I just recently got a V8 Pixel lightsaber. The switching between ignition modes AND/OR lighting modes are more of a, "press-hold-release" it's less than 2 seconds. It more of a one second hold. The instruction say long hold, but doesn't verify how long that hold is. Play around with it, you'll get it. Your saber is NOT broken!
question. When i have chosen a color, ignition effect and sound effect, will it stay on those settings until I change it again? As you have the saber...could you test it?
Did y'all figure out if there was a way to change the retraction animation or is it just random? The random retractions really take away from this blade for me tbh, I might sell it
Is one of them being able to choose how the saber powers down? Because that's a deal breaker for me. I don't want a saber that ignites from the middle or top and I definitely don't want it to power down in those torpid ways. It makes no sense. There aren't light sabers in Star Wars that power down at the top.
@@lotionwilkie3188 Yeah. As long as I have the option to make it that way, it's fine. If it's a built in thing that can't be changed, I don't want anything to do with it. But I was told it has since been updated so that it no longer does the random power off.
Greetings and thank you very much for your review, the V8 is a really great lightsaber! - That being said I've had some issues with my saber: 1. I want to control the retraction; random doesn't do for me. 2. The very first milliseconds of the ignition sound get cut off when the saber hasn't been used for about 10 seconds. Try it with the Luke setting for example, there is something missing every now and then. This was the real dealbreaker for me, so I sold my V8. 3. Since the buttons pop out from the hilt, I happen to activate/deactivate things without intention. 4. And finally I would have wished for different Blaster- and Clash-sounds; they are always the same per patch.
I have read alot about Sabneo on Reddit and other platforms. And some people say they are LGT resellers and some say they are awesome, I believe they are awesome just like in this video
Oh my god! You had me in tears when I watched this earlier this week, but I didn't have time to comment it on it. That was really funny and actually really well done. So kudos to you for injecting that bit of rap humor into your reviews.
What should I charge it with? Is an iPhone charger good? And also one of the micro led doesn’t work and idk if it’s worth the time for them and me to get a new blade
Hay Frugal Jedi, lets start with a happy new year, I was messaging you the other day about this Saber and on the 22nd I went and ordered it, im going to have a go with the buttons and sort them out but for the price and looks of the black one I had to get it, my delivery time is the 3rd to the 9th of jan, keep up the great work with your videos they are great to watch. Jon
So you can't set the turn off mode? I think they should turn off from the end to the hilt but you can't set that? Also can you add startup sounds and visual effects from online? I saw that you can on some.
Xenopixel or YDDSaber pixel allow you to add more soundfonts and customize the saber. I've done a few reviews on different Xenopixel and the Revan from YDD. Soon, I'll be reviewing SN PIXEL V4 which also allows you to add more to it
I have mine stuck in the Goust mold & having trouble changing out of that mode.. I know how to change through the different modes with the bottom button.. But having trouble getting to the different ignition light up modes..
Did you switch to a longer blade to get tip drag to work? It comes with a 32" blade doesnt it and tip drag light doesnt work as its coded for 36" blades?
dude you did it :D thanks to your video I understand the controls of my V8, thank you very much. Btw, you need to tell me where you got your Jedi Robe, looks awesome
@@Blockybeanboi I realize taking the battery out is a bit of work. You have to unscrew the buttons and remove them, remove the screw on the back then slide the core out
@@thefrugaljedi oh darn I ordered the silver one never mind I kinda like the super shiny silver one too .. I’m sure it will be just as nice as your grey one .. I asked Sabneo which one yours was from screenshot they said silver .. never mind
@@thefrugaljedi could you send me closer up pic on messenger of the colour accents on the saber you were taking about if you get a chance please .. I can’t see very well and need to really blow up a pic to see .. thx 🙏 if not that’s ok
Is it posible to update the Soundfond? I get my V8 Pixel and have some Problems. If i hold a Button it don't do what it should. The Buttons are o.k.. Don't know what the Problem is. Maybe a Update fix it?
You shouldn't have issues with the buttons. Make sure you fully charge the battery in your saber (5V1A USB wall charger). Send me a video of the problem at thefrugaljedi@gmail.com and I'll see if I can help you. If it's something I can't help you with like a hardware defect, then contact SABNEO directly.
Hello. Although this video is 6 months old, I had a question that I was wondering, it is: is this lightsaber v8 pixel resistant like the lightsaber v7 warrior (because I intend to use it to make small battle with my little brother). What do you recommend; Is the V8 lightsaber just as perfect for battles as the V7? Ps: I am French.
Nice video. I have a question.....I just got the V8 and it says to hold the sub button in standby mode. I press and hold the button but nothing happens. Am I missing something?
Def waiting for the v9 or v10 they just introduced the pixel features and it shows give it a few more renditions and it will be what this is trying to be
If I had to guess, the V9 will probably use the new SN-Pixel core with microSD card but who knows for sure and who knows how far into the future that will be.
I was curious if you know how to stop the lightsaber from shutting off from a single button press? I can't do any spin tricks due to the buttons being so sensitive. I tried contacting SabNeo customer support, yet their email address is listed as no longer in service. I'm worried about how flimsy the saber is, the blade wobbles around like it feels loose with the 2 screws. I was hoping there was going to be 4 screws to hold the blade in place. I can't change the lighting & boot up modes either on my V8 pixel
You can descrease the sensitivity of the buttons by backing off the hex screw on the back of the hilt directly behind where the buttons are. That controls the distance of the internal buttons. Use contact@sabneo.com. What email address were you trying? In most cases, I will say to screw the retention screws in evenly. With a saber that has a screw on each side of the emitter, tighten one screw completely so it pushes the blade to one side, then tighten the screw on the other side. What happens when you hold down the top button for 2 seconds and release? You should hear a sound effect. Holding down the bottom button for 2 seconds and releasing should cycle through the blade styles.
@@darthmperator You'll have to tighten the screw on the back until the buttons click. This is the biggest issue with raised buttons on the hilt. I'm going to talk to the companies about this. Hopefully they'll listen and release an alternate set of flat buttons that could be swapped with the originals.
Great video, really wish though someone would make a stress test video on the saber, would love to see whether it really is as durable for dueling as they say
I recommend tightening one retention screw fully and then the other side. The screws are on the opposite side of the emitter and I find it more secure to do it this way.
I like ur videos and reviews. I really am. Want to get a lightsaber for so long, just waiting for the one that is really worth it. Of course, if the price is also affordable. Finally, this one is really tempting. With free shipping offered, I wonder if they can ship it here, to my country. Watched almost all of ur videos and, this is the best of the bests for quality and price. Thanks so much and cheers from Malaysia. 😎🙏✌
Thanks for your feedback! It's so cool knowing where viewers are watching from around the world. I hope you find a lightsaber to your liking. If you have any questions about any of the sabers I've reviewed, I'll try to answer as best I can.
If you like holding the hilt right under the emitter then chances are you'll probably hit the buttons. I didn't find it heavy or off balance. I can weigh the saber tomorrow and give you an accurate number if that's something you'd like.
Hey man great video and I can't find many people with this lightsaber! I have one myself and it doesn't say charging when I plug it in. Could I be doing something wrong? Or do I have to use the cord it comes with. My phone charger is a type C cable too so I've been trying to use that. Could really use the help since it's charging right now (I hope) and I don't see any blue light 😬
@@thefrugaljedi I have a 100W charger with a 65W charging brick and it's not working. Been "charging" for an hour and a half and it still says no power need charge
I buy sabneo saber the Gold hilt version, and Im very disapointed. NOT bring SD CARD to change fonts, is the same boring star wars sound fonts, and the speaker its not too loud. The design of the hilt is more like the same, not spectacular, the only cool part is the Emitter extension. The charger is type C and you need to removed the handle hilt to plug the saber a little bit uncomfortable.
Sorry to ask a daft question but I'm colour blind so couldn't tell from the video. I'm looking to buy one of these for my son who is a huge fan on mace windu.. can this be set to purple?
Hello, I am troubled in the volume setting. Whenever I click a button, it's in the volume setting. When I try to change the blade style, it always goes to volume setting. This isn't the case for the ignition but it still is annoying to click the buttons and it turning out to be in the volume setting. I do not really appreciate this saber anymore because of this. I tried everything. The buttons also fell out because it can be unscrewed, it is almost impossible to tighten it again because of the size of the buttons. I am furious on the volume setting, I want to send you a video if there was a possible way to do so. I am angry at the v8
Is the screw on the back of the saber tightened too tightly? That will control the depth of the buttons. If it's too tight, it'll cause the buttons to press.
@@thefrugaljedi well I started a fb for dueling out here in little Elm Texas , then covid hit .Odd - I closed down the page but it got put back up and the page was featured in the chamber of comnerce site -so I may still get my dueling club up.
Holy crap, I got my saber stuck for a week on the Cross effect and only finally and especially due to this video got it unstuck. The guide that was packaged with this saber in Germany was not really helpul on having to flip your wrist and the button holding for 2 seconds did not seem to work as well. Got the V7 a few months back and I have to say, that one was a lot simpler (and also has some prettier colours) but the grip on this one just feels right. Anyways, since I am no longer sporting a blinding glorified watermelonsaber I can finally get to the best part - dueling. :D
So the reason the blade on this one isn't as vibrant as the old one is because the blades the v8 gets packaged with are like $30 and pretty durable. Cheap blade, but it's cheap with the purpose of dueling. I'd recommend getting a nicer blade for it if you choose to, just know those blades aren't gonna be as durable
Now I'm not saying you need one in any way, I do that's why I'm about to ask. Do you know of any companies that make plus sized jedi gear? Theirs some young kids I preform for around October but ol Mr jedi (me) can't really fit in his old jedi gear
I just got one and it actually is Amazing for its price most definitely. But how could they miss the option to change blade retraction/turnoff type. 🤔 🧐 they should release a firmware update. Edit: they also updated the box, now it is a lift top box and with a plastic insert rather than foam
Did you get the 2.0 version or the original? I know they changed the soundboards in the original V8 with their proprietary one which I believe has a standard retraction.
@@thefrugaljedi got it from Amazon sent to Australia, no mention of 2.0, maybe I should have gone with their official site. Strange oversight on their behalf, lightsabers have been out a long time already. Cheers for replying mate
www.sabneo.co.uk/ This is their official UK site. Unfortunately my discount code doesn't work on the UK site. They're not a scam. They do take a little longer to respond to emails. Hopefully you'll have no issues with your saber and you won't need to contact them for anything. I'm not sure about shipping times to the UK. Where I am in Canada it took around 3 weeks to get from the time I placed my order till it arrived at my door.
Just received the saber it's really a amazing quality for this Price. I just have one complain, after playing with it for 2 Hours, I still not manage to understand how everything works 😂. Thank you again for your review.
The SN-Pixel soundboard doesn't support customization. There is a new sn-pixel soundboard coming out that does and I will review it as soon as it's released. Check the addendum in the video description for things that I didn't mention.
It used to be SN-Pixel v3, now SABNEO is using their own board. They've improved the smooth swing with a better gyro, upgraded the speaker, and a new set of soundfonts.
@@thefrugaljedi great to hear all these improvements, and i can barely see any change in price from when i looked at the same saber a while back, ill take a closer look tomorrow. Also quick side note, i checked the US site and it said 60% off and free shipping, but i could not click on it to see which products was affected and when this discount ends, just hope it lasts.
@@V1510N_ They always say that lol. You can also use FRUGALJEDI discount code to get an additional 10% off the price. The crossed out price has NEVER been the selling price. I wish companies would stop doing that. There's another company that I've reviewed that has a buy one get one free ad except the price reflects two sabers so it's not really a BOGO deal.
Maybe I missed it in your review or somewhere else, but you should let your viewers know this company ships from China, I didn't find out until the foreign transaction fee showed up on my credit card! I would not have bought it if knew that!
P.S. I don't have a problem with it being made in China, it would be nice to know ahead of time since if I have to return it for any reason, the return shipping fees are on the customer, which from the US to China will not be cheap.
What country are you in? In Canada I didn't have to pay any additional fees. I'm not 100% sure but I believe they use different warehouses depending on where you are. I think the first time I ordered a V7 it shipped from the UK. But yes, they are made in China. TXQ Saber supplies the core.
Wait, you can't choose how is powers down? That's so stupid. I actually think that having anything but the blade igniting from the base, and then returning there, is dumb. That should be the only option for all sabers. Period. I was thinking of getting this. That's a deal breaker. Thanks for telling me.
@@thefrugaljedi Okay. Cool. Thanks for telling me. I might get one. I was thinking about it, then heard you say that it was a random power down, which in my opinion, there should only be up then down. I guess some people would choose something else just to have something different. To each their own. Anyway, thanks for the update.
I got mine today, and I’m majorly impressed by it. My only complaint is the sound is a little bad, but only for some of the sound settings. I remember I was messing with the settings without the manual, and it started playing Jurassic park and I couldn’t find out how to turn it off haha. Honestly for it’s price, 10/10
@@Groz_z yeah the blade is great, the weird thing about it tho, is if you order two lightsabers the connector will be sent on a separate package. It might be different now. It’s not too great for dueling, but for aesthetic I think it’s great for its buck. The most disappointing thing for me is orange doesn’t really look like orange, it’s basically a yellow. And some colors won’t look well unless you have a specific emitter on. It’s my first light saber so I give it maybe a 8.5/10
The soundboard is called SN-PIXEL. The SN stands for Super Neopixel. So for all intents and purposes, you could call this Neopixel. Regardless of the soundboard whether it's Sn-Pixel, Xenopixel, GHV, Proffie, Astaria, etc, they all use the same type of blade.
Hey, wanted to ask if you think its the best pixel for young jedi padawans such as myself. I saw your Sabneo V2 review and this predecessor seems to have a good all round solid build with practically no issues, and i also like the look of it, kinda reminds me of Rey.
It's a great saber! The updated soundboard with new soundfonts and better smooth swing with an enhanced speaker is mint. The one downside to this 2 button design is you might accidentally hit the buttons while doing one handed spins like Obi-Ani.
@@thefrugaljedi i kinda like the 2 buttons, give more control than the 1 button, where you need to hold down for 5 blinks to change ignition or whatever it was 😂
Absolutely would not recommend. I’m in a hurry to get it by Halloween, it finally arrived today and it won’t turn on at all and I left it charging for 4 hours. The little blue charging light doesn’t turn on either. I also didn’t get a charging cord or Allen key. Super disappointing. I won’t even be able to get a replacement by Halloween now.
What usb wall charger are you using? Some of the newer chargers aren't compatible. Also, remove the battery and make sure the metal tabs that make contact at the top and bottom of the battery are touching the battery when you reinsert it. Those metal tabs can be adjusted gently if they're not touching.
Unbelievable! Get your money back. They haven't been responding to my e-mails. I've been trying to tell them to get their act together. It reflects poorly on me too when I recommend a saber from them and they go and do this. The most I can do to help is recommend a different saber. This one costs less and has Bluetooth and MicroSD for adding soundfonts and customizing effects. ua-cam.com/video/gR0cSgR8ne0/v-deo.htmlsi=UD5dMFqWYmSfty-l
The Vanilla Ice reference earned you a like
I just recently got a V8 Pixel lightsaber. The switching between ignition modes AND/OR lighting modes are more of a, "press-hold-release" it's less than 2 seconds. It more of a one second hold. The instruction say long hold, but doesn't verify how long that hold is. Play around with it, you'll get it. Your saber is NOT broken!
Thanks for the info on that, I was also having some confusion pushing all the right buttons in order. 😏
question. When i have chosen a color, ignition effect and sound effect, will it stay on those settings until I change it again? As you have the saber...could you test it?
@@misterdiablo1981I have the saber and yes it does
Did y'all figure out if there was a way to change the retraction animation or is it just random? The random retractions really take away from this blade for me tbh, I might sell it
Do you know how I can get it to solid red because I can only get it once and a while and I'm a but confused
Great review AND great discount coupon. Thank You! YES-I purchased one using your link.
Thanks! Check out the other video that shows all 16 Soundfonts if you haven't seen it already
The Qui-Gon placement was perfect.
It’s so bright!
Yes they are!
I was already sold on the lightsaber and when you provided a discount that just helped even more 👍🏻. Great overall review good sir
Thanks for the support! What colour did you pick? My favourite is the gun metal.
I actually have this Sabre but now I’ve just discovered so many features I never knew it had
Is one of them being able to choose how the saber powers down? Because that's a deal breaker for me. I don't want a saber that ignites from the middle or top and I definitely don't want it to power down in those torpid ways. It makes no sense. There aren't light sabers in Star Wars that power down at the top.
@@darthollpheist1156 you can choose to have it power on like that but it also does it normally
@@lotionwilkie3188 Yeah. As long as I have the option to make it that way, it's fine. If it's a built in thing that can't be changed, I don't want anything to do with it. But I was told it has since been updated so that it no longer does the random power off.
Greetings and thank you very much for your review, the V8 is a really great lightsaber! - That being said I've had some issues with my saber: 1. I want to control the retraction; random doesn't do for me. 2. The very first milliseconds of the ignition sound get cut off when the saber hasn't been used for about 10 seconds. Try it with the Luke setting for example, there is something missing every now and then. This was the real dealbreaker for me, so I sold my V8. 3. Since the buttons pop out from the hilt, I happen to activate/deactivate things without intention. 4. And finally I would have wished for different Blaster- and Clash-sounds; they are always the same per patch.
Just ordered mine. A $300+ neopixel saber for less than $150!? Hell yeah!!
You're gonna love it. The design of the hilt is gorgeous. I love the emitter on it!
Thanks , awesome video,I can't wait to get mine.
I have read alot about Sabneo on Reddit and other platforms. And some people say they are LGT resellers and some say they are awesome, I believe they are awesome just like in this video
They are not LGT resellers. They are modified txqsaber soundboards but their hilts are LGT threaded and uniquely designed.
Thx I have already bought one and it’s coming
Oh my god! You had me in tears when I watched this earlier this week, but I didn't have time to comment it on it. That was really funny and actually really well done. So kudos to you for injecting that bit of rap humor into your reviews.
Thanks Kirk! Felt like a complete fool doing it. But that's the sacrifice I make for humoring my audience 🤣
@@thefrugaljedi Nothing wrong with having a little fun like that every once in awhile.
What should I charge it with? Is an iPhone charger good? And also one of the micro led doesn’t work and idk if it’s worth the time for them and me to get a new blade
iphone chargers are too powerful. 1a/5v max to be safe. You should contact sabneo with a picture of your blade showing the defective LED.
Thx
Thanks to Frugaljedi for the discount code! Got 10 percent off my order!! You Rock!🤘🏽🤘🏽✌🏽
Hay Frugal Jedi, lets start with a happy new year, I was messaging you the other day about this Saber and on the 22nd I went and ordered it, im going to have a go with the buttons and sort them out but for the price and looks of the black one I had to get it, my delivery time is the 3rd to the 9th of jan, keep up the great work with your videos they are great to watch. Jon
So you can't set the turn off mode? I think they should turn off from the end to the hilt but you can't set that? Also can you add startup sounds and visual effects from online? I saw that you can on some.
Xenopixel or YDDSaber pixel allow you to add more soundfonts and customize the saber. I've done a few reviews on different Xenopixel and the Revan from YDD. Soon, I'll be reviewing SN PIXEL V4 which also allows you to add more to it
Any tips on how to turn the twist ignition function on?
I believe twist ignition is always active. The saber must be in standby and not sleep mode for it to activate by twist.
Damn, I just ordered a silver one, but now you got me wanting the gun metal color.
I have mine stuck in the Goust mold & having trouble changing out of that mode.. I know how to change through the different modes with the bottom button.. But having trouble getting to the different ignition light up modes..
If memory serves me correctly, hold down the top button
I was wondering how hard you have to hit for it to make a strike sound?
It's very responsive to clash. Don't have to hit it hard to make it flash/sound on clash
Well, SabNeo just released the V8 pixel 2.0 and it looks awesome!
I just got the V8 a week ago. Damn.
I've ordered one for review
@@thefrugaljedi That 2.0 didnt turn out so good did it?
I bought this saber and it arrived today but was missing the charger and the screws and was wondering what I should do.
E-mail SABNEO support and let them know. Include your order number so they can look up your order and shipping address
Thank you for this review, just bought this saber using your code!
Awesome, thank you!
It's been improved since this review. It now uses the same core as the Nova
@@thefrugaljedi Do you by any chance know if its possible to install custom soundfonts onto the v8 pixel?
@@jac0bix985 These sabers can't do it BUT you could install an sn-pixel v4 2 button core into it if you want.
@@thefrugaljedi thx for telling me!
does this saber have a sd card in it so you can import your own sound fonts?
No. This is sn-pixel v3 which doesn't have that. Check out my Xenopixel reviews for that feature.
Been wanting on your review since I saw the V8 on their website. Thanks. Great review as usual. Definitely have to get one to go with my V7
Which is better?
@@michaelvoorhees5978the v8 is miles better
Did you switch to a longer blade to get tip drag to work? It comes with a 32" blade doesnt it and tip drag light doesnt work as its coded for 36" blades?
Mine was not coded for 36" blade. I demonstrated the tip drag in this video using the original 32" blade it comes with.
dude you did it :D thanks to your video I understand the controls of my V8, thank you very much. Btw, you need to tell me where you got your Jedi Robe, looks awesome
You're welcome! Check out my review of the Jedi robes in the channel. I have a Where To Buy link in the description of that video.
Mine doesn't have a charge light. Only got it a few days ago. Wonder why its missing. I have no idea when its charged at all
The 2 button v8 core doesn't have a charging light. Just noticed that now. It'll say when it's fully charged. Usually takes 6 - 8 hours
Does this have standard ignition standard retract? Like a normal movie saber?
Unfortunately no. The standard retract chooses randomly from 3 types. Normal, tip or middle
@@thefrugaljedi I do not like that at all... that changed my mind about it
Hi, my v8 just says sabe o v8 when I hold down the main button. How do I stop it from doing that and change the saber ignition light effect
Try removing and reseating the battery. Then try pressing both buttons at once to switch to sound mode and again to switch back to operation mode.
Thx
and how do I remove the battery?
@@Blockybeanboi I realize taking the battery out is a bit of work. You have to unscrew the buttons and remove them, remove the screw on the back then slide the core out
I’m sorry for asking so many questions
I’m getting this saber and this was helpful
1:40 😂
Hi unfortunately can’t use code on Australian site but I think I’m going to get one .. is yours the grey or the silver do you think ? I like yours
It's the grey one, for sure.
@@thefrugaljedi oh darn I ordered the silver one never mind I kinda like the super shiny silver one too .. I’m sure it will be just as nice as your grey one .. I asked Sabneo which one yours was from screenshot they said silver .. never mind
@@scifidikittycat9670 If they haven't shipped it yet, you can always ask them to switch it to grey. They might be able to do that for you.
@@thefrugaljedi thanks I’ll have another look I still can’t decide if I want yours with the accent or the super shiny cheers
@@thefrugaljedi could you send me closer up pic on messenger of the colour accents on the saber you were taking about if you get a chance please .. I can’t see very well and need to really blow up a pic to see .. thx 🙏 if not that’s ok
Is it posible to update the Soundfond?
I get my V8 Pixel and have some Problems. If i hold a Button it don't do what it should. The Buttons are o.k.. Don't know what the Problem is. Maybe a Update fix it?
You shouldn't have issues with the buttons. Make sure you fully charge the battery in your saber (5V1A USB wall charger). Send me a video of the problem at thefrugaljedi@gmail.com and I'll see if I can help you. If it's something I can't help you with like a hardware defect, then contact SABNEO directly.
Hello.
Although this video is 6 months old, I had a question that I was wondering, it is: is this lightsaber v8 pixel resistant like the lightsaber v7 warrior (because I intend to use it to make small battle with my little brother).
What do you recommend; Is the V8 lightsaber just as perfect for battles as the V7?
Ps: I am French.
With pixel blades you always run the risk of damaging the LEDs in the blades. You can duel with them but keep it light to medium contact.
@@thefrugaljedi Okay, so I still have to Do Careful with .
Thank you for your reply. 🙂
High quality, referring to the lightsaber and the video. Keep doing what you’re doing chief :)
Thank you!
thing I don't like is that you have to take the hilt apart to charge it. I would have preferred an easy access charging port.
That's the trade-off with 2 button designs, I guess.
@@thefrugaljedi I just got mine and the 2 button system doesn't even work I can't get the ignition to change or the colors. worthless lightsaber.
I'm thinking of ordering this for myself. Do you happen to remember how long it took to ship? just wondering. Thanks and great review!
It took 2 1/2 weeks to get here.
@@thefrugaljedi thank you so much :)
question. When i have chosen a color, ignition effect and sound effect, will it stay on those settings until I change it again?
i believe when you set a color on a sound font it will save when you change it but im not too sure about the ignition effect
I'll double check later today but I believe it remembers colour and blade type.
@@thefrugaljedi thanx
@@susoluss7305 thanx
@@thefrugaljedi now I have to wait...😮💨
Nice video. I have a question.....I just got the V8 and it says to hold the sub button in standby mode. I press and hold the button but nothing happens. Am I missing something?
What are you trying to do?
@@thefrugaljedi I was trying to change the ignition. I figured it out. Let's just say the instructions don't match what to do 😂
@@VediRepublic so you got the ignition to start from the hilt? If so how do you do that? I just ordered one and it's on the wsy
How do you make it play music, my randomly started playing the jurrasic park theme
ua-cam.com/video/8roSSL8zKt4/v-deo.htmlsi=RcbEFeMsoWOg6HEG&t=655
Yea I got mine and I’m getting connnection issues. Only lights up when I move it. Also changing effects doesn’t work on my saber for some reason.
Sounds like it's set to Ghost Blade
Def waiting for the v9 or v10 they just introduced the pixel features and it shows give it a few more renditions and it will be what this is trying to be
If I had to guess, the V9 will probably use the new SN-Pixel core with microSD card but who knows for sure and who knows how far into the future that will be.
I was curious if you know how to stop the lightsaber from shutting off from a single button press? I can't do any spin tricks due to the buttons being so sensitive.
I tried contacting SabNeo customer support, yet their email address is listed as no longer in service.
I'm worried about how flimsy the saber is, the blade wobbles around like it feels loose with the 2 screws. I was hoping there was going to be 4 screws to hold the blade in place.
I can't change the lighting & boot up modes either on my V8 pixel
You can descrease the sensitivity of the buttons by backing off the hex screw on the back of the hilt directly behind where the buttons are. That controls the distance of the internal buttons.
Use contact@sabneo.com. What email address were you trying?
In most cases, I will say to screw the retention screws in evenly. With a saber that has a screw on each side of the emitter, tighten one screw completely so it pushes the blade to one side, then tighten the screw on the other side.
What happens when you hold down the top button for 2 seconds and release? You should hear a sound effect. Holding down the bottom button for 2 seconds and releasing should cycle through the blade styles.
@@thefrugaljedi Having the same issue. Messing with the screw in the back but I can't change the ignition effects or the blade styles.
@@darthmperator You'll have to tighten the screw on the back until the buttons click. This is the biggest issue with raised buttons on the hilt. I'm going to talk to the companies about this. Hopefully they'll listen and release an alternate set of flat buttons that could be swapped with the originals.
You said the emitter is interchangeable… with which type of parts? LGT, Saberforge, etc.
LGT threaded
I watched the part about the volume level but I didn’t hear nothing about how to mute
Continuously pressing the bottom button will mute the saber. Press the top button to increase volume
Great video, really wish though someone would make a stress test video on the saber, would love to see whether it really is as durable for dueling as they say
I hear ya. I'm too scared to duel with any pixel blades.
@@thefrugaljedi mines arriving today, I’ll be the dummy
I recommend tightening one retention screw fully and then the other side. The screws are on the opposite side of the emitter and I find it more secure to do it this way.
@@thefrugaljedi so tighten both retention schools fully?
@@RJTheCerealGuy tighten one fully so it pushes the blade to one side then tighten the other side.
yo great review, just wondering how long would it take to ship
It took 10 business days to Canada
@@thefrugaljedi thanks bro appreciated big fan
Love your reviews! Do you know if the coupler fits both the V7 and V8?
Yes. You can even Frankenstein them together. Emitters, grips and pommels are swappable
I like ur videos and reviews. I really am. Want to get a lightsaber for so long, just waiting for the one that is really worth it. Of course, if the price is also affordable.
Finally, this one is really tempting. With free shipping offered, I wonder if they can ship it here, to my country. Watched almost all of ur videos and, this is the best of the bests for quality and price. Thanks so much and cheers from Malaysia. 😎🙏✌
Thanks for your feedback! It's so cool knowing where viewers are watching from around the world. I hope you find a lightsaber to your liking. If you have any questions about any of the sabers I've reviewed, I'll try to answer as best I can.
Hi
Are the blades compatible with other swords?
Best Regards
Yes. With other pixel such as Xenopixel, sn-pixel, Astaria, cfx, proffie
With that discount code is that ontop of the already discounted Price on their site ?
Yes! Brings it to $116.99 I believe
@@thefrugaljedi thanks 😊
Did the buttons get in the way as in spinning the Saber and accidently pushing it and it turning off? And how heavy is it?
If you like holding the hilt right under the emitter then chances are you'll probably hit the buttons. I didn't find it heavy or off balance. I can weigh the saber tomorrow and give you an accurate number if that's something you'd like.
@@thefrugaljedi oof I see. And nah it's all good. I appreciate the information. Thank you!
@@thefrugaljedi can you please weigh it? Looking at sabers for my partner and boy :)
@@nata697 1.6 lb
Looking to get one, but when I go to purchase it there is no tax added. It's just a flat 129.99 did this happen with anyone else?
Not sure what to tell you. Could be that the tax is already hidden in the price?
Hey man great video and I can't find many people with this lightsaber! I have one myself and it doesn't say charging when I plug it in. Could I be doing something wrong? Or do I have to use the cord it comes with. My phone charger is a type C cable too so I've been trying to use that. Could really use the help since it's charging right now (I hope) and I don't see any blue light 😬
Use a different usb cable and make sure the charger is 5v/1a
@@thefrugaljedi okay thank you very much I will try this 🙏
@@thefrugaljedi I have a 100W charger with a 65W charging brick and it's not working. Been "charging" for an hour and a half and it still says no power need charge
@@speechless1738 what's the voltage and amperage rating?
@@thefrugaljedi it says that the input is 100-140v and the most I'm seeing is 3 amps
I buy sabneo saber the Gold hilt version, and Im very disapointed.
NOT bring SD CARD to change fonts, is the same boring star wars sound fonts, and the speaker its not too loud.
The design of the hilt is more like the same, not spectacular, the only cool part is the Emitter extension. The charger is type C and you need to removed the handle hilt to plug the saber a little bit uncomfortable.
Did you buy the saber before or after you watched my review?
If you hit the top button once will it turn the saber off?
It'll put it back intto standby. Holding it down till you hear "Sabneo V8" will put it completely to sleep.
Great review my friend, I just order mine and used your code I saved almost $14.00. Happy Holidays!!!!
Happy holidays to you and yours!
Just sent away for one another to my collection it will be 9 now.
Sorry to ask a daft question but I'm colour blind so couldn't tell from the video. I'm looking to buy one of these for my son who is a huge fan on mace windu.. can this be set to purple?
Yes it can
@@thefrugaljedi thank you :) appreciate the review it helped me find something suitable.
Is there a mute function? & can u turn off and on clash and motion controls?
Yes there is mute. Just keep pressing volume down till the sound shuts off
You can turn off clash but cannot turn off motion control
@@thefrugaljedi and my other question... 😅
Edit:. You can turn clash off by pressing both buttons while the saber is ignited
Bought one
I haven't seen any info on a blade plug for this saber , any ideas ?
C$ 33.51 | LGT Saberstudio Blade Plug 1 Inch Diameter For LED and Pixel Lightsaber
a.aliexpress.com/_mr8CEKU
@@thefrugaljedi Thank you /
@@kevindonovan9379 Just make sure you order a pixel one. Unfortunately the pixel plug on the V8 doesn't have LEDs.
Hello, I am troubled in the volume setting.
Whenever I click a button, it's in the volume setting. When I try to change the blade style, it always goes to volume setting.
This isn't the case for the ignition but it still is annoying to click the buttons and it turning out to be in the volume setting.
I do not really appreciate this saber anymore because of this.
I tried everything.
The buttons also fell out because it can be unscrewed, it is almost impossible to tighten it again because of the size of the buttons.
I am furious on the volume setting, I want to send you a video if there was a possible way to do so.
I am angry at the v8
Is the screw on the back of the saber tightened too tightly? That will control the depth of the buttons. If it's too tight, it'll cause the buttons to press.
@@thefrugaljedi what screw on the back?
@@thefrugaljedi the button screw thing?
@thefrugaljedi the buttons, cause it screws on
@@CraxyGAMES23 send me a message on Facebook or Instagram. I'll show you what I'm talking about when I get home
01:00 - 01:35 was enough to makje me subscribe to you channel. 🤣Love how much dedidcation you put in there 🤌
Lol. Thanks. I don't think we've seen the last of Saba Sabe.
Are you going to do a video over all the sound fonts ?
I could create a short showcasing each soundfont 🤔
@@thefrugaljedi that would be just fine ! I just wanted to see all the sound fonts
How do you put it in
Can you be more specific?
Is it workable for dueling clubs like my RGB model ?
They say you can duel with it but I personally don't. The LEDs in the blade could get damaged.
@@thefrugaljedi my thought is that you should duel with the rgb model ...
@@Fraiyia agreed
@@thefrugaljedi well I started a fb for dueling out here in little Elm Texas , then covid hit .Odd - I closed down the page but it got put back up and the page was featured in the chamber of comnerce site -so I may still get my dueling club up.
Holy crap, I got my saber stuck for a week on the Cross effect and only finally and especially due to this video got it unstuck. The guide that was packaged with this saber in Germany was not really helpul on having to flip your wrist and the button holding for 2 seconds did not seem to work as well.
Got the V7 a few months back and I have to say, that one was a lot simpler (and also has some prettier colours) but the grip on this one just feels right. Anyways, since I am no longer sporting a blinding glorified watermelonsaber I can finally get to the best part - dueling. :D
That's awesome to hear!
You made me question whether to get the 8 or 7 now..........
@@michaelvoorhees5978 the 8 is phenomenal just need to get used to the controls, once you’ve got it it’s like butter
So the reason the blade on this one isn't as vibrant as the old one is because the blades the v8 gets packaged with are like $30 and pretty durable. Cheap blade, but it's cheap with the purpose of dueling. I'd recommend getting a nicer blade for it if you choose to, just know those blades aren't gonna be as durable
@@RJTheCerealGuywere you able to fix the retraction animations or is it random for you too?
Now I'm not saying you need one in any way, I do that's why I'm about to ask. Do you know of any companies that make plus sized jedi gear? Theirs some young kids I preform for around October but ol Mr jedi (me) can't really fit in his old jedi gear
Are you talking about a costume? I reviewed a Jedi outfit that offers pretty big sizes.
I just got one and it actually is Amazing for its price most definitely. But how could they miss the option to change blade retraction/turnoff type. 🤔 🧐 they should release a firmware update.
Edit: they also updated the box, now it is a lift top box and with a plastic insert rather than foam
Did you get the 2.0 version or the original? I know they changed the soundboards in the original V8 with their proprietary one which I believe has a standard retraction.
@@thefrugaljedi got it from Amazon sent to Australia, no mention of 2.0, maybe I should have gone with their official site. Strange oversight on their behalf, lightsabers have been out a long time already. Cheers for replying mate
If you wanna take that saber to the next level, you can buy an sn-pixel v4 2 button core for it. You will not be disappointed 😉
Awesome video man, thanks! Any idea how much it weighs?
I'll get back to you later today. But my guess is 2 lbs
Sorry for the delay. I've just been really busy with work.
1.6 lbs with the blade
Does the UK have a version of this site or is it a scam?
www.sabneo.co.uk/
This is their official UK site. Unfortunately my discount code doesn't work on the UK site.
They're not a scam. They do take a little longer to respond to emails. Hopefully you'll have no issues with your saber and you won't need to contact them for anything. I'm not sure about shipping times to the UK. Where I am in Canada it took around 3 weeks to get from the time I placed my order till it arrived at my door.
Hi great review but Unfortunately your 10% code is not valid in Canada...
Yes it is. I used it myself. I am in Canada. Which site are you going to?
I just tested it and it is definitely working
@@thefrugaljedi Thx It's working ! I use the link 😉 Nice treat for Christman
@@docteurserie7362 glad it's working for you!
Just received the saber it's really a amazing quality for this Price.
I just have one complain, after playing with it for 2 Hours, I still not manage to understand how everything works 😂. Thank you again for your review.
Does the blade still shine in daylight?
It does to an extent. In full sunshine outside it would be difficult to see but indoors in a lit room, it is still quite bright.
@@thefrugaljedi thanks
(5:47 for ASMR)
Lol. I stopped taking off plastic wrap in the vids because it's so loud in the mic.
Anybody having buttons issues...pressing them when spinning....any solution?
I've brought this up with SABNEO and TXQSABER and I'm hoping they'll release a redesigned set of buttons. The buttons unscrew and COULD be changed.
SD card for customization?
The SN-Pixel soundboard doesn't support customization. There is a new sn-pixel soundboard coming out that does and I will review it as soon as it's released. Check the addendum in the video description for things that I didn't mention.
What soundboard is in this?
It used to be SN-Pixel v3, now SABNEO is using their own board. They've improved the smooth swing with a better gyro, upgraded the speaker, and a new set of soundfonts.
@@thefrugaljedi great to hear all these improvements, and i can barely see any change in price from when i looked at the same saber a while back, ill take a closer look tomorrow.
Also quick side note, i checked the US site and it said 60% off and free shipping, but i could not click on it to see which products was affected and when this discount ends, just hope it lasts.
@@V1510N_ They always say that lol. You can also use FRUGALJEDI discount code to get an additional 10% off the price. The crossed out price has NEVER been the selling price. I wish companies would stop doing that. There's another company that I've reviewed that has a buy one get one free ad except the price reflects two sabers so it's not really a BOGO deal.
website wont let me use a prepaid visa why not
You'd have to reach out to SABNEO. contact@sabneo.com.
@@thefrugaljedi did that crickets thinking this is a scam
Maybe I missed it in your review or somewhere else, but you should let your viewers know this company ships from China, I didn't find out until the foreign transaction fee showed up on my credit card! I would not have bought it if knew that!
P.S. I don't have a problem with it being made in China, it would be nice to know ahead of time since if I have to return it for any reason, the return shipping fees are on the customer, which from the US to China will not be cheap.
What country are you in? In Canada I didn't have to pay any additional fees. I'm not 100% sure but I believe they use different warehouses depending on where you are. I think the first time I ordered a V7 it shipped from the UK. But yes, they are made in China. TXQ Saber supplies the core.
@@thefrugaljedi I'm in the U.S.
@@thefrugaljedi Wanted to let you know I received my V8 in good condition and sooner than expected. Thanks again for the 10% discount code!
@@markotis5053 Sweet! Have fun!
Tip drag?
Yes
@@thefrugaljedi Light & sound?
Wait, you can't choose how is powers down? That's so stupid. I actually think that having anything but the blade igniting from the base, and then returning there, is dumb. That should be the only option for all sabers. Period. I was thinking of getting this. That's a deal breaker. Thanks for telling me.
They've updated the original V8 pixel and now call it 2.0. They have changed the soundboard and it now has the standard retraction.
@@thefrugaljedi Okay. Cool. Thanks for telling me. I might get one. I was thinking about it, then heard you say that it was a random power down, which in my opinion, there should only be up then down. I guess some people would choose something else just to have something different. To each their own. Anyway, thanks for the update.
@@thefrugaljediso they have fixed the retraction issue in the 2.0? If so I might get it.
@@AshMCM yes they have as well as a more powerful speaker and increased sensitivity for smooth swing
@@thefrugaljedi I got the other one you did a review on, the judger. I like that one much better. 😁
I got mine today, and I’m majorly impressed by it. My only complaint is the sound is a little bad, but only for some of the sound settings.
I remember I was messing with the settings without the manual, and it started playing Jurassic park and I couldn’t find out how to turn it off haha.
Honestly for it’s price, 10/10
Maybe tell us how to turn the sound off?
@@michaelvoorhees5978 I think you hold both buttons, then press the bottom one for the volume, like as if it is a remote on your TV
Is the blade still fine?
@@Groz_z yeah the blade is great, the weird thing about it tho, is if you order two lightsabers the connector will be sent on a separate package. It might be different now.
It’s not too great for dueling, but for aesthetic I think it’s great for its buck.
The most disappointing thing for me is orange doesn’t really look like orange, it’s basically a yellow. And some colors won’t look well unless you have a specific emitter on. It’s my first light saber so I give it maybe a 8.5/10
@@jazz4344 Thank you!
Is this considered a neopixel saber?
The soundboard is called SN-PIXEL. The SN stands for Super Neopixel. So for all intents and purposes, you could call this Neopixel. Regardless of the soundboard whether it's Sn-Pixel, Xenopixel, GHV, Proffie, Astaria, etc, they all use the same type of blade.
What soundboard is in this saber? It seems a bit like a Xenopixel, but it has some extra features and some less features than the Xeno.
SN-Pixel v3. This cannot be customized like a Xenopixel can. SN-Pixel microSD version (v4?) will change that when it releases
My issue is with the branding on the saber. If you're using this for cosplay or short films, it just kind of ruins the immersion.
I want it
Hey, wanted to ask if you think its the best pixel for young jedi padawans such as myself.
I saw your Sabneo V2 review and this predecessor seems to have a good all round solid build with practically no issues, and i also like the look of it, kinda reminds me of Rey.
It's a great saber! The updated soundboard with new soundfonts and better smooth swing with an enhanced speaker is mint.
The one downside to this 2 button design is you might accidentally hit the buttons while doing one handed spins like Obi-Ani.
@@thefrugaljedi i kinda like the 2 buttons, give more control than the 1 button, where you need to hold down for 5 blinks to change ignition or whatever it was 😂
@@thefrugaljedi updated soundboard? Did they update it after release? Or are you talking about a previous saber from sabneo that its an upgrade to?
@@V1510N_ the V8s are all 2.0 now. it will have different soundfonts, ignitions, plus what I mentioned in the previous post.
@@thefrugaljedioh but it still keeps the 2 buttons and design right? Just with better hardware? Sorry for all the questions btw
Im getting a v4 pixel lol
Absolutely would not recommend. I’m in a hurry to get it by Halloween, it finally arrived today and it won’t turn on at all and I left it charging for 4 hours. The little blue charging light doesn’t turn on either. I also didn’t get a charging cord or Allen key. Super disappointing. I won’t even be able to get a replacement by Halloween now.
What usb wall charger are you using? Some of the newer chargers aren't compatible. Also, remove the battery and make sure the metal tabs that make contact at the top and bottom of the battery are touching the battery when you reinsert it. Those metal tabs can be adjusted gently if they're not touching.
dude and I'm so fucking sorry but I already oirdered the saber, otherwise I totally woudl've used your discount code...
It's all good. Thanks for your support and subscription. Hope the video is helpful to you.
@@thefrugaljedi yea sure, I'll let you know if I agree wth your review once mine arrive (can't waiiit 😩)
@@MrMolotow97 Is this your first pixel lightsaber?
@@thefrugaljedi will be, yes. wasn't willing to spend +400$ on sth more 'official'
i think this company is a scam. they took my paypal money and now i cant complete the order. seems extremely fishy.
Definitely not a scam. Email them at contact@sabneo.com and they'll get it sorted out
Just bought this saber because of this review and they sent me a used broken saber what a company 👎👎.
Unbelievable! Get your money back. They haven't been responding to my e-mails. I've been trying to tell them to get their act together. It reflects poorly on me too when I recommend a saber from them and they go and do this. The most I can do to help is recommend a different saber. This one costs less and has Bluetooth and MicroSD for adding soundfonts and customizing effects.
ua-cam.com/video/gR0cSgR8ne0/v-deo.htmlsi=UD5dMFqWYmSfty-l
Thank you for making fun of every white boy who wishes he wasn’t
Haha! You hit the nail on the head!