Love your videos Dustin like how you explain to people in new things you do it’s like you give them a little bit of training that way if they ever do this kind of job they know what they’re doing so people will learn a lot from you and that’s very nice of you to take your time and explain thank you
Great video, love how you explained how to secure the last vehicle, I was not utilizing those two hooks to secure to the stinger. This is like tip 3 or 4 that will make me a better operator. By the way how did the tow go, any damage to any of the trucks, I’m always leery on how close I can get to the wrecker/flatbed. Keep it up great job.
one of my scariest tows was when a buddy asked me to use my car dolly to get his truck home ....during a freezing rain alert....the roads were awful.....so i took the chance because its a friend and when we get to the truck i notice he failed to mention the fully loaded utility trailer that was attached to it...when i complain about it he says "well you never would have helped if i told you that"....we got it home safely (and slowly) but i tell ya i never trusted that guy again...never helped him again either
Another educational video Dustin. Too bad you couldn't put a couple 4x4s under the rear wheels of the truck on the bed to get a little more clarance for turning. I was hoping to see how tight you could turn with the setup you had. Safe journeys!
Nice job. One question: Except for a longer overall length of the tow. Why not put the shorter truck on the bed, and the longer truck on the wheel lift?
Oh yes Dustin if you have time that would be an interesting video how it all works before my health got to bad I actually wanted to get into the business but I don't believe with seizures it'd be safe lol but a how to video would be awesome when you have time 😊
Hi Dustin from New Zealand, love your vids. Curious do you haul much, or any machinery as in excavators, bull dozers agriculture machines.if so, would like to see securement on those. Thanks and cheers.
For more clearance you could to from front, however, I know you'd have to pull drive shaft. Would you have to pull drive shaft if 4wd and you put transfer case in neutral?
I absolutely hate using my wheel lift. I live in a city that was built up before cars existed. The roads are too narrow, the corners are too sharp, and half the streets around here are still cobblestone.😮
Wouldn't mind seeing a how to video. What ever company that is they torture the insides of them pickups. How is the steering wheel looking they way it looks...sheesh.
At least they aren't wrecked, stolen, broken, chased, burned, flipped, or flooded. Looking at the interior, it looks like the owner got their money's worth out of them. That transport reminds me of the problem the computer scientists use to demonstrate why a quantum computer would change the world. They select 30 or so cities, and ask today's fastest computer to determining the shortest route to connect all the cities without visiting any more than once. It doesn't sound that hard does it, but no computer today can handle the number of possible routes. They claim that today's machines could work on the problem for thousands of years, and still not solve it. Yet they say that a functioning quantum computer could solve the problem in minutes. That is why they are spending billions in the USA & China trying to build one. They say that it would be the greatest invention since the wheel! Instead of trial and error drug development, they could design drug molecules to target different diseases, and maybe even cure cancer.
Who else loves this channel?
I do this daily as a job.
Dustin, I like the orange straps. It's something new.
Love your videos Dustin like how you explain to people in new things you do it’s like you give them a little bit of training that way if they ever do this kind of job they know what they’re doing so people will learn a lot from you and that’s very nice of you to take your time and explain thank you
Keep up the good work!
Thank you Dustin, this old girl loves watching you work! Very professional 😊.
Awesome job Dustin.. good idea putting long wheelbase on your truck. if you had towed it behind- would’ve made for a long drive haha
Great video, love how you explained how to secure the last vehicle, I was not utilizing those two hooks to secure to the stinger. This is like tip 3 or 4 that will make me a better operator. By the way how did the tow go, any damage to any of the trucks, I’m always leery on how close I can get to the wrecker/flatbed. Keep it up great job.
Glad my videos helped you!
It was smooth sailing. No damage.
Is Dustin awesome or what?! I agree this is one of the best channels on youtube.
one of my scariest tows was when a buddy asked me to use my car dolly to get his truck home ....during a freezing rain alert....the roads were awful.....so i took the chance because its a friend and when we get to the truck i notice he failed to mention the fully loaded utility trailer that was attached to it...when i complain about it he says "well you never would have helped if i told you that"....we got it home safely (and slowly) but i tell ya i never trusted that guy again...never helped him again either
One of the best Chanel’s on UA-cam. Great content Dustin!
Don’t miss a video. Your the best ❤
Another educational video Dustin. Too bad you couldn't put a couple 4x4s under the rear wheels of the truck on the bed to get a little more clarance for turning. I was hoping to see how tight you could turn with the setup you had.
Safe journeys!
I wouldn’t trust blocking it up. The wheels still rock a little, and would probably kick the blocks and make all the straps loose.
@@Towtruck_DustinUnderstood, how was your turning radius
Nice job. One question: Except for a longer overall length of the tow. Why not put the shorter truck on the bed, and the longer truck on the wheel lift?
Turns would be hard to do
The back of the truck bumper is hanging off a little bit
The trucks bumper is hanging off a little bit
i always put the shorter car on the life because if its the longer one it makes it longer. lol
Love your videos. Always interested in watching whatever video you want to put out here. Stay Safe.
Another great video. Sorry what happened to your camera.
Awesome video as always man
شكرا داستن
شغل متقن
هناك الكثيرو ن يحبون الاستفادة من طريقتك في العمل
Another great video, Dustin.
All way a great video thanks Dustin
Say out of curiosity what editing tool do you use for these video's?
Apple Final Cut Pro, on Mac.
All your videos are great! Very informative 😊 If you make it, I'll watch it! 👍
You learned me the bungee on the safety chain trick! Thank you, sir. Genius!
i have never used my bungees. lol
Great video! Thank you for sharing 👌 😊
Good Sunday afternoon Dustin!
Nice video!
cool video dustin❤❤❤❤❤❤
When I used to broke down a lot, I get excited to see how a tie trucks work.
Oh yes Dustin if you have time that would be an interesting video how it all works before my health got to bad I actually wanted to get into the business but I don't believe with seizures it'd be safe lol but a how to video would be awesome when you have time 😊
You didn't see your 🎥 down the first time checking the back.
Nice info video.👍
I would like to see a video on how to operate a roll back.
I’d like to see that video! Also maybe a video on how to use snatch blocks and do recoveries
Great video
do you think you can use the things they use for alighnments to hold the steering wheel?
Ya need a bumper on your camera..
make sure on the car on the lift has the parking brake off. he didnt mention that. lol
Why? If anything you’d want it set to take stress off the transmission while it bounces back and fourth.
@Towtruck_Dustin because if it’s on your just dragging it. The wheels won’t turn freely.
I would love to see a video explaining more.
Love it!!
Awesome video. 👌
That would be great to see everything you have to do at work
Way cool thanks 👍👍🎄
What a shame, I would have loved to see you take to the road with both vehicles....
Tie some fishing weights to legs of tripod
They do this a lot in the salvage industry.
that was interesting.. sorry your camera got broken but it really didn't affect the video.. was still good..
Great job
A great job
those solid axle fords have some of the strangest front frame points
Yeah that would be good to see
Man, those trucks have seen some things.
At least the trucks aren't smashed to pieces, and you have the keys. Also, you don't have to hook up in traffic.
Yes
show us how to drive with it loaded and how to reserve with the double load please!!!! i been double loading a lot recently!!!
What is the tattoo on your left arm of that's the second or third time now I've seen that tattoo on a UA-cam channel can't quite get a look at it
Left arm tattoo drag lights. He does drag race for his off day.
Hi Dustin from New Zealand, love your vids. Curious do you haul much, or any machinery as in excavators, bull dozers agriculture machines.if so, would like to see securement on those. Thanks and cheers.
a how too video would be great
Very educational video just goes to show everyone you have to have common sense not necessarily a college degree degree
For more clearance you could to from front, however, I know you'd have to pull drive shaft. Would you have to pull drive shaft if 4wd and you put transfer case in neutral?
Correct not worth all the work.
I swear these are paid bot comments
I absolutely hate using my wheel lift. I live in a city that was built up before cars existed. The roads are too narrow, the corners are too sharp, and half the streets around here are still cobblestone.😮
Excelente video saludos Bendiciones 💪👍
Excelente video saludos Bendiciones 💪👍🇺🇲
My Brother drives a roll back for Harris County Toll Road. His patrol is usually South Sam
My Brother-In-Law lives in Richwood Tx
Wow it didn't even look like the camera was all that high off the ground when it fell! Jeez sorry about the camera!
What would you do if you couldn't set it up to tow that way?
I'm guessing two trips.
How would you not be able to 😂😂😂😂
Wouldn't mind seeing a how to video. What ever company that is they torture the insides of them pickups. How is the steering wheel looking they way it looks...sheesh.
Maybe I missed it, but why didn't the construction company just drive these vehicles to the new work site?
I wood love to see that video and I hope you are doing well
What happened to the people don't come and get the vehicles do you sell them
At least they aren't wrecked, stolen, broken, chased, burned, flipped, or flooded. Looking at the interior, it looks like the owner got their money's worth out of them.
That transport reminds me of the problem the computer scientists use to demonstrate why a quantum computer would change the world. They select 30 or so cities, and ask today's fastest computer to determining the shortest route to connect all the cities without visiting any more than once. It doesn't sound that hard does it, but no computer today can handle the number of possible routes. They claim that today's machines could work on the problem for thousands of years, and still not solve it. Yet they say that a functioning quantum computer could solve the problem in minutes. That is why they are spending billions in the USA & China trying to build one. They say that it would be the greatest invention since the wheel! Instead of trial and error drug development, they could design drug molecules to target different diseases, and maybe even cure cancer.
👍✌
who drove them got sand paper palms?
30 min on 2 vehicles that run?? FIRED
Says the one in the comments section lol
i would’ve been at the drop unloadin by time u pulled off 🤦🏽♂️
Some people are idiots. Yes, you could have done it quicker. Your videos are to show step by step. Great job, Dustin. @Towtruck_Dustin
Its an instructional video. When you don't make your truck payments, I'm sure Dustin will have your ride loaded up and gone in no time!
Where is your videos? Oh wait...all talk 😂
😢why doesn’t this company just have one guy drive two other guys ferry these trucks to where they need to go.
I would've switched the trucks around why take the chance of hitting them
did not understand what is wrong with these trucks?
He tow them straight to junkyard 🤣
👍👍👍
Fords don’t have a control arm they are straight axel that’s a radius arm
You mean a radius arm , an ARM that CONTROLS the radius of the axles ?
@@brucebarnes311are you stupid I said radius arm 🤣🤣
No educational videos, please. Way too much talking. Also it slows you down, making video longer. Your normal narration is just right.
Another great video, thanks Dustin.
Excelente video saludos Bendiciones 💪👍
Excelente video saludos Bendiciones 💪👍🇺🇲
Excelente video saludos Bendiciones 💪👍