Rear CV axle Boot replacement install Nissan Skyline GTR R32 R33 R34
Вставка
- Опубліковано 10 вер 2024
- Replacing your cv boots is a normal things when owing a more than 25 year old Nissan Skyline R32 R33 R34 GTR. Thanks to Nissan's Nismo Heritage program you can buy oem cv boots kits. These kits come with all the original parts, clips and grease required to fully rebuild/refresh your Nissan Skyline cv axles. While I had the axles out of the car I went ahead and replace the rear differential seals with new oem units. My car is one step closer to being a good reliable car ready to be driven hard. For all you Skyline GTR lovers, lets get are hands dirty and get this job done.
All parts listed in links below you will need to complete this job!
Rear CV Boot below. Need 2 of each to complete job properly!
rover.ebay.com...
rover.ebay.com...
My Gear
Main Camera Sony amzn.to/363tNiP
Backup Camera Pixel 3A amzn.to/3bBQXhm
Tripod amzn.to/2LnXHFd
Camera handle grip amzn.to/35XXVMx
In car camera mount amzn.to/2Lyd7GQ
#nissanskyline #cvboots #nissangtr #cvaxle #carchannel #jdmlife #jdmcars #righthanddrive #drivetrain #diycarprojects
There is nothing better when a man knows how to use his hands. Nice video, I love your car!!!!
Absolute life saver this video! Thanks so much for posting, rebuilding my stagea at the moment and this was very helpful ❤
You're so welcome! Glad to hear the video helped you out. Happy Holidays!
Great video man my rear diff seals are leaking a bit prob tackle this job with the help of your video in a month or so. Was thinking about paying a shop to do it but after watching this I think I can handle it. Keep up the great content!
Nice to hear this video helped you out. Heck yeah do it yourself and save some money!
Nice attention to detail, I was getting ready to replace the boots on my rear shafts. I will make sure not to drop those bearings. Helpful as always, thanks.
Is changing the differential side seal 100% necessary when replacing axle boots or only if it’s leaking? Thanks
Use your finger and press on the inner seal where it touches the axle. If it is flexible and moves when you touch it, you can keep it. If it does not flex and is hard to the touch, replace it. Good luck!
@@JDMRightHandDrive thanks a lot man, will be doing that this weekend
Hi I hope you will reply I juts got a 4 door r32 and the right rear knocks when I turn would it be the same process?
Should be very similar. If you are getting a knocking sounds Some of the components in that system could be worn out and damaged. You wont find out until you take it apart
Isn there a c clip on the diff stub?
Nope, they just pop out.
Nice video man
You got a beautiful car
I want to change the seal inside the diff but I forgot to mark as you did
Can you please tell me on how to align the axel to the hub ?
Thanks Dave! If you didn't mark it you should still be ok. Imagine if you replace the cv axle with new ones or when the factory put the original ones in. They are not balanced at all, like the center drive shaft is. You should be able to put it in with what ever orientation you choose. I marked one side, but I didn't mark the other side. Both sides went back together fine and car drives's perfect! If you don't have a copy of the factory service manual. I would recommend that as a good place to start on any project on this car. It goes over everything with amazing detail. Here is a link for the PDF service manual. www.skyline.se/dokument/R32_gtr_service_manual.pdf