey how is that?? I dont get it.
@@onlyhumanity6148 What?
@@petrusbenckey how is presspull=extrude+subtract
@@onlyhumanity6148 from the autocad manual:
"This is a part of modeling command of this software which is a combination of extruding and subtract command of AutoCad software. By PressPull command you can extrude any section of any model in a particular direction or you can subtract any section of that model in a particular direction by using some simple steps".
Sir mera trim command work nahi kar raha
Nice
sir want to install auto cad
Do I need a dedicated GPU for projects greater than this?
You don't need a very powerful gpu.
Hello sir at 16:12, i used the trim option and it is not getting trimmed. It is showing ( the edge is perpendicular to the ucs xy plane ) What to do sir?
May be object was created in different plane and you are trimming in different plane. Change the UCS to align xy plane with the shape.
After selecting trim>>click cuTting edges down on the command bar and follow the video from there
super sir keep it up
Why i cant specify basepoint sirr help 😢
When i m triming the circle it is writing edge is perpendicular to ucs x y plane what to do
Check your ucs, 2d shape needs to be created in xy plane, and not on z axis.
@@CADCAMTutorials it is still not fixed the problem. I have followed all setup and my views (USC and Restore view) are similar to you. Please help thank you.
@@CADCAMTutorials What to do if this doesnt work
how to track the quadrant at 22.21
Make object snap tracking ON and ensure that quadrant object snap have tick before it.
@@CADCAMTutorials THANK YOU SIR
how did you know the length is 80 3:25
40+40
It won’t track my Z axis 22:23
why don't we put limits in 3D modelling ?
If you select correct template, then there is no need to put limits, even in 2D also.
Surfsculpt is not properly work why?
Yeah I have problem with surfsculpt too Autocad 2020 I'm jusing
Hello sir pls reply my comment how cut side edge
Which side edge?
@@CADCAMTutorials upper side corner edge
@@CADCAMTutorials sir i m a mold designer which software best for me autocad or inventor ?
Inventor
Can pls show dimensioning for sec drawing
Sir English letter typing not showing the diagram.
Click on CC, it will stop showing
Me kya karu
Related autocad drawing
Can we ask you to review a piece? Or send you a piece we are having difficulties with and you can help us? For example, right now, I'm struggling with Solid Professor Angled Joint.
I CAN'T TRIM THE STUPID CIRCLE on 1st EXAMPLE ... HOW ??
Check that UCS is correct.
@@CADCAMTutorials yah i just check trim mode not in ucs .. can you explain what ucs for ?
Here all the 3D basic concepts are explained: ua-cam.com/video/Vm_fQom-Rm8/v-deo.html
I put the view on Front and named UCS to Front. I typed TR and hit enter to select Trim tool. Then I selected cutting edges, then I selected every line 'The circle and bottom rectangle portion' and hit enter. Then at that point I entered in a mode to trim that object. I selected the items listed in video. Then hit escape to get out of Trim. Hope that helps, I think the enter enter short cut listed in video does not enter correct mode.
That's right, in AutoCAD 2021 trim command has changed.
I hope drawing more hard ship
Marathi 😁
ADD BLOCK THIS CHANEL WE WELL LEARNING BECAUSE ALL CHANEL PROBLUMS ADD JIS KI WAJAH SE AP BILKUL LEARN NIHI KR SAKTAY KUCH B ADD K I WAJAH SE AGNORE ALL CHANELS S
Thanks for your tutorial sir. Really appreciate it
So nice of you
Thanks you
Welcome 😊