Відео

Arduino doesn't make changes to the SD card. It's uploading code directly to the proddieboards internal memory.

I'll look it up

@thefrugaljedi I tried to find it again so I could post a link but I guess they discontinued it, it's on their Facebook page though so maybe you could petition them to relist it.

Glad you enjoyed it!

Yes, call them force1, force2, etc. To activate force effects, hold the button while the blade is facing up and twist your wrist.

Nvm i just found out

Sorry

Thanks for your support! It's hard to just own one. So many awesome sabers out there!

I've never tried but I'm assuming you need the microSD card installed. For XenoRGB V3, that one works with or without MicroSD

@thefrugaljedi Thanks for the reply ! I see. so Xeno3 xRGB sounds interesting i might go for that one for dueling and spinning tricks

@MxskedTurbo It's perfect for that. You could even copy the soundfonts from your pixel onto the RGB.

Amazing for the price! Make sure you get the lightsaber pro app to really unlock the potential of h-pixel. You can watch the snpixel v4 tutorials as it's the same method for creating effects

Are you talking about the retention screws that are included? Were they missing from your package?

@@thefrugaljedi Thank you very much for your reply! Yes, the retention screws. I got it as gift (baselit version). I found some online but I am not sure about the size. Would it be 3mm ? Thank you in advance!

You'd be best contacting TXQ directly on their official AliExpress store or through Instagram. Let them know you have the Ghost and I'm sure they could sell you the retention screws for it at a minimal cost. TXQSABER Official Store a.aliexpress.com/_mPyPemj instagram.com/txq.saber?igsh=MTAybXh0ODY3MjRlNg==

@@thefrugaljediThanks a lot, I appreciate your time and energy!

This might sound like an obvios question but is the saber muted?

@@thefrugaljedi i removed the battery, plugged it in and quickly plugged it out for a reset and now i got my sound back on

@ng7848 Good job! Sometimes a hard reset by pulling out the battery and reinserting solves lots of problems.

@@thefrugaljedi Thank mate, now the lights don't work so i'm going to do a reset again tomorrow, hopefully the last one

I'll try to get in touch with them. I believe they're on Holidays during January so that's why you haven't heard from them.

@thefrugaljedi thabmnk you for responding🤩. I thought it might have had something to do about that 😅 Keep up the great work!

I got a hold of them. You should be getting an update very soon.

@@thefrugaljedi thank you. I got an update and shipping this morning 😊

Waaay back they were using a modified TXQ SNPIXEL V3 core. They're now using their own proprietary cores. They decided to get rid of the music which means more room for soundfonts.

5.5x2.1 5V DC Barrel Jack Power Connector www.aliexpress.com/item/4001089813006.html

I've been busy working with WARXSABER developing new sabers and implementing new ideas. SABNEO hasn't been the greatest at communicating and I think it's gonna come down to me just sending them a design for a hilt.

No you can't. You'll want to look for either a Xenopixel V3 or SN-PIXEL V4 Pro. There are other options out there but those 2 are the most common.

I have seen this hilt on Amazon too

Really

@@jeremywinfield2217 Sold by Saberforms but RGB instead of neopixel

Is there a link to this on Amazon?

@@jeremywinfield2217 On amazon,ca, search for saberforms. It'll be the first search result

Try a different SD card. Try connecting using Xeno configurator app and perform a factory reset

@@thefrugaljedi yep done that, cant connect to the app, the saber wont power up to connect.

@Jeff-vi2nh I've never heard of these errors before. You could try installing an older version of the firmware. If it boots up, then just do firmware updates via the app

@ Thank you, that has been tried as well. Looks like this has messed up the Chipset, i was hoping you may know a fix for it . Looks like it is a replacement core. Thanks.

Heysaber should offer it without all the extra bells and whistles to be competitve

No it's not. The prop file TXQ uses isn't optimized for Proffie OS7

@thefrugaljedi ohh makes sense. I dont have a TXQ saber but got a myself a proffie saber regardless and this was my first time. This video series helped me get that push to finally attempt my first flash / upload to the board. I made my own config with the help of a config tool on proffie website. Surprisingly it went without any issues. These videos prepped me really well. When I installed the drivers for the board I rebooted my PC (win10) before attempting anything and it didn't give any errors.

@@AlluttajaYT You've taken your first steps into a larger world 😏

Nope. This is exclusively for the original Sn-pixel v4 or H-Pixel. I will be doing the Sn-pixel v4 pro tutorial soon

@thefrugaljedi Many thanks!

I do own a cross guard hilt, Ultimate Works CERECROSS I just picked up, but at least the cross blades fold up and it has adequate blade depth - but didn't get in proffie. I just like their system because most of their hilts allow to use swappable chassis of their make and so far, they're the only seller I know of who don't require you to purchase all of their hilts fully installed, with or without blades. You can also buy their chassis separately, so you can save some money, but they do charge for shipping. But once the hilts sell out, that's it. They usually don't refill their stocks once depleted, unless there's a huge demand, but they've taken years to do so.

You can download it from darkwolfsabers.com along with the latest firmware

a couple of hours give or take before needing a recharge

On Aliexpress www.aliexpress.com/item/4001089813006.html Choose 5.5x2.1

Amazon link a.co/d/3gRsrij Choose 5.5x2.1

@@thefrugaljedi thank you so much, lost my cable for 2-3 years now lol

You probably have the newer versions with XRGB V3. Watch this video... ua-cam.com/video/PvwHm8hReBQ/v-deo.html

@thefrugaljedi I don't think so. I tried it out and only got 4 blinks (characters sound effects) and after that no more, then it shuts off. So unless I need an sd card or download an app. I'm not sure how to get the motion control off

@@Russ530 does the button light up white?

@@thefrugaljedi Yes!

@@Russ530 Watch the video I linked in my previous reply. You have the newer XRGB V3 cores. Download the Xeno Configurator app and away you go. You can also watch the Advanced Tutorial once you've learned the basics ua-cam.com/video/0dwQL003gjs/v-deo.html

NSABERS doesn't sell on Amazon but their official site accepts Credit Card, Shop Pay, Paypal and Google Pay.

You could put them around the grips but I prefer it without. I don't wanna cover up the patterns on the hilts!

Yes. Steady, Pulse, Unstable, Fire to name a few can be a solid colour. Bladestyles are listed in the description.

I've yet to see a 2 button LGT core. The nice thing is you can now use bluetooth to control the saber settings provided they sent you the newer LGT XRGB V3 cores. (White button with Imperial Logo) Here's a video that can help you learn all about your sabers ua-cam.com/video/PvwHm8hReBQ/v-deo.html

And if you wanna step it up to the next level, check out the Advanced Tutorial for XRGB V3

Do you have this version or the newer ones with the white button and imperial logo?

@@thefrugaljedi Yes! The one with the Imperial Logo! I already messed it all up and my wife keeps waking up threatening to divorce me of all the noise. I need to figure it out… 🙏🏼

@jorgepascal-yourpersonalme9522 use the Xeno configurator app and you can reset it from there.

Also, watch this ua-cam.com/video/PvwHm8hReBQ/v-deo.html

@@thefrugaljedi Thank you! May the for… Nevermind, thank you!!

For RGB sabers there is no need to set blade length. Is that what you're asking?

Is seems my blade does not light up to maximum

@@ionutmarton5254 do you have a neopixel lightsaber? Can you give me more information?

Yes you can. You can follow the same tutorials I did for SN-Pixel V4. H-Pixel uses the Lightsaber Pro app which is pretty much the same as Forcepark v1

@thefrugaljedi one more thing...besides eBay where can I buy a basic SNV4 Pixel lightsaber for cheap? Everything is now a SNV4 Pixel Pro now!!

@BrandonLin-x3j that's gonna be tricky. You could try contacting TXQ on AliExpress and see if they have any left in stock

@@thefrugaljedi understood

Yes. All of the SN-PIXEL V4, V4 PRO and Super RGB have Bluetooth control via Forcepark app

I can't be fighting anyone at the moment. Way too cold outside. They are durable and hold the blades 2 1/2 inches deep into the emitter. 2 screws hold the blade in place. Check out the NV7 Warrior by WARXSABER as well. I designed it with the company. It's my brainchild :)

It doesn't even though it should! When they programmed it, the soundboard is set to a 36" blade. I've tried accessing hidden options (Usually click the button over and over in deep sleep) to change it but it didn't do anything.

It should only do that if the battery is completely drained or the USB cable is finicky. Try a different cable and if this is your first time charging it, it should stop saying that once the battery gets enough juice to bring it out of an extremely depleted level.

@ alright, thanks! It’s not stopping whatsoever 🙈 I think I‘ll send it back then and hope for a better one 😄👍🏻

@ Bingo!! It was the charging cable 🙌🏻😅 Thanks a lot for your hint and all the best 🤗

Yes! Whether you get RGB OR Pixel, the saber will remember the color and blade style for each soundfont.