✨ LG ELECTRIC DRYER DOESN’T HEAT - NO NEED FOR PARTS- DIY AND SAVE $$$ ✨
Вставка
- Опубліковано 5 гру 2018
- LG ELECTRIC DRYER DOESN’T HEAT-NO PARTS NEEDED-DIY AND SAVE $$$
Easy way to reset your Hi-Limit to GEt your Dryer heating again.
Click Here to Order a New LG Electric Dryer: amzn.to/3SXJ2Sg
IF MY ADVICE HAS HELPED YOU...
PLEASE CLICK HERE TO DONATE
www.paypal.com/cgi-bin/webscr...
PLEASE HELP TO KEEP THIS SERVICE GOING
THANKS SO MUCH😀
Check Out Scott’s over 600 Appliance Repair Videos:
/ scottthefixitguy
PRODUCED BY SCOTT THE FIX IT GUY WITH OVER 28 YEARS OF REPAIR EXPERIENCE
IF MY ADVICE HAS HELPED YOU...
PLEASE CLICK HERE TO DONATE
www.paypal.com/cgi-bin/webscr...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
PLEASE HELP TO KEEP THIS SERVICE GOING
THANKS SO MUCH😀
Check Out Scott’s over 600 Appliance Repair Videos:
/ scottthefi. .
Please CLICK Here To SUBSCRIBE: / @quickandeasy5minuteap...
*** PLEASE EMAIL ME WITH ANY QUESTIONS TO : ScottTheFixItGuy@yahoo.com"
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
▶️-Subscribe Here: / @quickandeasy5minuteap...
🛠-Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @quickandeasy5minuteap...
💻-Website: www.ScottTheFixItGuy.com
📖-Like us on Facebook: / scottthefixitguy
🐥 -Follow us on Twitter: / scottthefixitgy
🌎-Instagram: / scottthefixitguy
-👀See our UA-cam Channel: / quickandeasy5minuteapp...
🙏-If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com/cgi-bin/webscr...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
🔌-GREAT PLACE TO ORDER O.E.M. Genuine Parts for Your Appliance - Click Here: fix.pxf.io/MmrxYY"
Need Extra Help with Your Appliance Today - Click Here:asqme.com/@scottthefixitgu
⚙️-Good Place to Buy Parts: bit.ly/3wD4L5W
🧰-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
- You Can Fix Your Appliance Yourself and Save $$
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊 I’d Like To Thank All The Awesome Viewers That Have Supported This Channel By Subscribing or Joining as a Channel Member.
Thank You for Your Very Meaningful Support😊🙏 🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Quick and Easy - 5 Minute Appliance Fixes Do you need More Appliance Repair Direct Help from Me? Visit me at: AsqMe.com@ScottTheFixItGu - Навчання та стиль
You sir are a lifesaver! Saved my mom some money and replaced the heating element myself because of your video. Thank you!
I watched the whole video twice and didn't see where it was suggested to tap on the high limit but since people had mentioned it in the comments I figured I'd give it a try and it worked. This is a great detailed video. Thanks for saving me a good bit of money.
there is clearly a part of the video missing around 7:09 - it jumps from him taking it out to him talking about something else. Must have been there.
Awesome video with great instructions! I disconnected the wires for control panel & took that off. Made moving the "bulkhead" easier.
I wacked the fuse - thinking you were crazy, but wow - it worked! Going to buy a replacement fuse anyway as a backup, but it'll work for now. Thanks!
😂😂😂😂Great job
I Had to pause when he corrected himself calling the bulkhead the manifold to comment & salute him 😂😂😂 I said the Bulkhead to myself and kinda thought if I should watch anymore, but that cleanup kept me tuned in bro! Good video, very helpful.
In a house full of boys the washer dryer never stop so any break in service is a problem. Super helpful video, tested thermostat and no continuity. Took it out from the back, gave it a wack and presto continuity and dryer working great now. Thanks again.
Very impressed😊😊
Thank you so much for this detailed video... So easy...followed your steps, no continuity on thermostat no matter on the banging of it.
$5.69 for the part on Amazon with two days shipping put it in and working great all for $5.69 !!! You saved me much money on a service call !!!
Excellent ,
Thanks so much😊
from the beginning the dryer was not heating after watching your video i did the same test on to dent the hi-limit so i then pick up a new one replace it now im getting a tE ,
Just tried it and it worked. thank you very much...Awesome and simple fix!
You’re welcome 😊
Extremely detailed information truly gifted technician thank you sir.
Thanks so much Al😊
Thank you for the video!! I have the same dryer with the same issue. Although tapping it did not work for me but it did point me in the right direction. Part ordered, will update tomorrow after install.
Update...works great! Thanks again for the video.
OP
This was very helpful. I replaced the belt and rollers..👍 metal edge is sharp. Use glove when taking it apart.
Great idea👍
need to work on dryer to replace roller and this is exactly what I was looking for.. thanks.
You’re very welcome😊
Thank you i was able to fix my dryer bcs of this video
Thanks for the follow up👍
Thank you so much. Awesome video. You help me fix my LG dryer. (wasn't five minutes though =)
Nice job John😊
Great video. Saved me a lot of money. Thx.
I’m so glad it helped👍
Thanks. It was what I needed to see.
Thanks so much
Thank you so much for your input. My LG machine suddenly stopped drying. I checked the filter and saw a bunch of lint buildup-the probable cause. I ordered a few sensors on Amazon, got them delivered next day. Opened up the dryer, ran a continuity test and got no signal on the high limit sensor. Reset the sensor by pressing its button, and got a signal when I ran the continuity test again. Cleaned up the dryer real good, put it back together and was able to get it to dry again. Will probably keep the sensors in case anything fails. Your help was enormous-thanks!
Very impressive Rico👍👍👍
I didn’t see anything about a reset button on the sensor. Is that what are talking about?
@@truthteller50 yes. The sensor has a small button. Press it to reset.
@@infosec_007 which sensor has a small button??
He shows you starting 6:08
Bother, you just saved me a wad of cash. You rule like Caesar. Thanks so much!
Thanks David,
I really appreciate that
Some of these critters have what is called a thermister. It sits by the blower next to the thermofuse. It is literally a probe looking thing. the continuity on that thing should be around 11K at room termparature. If that critter's range is either open or closed, you have to replace it or you won't have any heat.
Excellent, thank you👍
Use a muffin tin to keep track of the screws
Yellow and blue on the heating element gives me 40 ohm's is that good?
be aware if the hi limit tripped, it usually means the thermostat has failed. the thermostat cuts the power at a lower temperature than the Hi limit.
He tested the thermostat
Did you cange the thermofuse?
What fuse should I get? Do u have an Amazon link?
I have now power at all going to the control panel
QUESTION: at the 6:10 mark in this video you run continuity tests. My hi-limit and thermostat check out. However, your first check (between yellow and blue leads on the heating element) differs from my result. You get continuity, I get a crackling sound out of my multimeter and a reading around 40 Ohms. Yellow to Red and Blue to Red give me the satisfying beep. I am thinking I need to replace my entire heating element. Any advice you can offer is appreciated.
That sounds right. Time for a new element .
There are 2 4" plastic hand holes on either side and you can also pull out the exhaust tube to get access and don't have to take the whole thing apart.
That’s a great way to get in there, especially on the right side.
What does it mean exactly that there are hand holes? What good does that do you?
@@truthteller50 There are cut-outs on the sides along the bottom covred wtih plastic covers. You can pop those off and get your hands in there so you don;t have to take apart the entire maching to change a $5 part.
@@TexasEdition thanks, I’ve already gone through the entire tear down and rebuild. My model must be slightly different because it didn’t have those holes. Unfortunately a couple weeks after the fix it started squealing. Has to be belt or one of the wheels, but don’t understand how that could jack up after two weeks of use. Ugh.
My steam is not hooked up since I moved into my new place and now it's having problems. It won't start unless I unplug it and plug it back in. Is it doing this because the steam isn't hooked up? I paid a repairman over a hundred bucks to look at it. He didn't even take it apart to check any thing and did know what was wrong. The he called me the next day to tell me it would be $750 to repair it. Can You help me.
100% 👍
Thank you for the tip. Saved me from buying a new one. Bless you for taking the time to help others.👍
Great information. Thanks tap it! Folks
You’re welcome😊
I keep having my fuse blow. It has a reset button on it. I don’t know what’s causing the fuse to blow nearly every load. There is no obstruction anywhere.
The insides a very similar to my Samsung, that keeps popping its high limit fuse, despite thorough clearing.
Usually a very clogged dryer vent tube.
@@QuickAndEasy5MinuteAppliance It blew fuses even when it vented in to an open basement. I put it down to poor design, I'd cleaned and replaced a lot of parts in that machine even the control board. It's now been replaced by an LG with flow sense.
Ok, got the high limit switch out (by only taking the side access port off), and it has no continuity. I gave it a couple good whacks, and all that did was dent the top of the circle - still no continuity. Any idea where to find a replacement?
Sure just put your model number in with the word hi-limit
Are you sure you dont want to fly out to seattle and give me a hand. Lol. You make it look so easy but im afraid i wont get it back together.
Thanks Brandy,
If you can send a ticket, I’ll do it. I think you’ll be fine though😊
Thanks Brandy, you’ll be fine😊
I feel after watching this video there is not a dryer in the world that I cannot fix
Thanks Christine,
That’s what I like to hear😊
Any idea why mine keeps needing to be reset? Works a few weeks, then I'm resetting again. Thoughts?
Good question,
The vent tube is obstructed some where.
I need to do this to take all the money I hear rolling around OUT!! Thanks!
You’ll be rich😂😂😂
Can i still check continuity if power is cut
You bet👍😊
Haha I have that same exact watch and the same exact dryer.
Very cool😎😎😎
My dryer LG DLEX3470V will not generate steam on both of the steam settings. Any idea what and how I should check it.
The sweetie pies say they want to sleep at our house if it’s OK
Wrong text sorry😂
You seems to be doing all these while connected to power . Is it safe ?
Much better to cut power first👍
I have an lg tromm and replaced the heating element with the fuse and thermostat and it still doesn't heat, dryer seems to be stuck on "cooling", had it apart twice now hmmmm
There’s also a little fuse and a thermistor behind the fan blower housing that maybe needs to be replaced.
Ok, I'll have it apart and have a other look at it
@@QuickAndEasy5MinuteAppliance I just replaced the heating element with the fuse in a model dlex3370w and it's still not heating as well. How would I order those parts for this?
So what happens when both are good. Put new heating element in and still won't heat up.
How about the 2 breakers for the dryer.
Are they both on?
@QuickAndEasy5MinuteAppliance yes both are on. Checked continuity on everything. And all checked out good.
How u doing all this work without taking that expensive watch off🤔
Rolex, is such an awesome tough watch.
@@QuickAndEasy5MinuteAppliance it is but not worth taking the risk with scratches ,anyway looks great on you 👍
Thanks so much👍😎
Completely disassembling my dryer and trying to put it back together doesn't seem "quick and easy" - and no explanation about "testing continuity"
And then 8 mins in.. oh you can just stick your hands in these two holes instead of taking the whole thing apart.
That’s the quick and easy part😊
Best to disassemble it anyways to clean it out. Pretty sure that’s the cause of the part failing in the first place. Thanks for the video!
you took off high limit then wut?
Then you can bang it down hard on concrete to reset . I replaced in this video👍
@@QuickAndEasy5MinuteAppliance it worked 💀 thanks
@@QuickAndEasy5MinuteAppliance fr fr i read comments tapped it with hammer and it works now thanks