Backstage photos and project drawings are now available through Patreon. If you like our projects and you wish to help us make bigger and more extreme projects please feel free to contribute. Link: bit.ly/MIEpatreon
Παιδιά είστε φοβεροί! Μέχρι που είδα τα βιντεάκια σας νόμιζα ότι μόνο στην Αμερική γίνεται τόσο επαγγελματική δουλειά. Χαιρετίσματα από Ηράκλειο Κρήτης!
Nice job! Love this video. I used to work for a mass producer of stock and custom stationary and mobile reservoirs. Kinda reminded me of that time in my life. Miss it at times, but it was definitely hard work. Both physically, and mentally. Used to do non-destructive testing: hydrostatic, air pressure, DPT testing daily. Along with finishing, packaging, and shipping. This type of reservoir would be a hydrostatic test. Flat gaskets on the lid, with holes punched out, secured with 3/8" bolts attached to threaded tabs on the underside through the holes. Other similar tanks never a lip on the top edge. Just gussets in the corners, 1/2" below the top edge. Those tanks had U-Channel gasket and similar lid style. There were a few dozen different types of available for motor mounts, SAE couplings. Some NPT threads, but mostly SAE. All other tanks had 3/4" SAE drains on the tank itself. Very rarely we'd also do british standard fittings. 1 gallon - thousands of gallon pressure & holding reservoirs for all types of industry. Carbon/ Stainless, you name it. We bidded on, and produced some of the nicest tanks for Wajax, Arcelor Mittal, Bosch were some of the most beautiful ones to-date. Arcelor-Mittal had 3 of the biggest tanks we ever did in the 5 years I was there. Thinking about starting my own company doing that exact thing. As I had a supervisory position, it was quite the handle, and bullshit I had to put up with, learned a lot about people, the product for mass production. :D Cheers, thanks for the video Good luck. I look forward to videos of the use of this hydraulic unit! If you need parts, or somewhere to look, or more inspiration, send me a message or find a way to privately contact me, I'll hook you up with some info on a multi-national company for both stationary and mobile sub-systems, and single unit propagation. :D
I am looking for small hydraulic mechanisms for automating locally made hollow brick machines. I realise u can be of help. Any info please get to me through ericwodeya@gmail.com
Ok Guys the next project has to be EXTRA special.. Simply because it is going to be project #0069... The greatest number a man can enjoy over and over and over and over ! LOL Thanks for another great build.. always looking forward to seeing your next project !
Έχετε ενα απο τα καλυτερα κανάλια στο είδος τους, ειμαι συνδρομητής απο πολυ παλιά. Ρε μάγκες ενα παράπονο εχω μόνο, αλλάξτε τη μουσική! Ξερω ειναι εύκολο να βρείτε non copyright ροκιες και να ξεμπερευετε αλλα δεν παλεύετε ρε σεις.. φιλικά πάντα!! Keep making 💪🏼
the music hammers along and i feel pumped, then it gets sad and i think about my life and all what a ride its been, and then music comes back and i start getting fuckin' AMPED again
Every machining shop needs a hydraulic power pack in its arsenal, why do you think the guys will become a hydraulic press channel? Imagine their crafting skills combined with hydraulic power... the best are yet to come!
The Russian built quite many things from scraps with a few manual power tools like angle grinder, welder, sometimes without even a professional drill press with great ideas. This guy’s shop is filled to the roof with all kind of purpose built tools and materials which I guess must be worth of $100K. I like to watch the process but what they make are not extreme anyway.
Ideally, when setting up the suction strainer you want it horizontal and as Low in the tank as possible. That’s the way to get the most out of your oil. Especially if you have several different cylinders/attachments.. each time you disconnect one, quite a bit of oil gets left behind in the cylinder. Having the strainer up like that highly increases chance for cavitation. This isn’t meant to be a smart ass comment, just a heads up for getting the most out of your new machine.
Si me dejas opinar: Así no se construyen los depósitos hidráulicos debido a que el fondo del depósito debe de estar con cierta inclinación para que se puedan decantar los posibles residuos a la parte más baja y así evitar que la bomba lo succione y esto provoque que se pueda depositar más residuos en el filtro o incluso estrangulando el paso de aceite. Por otra parte, es preferible separar con compartimentos la zona de retorno del aceite con la zona de salida (la bomba) para así evitar que el fluido que llega caliente, genere turbulencias con el fluido frío que se encuentra en el depósito y así provoque que se levante la suciedad depositada en el fondo previamente citada, como también el sobrecalentamiento en todo el circuito hidráulico. Para este último problema instalaría un intercambiador de calor. Otra cosa que no me gustó son los latiguillos dentro del depósito ya que si por algún casual se revienta uno tendrías que abrir el deposito para cambiarlo. Y antes de la válvula 4/2 pondría una válvula 3/2 N.A. monoestable con seta enclavada a modo de seguridad, y una llave de paso que te permitiría dejar con presión una línea que te sirve por ejemplo para comprobar fugas en un cilindro hidráulico. Pero debido a que es un depósito (supongo) que para probar cilindros hidráulicos u operaciones sencillas, el grupo está de 10, la verdad. Si fuese para una máquina me decantaría por un grupo comercial ya que estamos hablando de circuitos hidráulicos que están sometidos a mucha presión y pueden ser peligrosos. Sin más te doy las gracias por leer mi comentario y si aceptas las críticas pues mucho mejor. Espero que subas más vídeos, no hay nadie en youtube que haga lo que haces tu a este nivel. Mis felicitaciones. Saludos.
Estudié Fabricación Mecánica (Mecanizado) y ahora estudio Grado Superior de programación de la producción en fabricación mecánica (casi 4 años estudiando neumática, hidráulica, automatismos, plc's etc..)
lol49031. Yes I know. Applied Science did. These guys slap things together but the Applied Science is more delicate. That's why I said that I don't think they can make one.
falta integrar un sistema de enfriamiento para el aceite . Seguro que el aceite tendrá mas de 70'c en unas cuantas horas, ***** Felicidades***** tienes gran imaginación y lo haces realidad, y a eso aquí en México les decimos que eres muy CHINGON
Good Day Sir... First of all, Thank you for the a Great sample of how to Make a Hydraulic pump.... By the way Sir.., I'm Paulo from Philippines A new follower and Subscriber of your Channel. I.m hoping that you make more vedio about of hydraulic system.. Sir I have A question Can you share to me they all parts to make that hydraulic System.. Again Sir thank you and I hope that You will read and answer my comment.. God bless you.....
Good job man. Which kind of hydraulic pump and electromotor is ok for the 10-ton press. It's for a 2mm thickness metal sheet punching machine. Thank you
Great video and project. I did not read through all the comments, so it might have already been said, but is that motor designed and rated to be run in the vertical position like that? I'm asking because MOST motors have plain roller bearings and if run in this position, they'll fail fast. You need tapered roller thrust bearings to support that shaft if you're running it in the vertical position. A quick google search of the model number will tell you all you need to know about running positions. In any case, keep up the great work.
I been watching this channel for some time now.. and love that you post the plans to the projects. But this plan is not up... and i am truly interested in this particular hydraulic pump. Where can i get the plans to the project? Thanks
Awesome video. If you guys really want to make something extreme build the cargo robot from Aliens 2 it's whole movement capabilities are all hydraulic function. Thank you for all your videos.
Idea for a project: a large, PID-controlled oven so you can stop using a rattle-can and start powder-coating your projects for a more durable and consistent finish.
I have a question: Most people who 'construct' equipment use paint spray cans to paint parts instead of an air compressor and pistol. Is it because it is less laborious or is it because the spray cans are cheap?
![How to make a hydraulic cylinder [ DIY ] * Subtitles *](http://i.ytimg.com/vi/T_36mR8bN5M/mqdefault.jpg)
Backstage photos and project drawings are now available through Patreon. If you like our projects and you wish to help us make bigger and more extreme projects please feel free to contribute. Link: bit.ly/MIEpatreon
Make it Extreme พี่ชื่ออะไรครับ
I ThaiLand
Make it Extreme guys you are in Cyprus ?
pafos actually !
Paphos? Ha! I was there. Cyprus has great food, OMG! So good!
People making coffee tables with plywood, and then this guys blow the maker community with all kinds of prototypes. Pure skills.
Παιδιά είστε φοβεροί!
Μέχρι που είδα τα βιντεάκια σας νόμιζα ότι μόνο στην Αμερική γίνεται τόσο επαγγελματική δουλειά.
Χαιρετίσματα από Ηράκλειο Κρήτης!
Dudes! You are inspector gadgets! ✌️ very impressive!
Awesome! Looks like you are on your way to a homemade Bulldozer.
Why not.
Μπραβο ρε μαγκες.Για ολα.Σχεδιαση ,κατασκευη,ληψεις,μονταζ ακομα και μουσικη.Συνεχιστε!
Nice job! Love this video. I used to work for a mass producer of stock and custom stationary and mobile reservoirs. Kinda reminded me of that time in my life. Miss it at times, but it was definitely hard work. Both physically, and mentally.
Used to do non-destructive testing: hydrostatic, air pressure, DPT testing daily. Along with finishing, packaging, and shipping.
This type of reservoir would be a hydrostatic test. Flat gaskets on the lid, with holes punched out, secured with 3/8" bolts attached to threaded tabs on the underside through the holes.
Other similar tanks never a lip on the top edge. Just gussets in the corners, 1/2" below the top edge. Those tanks had U-Channel gasket and similar lid style. There were a few dozen different types of available for motor mounts, SAE couplings. Some NPT threads, but mostly SAE. All other tanks had 3/4" SAE drains on the tank itself. Very rarely we'd also do british standard fittings.
1 gallon - thousands of gallon pressure & holding reservoirs for all types of industry. Carbon/ Stainless, you name it.
We bidded on, and produced some of the nicest tanks for Wajax, Arcelor Mittal, Bosch were some of the most beautiful ones to-date. Arcelor-Mittal had 3 of the biggest tanks we ever did in the 5 years I was there.
Thinking about starting my own company doing that exact thing. As I had a supervisory position, it was quite the handle, and bullshit I had to put up with, learned a lot about people, the product for mass production. :D
Cheers, thanks for the video
Good luck. I look forward to videos of the use of this hydraulic unit!
If you need parts, or somewhere to look, or more inspiration, send me a message or find a way to privately contact me, I'll hook you up with some info on a multi-national company for both stationary and mobile sub-systems, and single unit propagation. :D
I am looking for small hydraulic mechanisms for automating locally made hollow brick machines. I realise u can be of help. Any info please get to me through ericwodeya@gmail.com
ua-cam.com/video/2nlxJ3k41Ms/v-deo.html this link gave me the inspiration.
Ok Guys the next project has to be EXTRA special.. Simply because it is going to be project #0069... The greatest number a man can enjoy over and over and over and over ! LOL Thanks for another great build.. always looking forward to seeing your next project !
Best DIY channel on UA-cam!
This is exactly what I’m trying to make, and finally found a video as a starting point.
τι να πω ρε παληκαρια σας παρακολουθω τοσο καιρο ειλικρινα το εχετε παει το αθλημα αλλο επιπεδο.ΜΠΡΑΒΟ
Another great build guys. I like that you kept the hydraulic motor in the oil.
Minor improvements can make this unit better, great job ,👏
Έχετε ενα απο τα καλυτερα κανάλια στο είδος τους, ειμαι συνδρομητής απο πολυ παλιά. Ρε μάγκες ενα παράπονο εχω μόνο, αλλάξτε τη μουσική! Ξερω ειναι εύκολο να βρείτε non copyright ροκιες και να ξεμπερευετε αλλα δεν παλεύετε ρε σεις.. φιλικά πάντα!! Keep making 💪🏼
the music hammers along and i feel pumped, then it gets sad and i think about my life and all what a ride its been, and then music comes back and i start getting fuckin' AMPED again
that was insane great work guys !!
Yeah 💯
Your channel is just next level man. Incredible what you guys can do.
aintgonnahappen 7yhtuc
aintgonnahappen 3yrfug
Son verdaderos reyes!!! Gracias por aportar siempre sus trabajos y inspirar a crear cosas nuevas. Saludos desde Argentina
Awesome man! Eres una maquina
"and velcomm to the hydraulic press channell!"
VAT DA FOK?
Every machining shop needs a hydraulic power pack in its arsenal, why do you think the guys will become a hydraulic press channel? Imagine their crafting skills combined with hydraulic power... the best are yet to come!
I think it can attack at any time
petrosant123 sense of humooooor
Some people like Nuovo call it irony :D
Awesome workmanship.
Many materials are very useful.
The Russian built quite many things from scraps with a few manual power tools like angle grinder, welder, sometimes without even a professional drill press with great ideas. This guy’s shop is filled to the roof with all kind of purpose built tools and materials which I guess must be worth of $100K. I like to watch the process but what they make are not extreme anyway.
you are extreme engineer...great works...
Very professional looking!
I love your creativity
What are the usual settings you use when welding and will you show your welding techniques some time? Your videos are always a must watch for me.
Nice work. An essential tool for a serious machinest. I hope I have the plan.
sauber und perfekt gearbeitet.KLASSE!! Könnte man auch Holzspalter verwenden?!
Is there anything you guys can't do? I love this channel!!!
Clever and of course very well made project guys! There is no limit for you! Congrats and thank for the treat!!!
Oh boy another video, can't wait to see what's next!
Ideally, when setting up the suction strainer you want it horizontal and as Low in the tank as possible.
That’s the way to get the most out of your oil. Especially if you have several different cylinders/attachments.. each time you disconnect one, quite a bit of oil gets left behind in the cylinder. Having the strainer up like that highly increases chance for cavitation.
This isn’t meant to be a smart ass comment, just a heads up for getting the most out of your new machine.
So what are they going to do with that piston?
Yay they did built a hydraulic pump! I sense a press coming up next! :D
😍😍wow!! Very professional !
Brilliant as always.
I love the videos. I love the channel. Keep up the great work guys!!! 👍👍👍👍
You are the best , congratulations from Lima - Perú
It takes me first few seconds to subscribe
Si me dejas opinar:
Así no se construyen los depósitos hidráulicos debido a que el fondo del depósito debe de estar con cierta inclinación para que se puedan decantar los posibles residuos a la parte más baja y así evitar que la bomba lo succione y esto provoque que se pueda depositar más residuos en el filtro o incluso estrangulando el paso de aceite.
Por otra parte, es preferible separar con compartimentos la zona de retorno del aceite con la zona de salida (la bomba) para así evitar que el fluido que llega caliente, genere turbulencias con el fluido frío que se encuentra en el depósito y así provoque que se levante la suciedad depositada en el fondo previamente citada, como también el sobrecalentamiento en todo el circuito hidráulico.
Para este último problema instalaría un intercambiador de calor.
Otra cosa que no me gustó son los latiguillos dentro del depósito ya que si por algún casual se revienta uno tendrías que abrir el deposito para cambiarlo.
Y antes de la válvula 4/2 pondría una válvula 3/2 N.A. monoestable con seta enclavada a modo de seguridad, y una llave de paso que te permitiría dejar con presión una línea que te sirve por ejemplo para comprobar fugas en un cilindro hidráulico.
Pero debido a que es un depósito (supongo) que para probar cilindros hidráulicos u operaciones sencillas, el grupo está de 10, la verdad. Si fuese para una máquina me decantaría por un grupo comercial ya que estamos hablando de circuitos hidráulicos que están sometidos a mucha presión y pueden ser peligrosos.
Sin más te doy las gracias por leer mi comentario y si aceptas las críticas pues mucho mejor.
Espero que subas más vídeos, no hay nadie en youtube que haga lo que haces tu a este nivel. Mis felicitaciones.
Saludos.
Buen y sincero análisis. De todas maneras, junto con Colin Furze estos tíos son de lo mejor de la comunidad maker en youtube.
Gracias
Sergio Lastra te falto poner, lose porque estudié mantenimiento electro mecánico y las clases de neumatica e hidráulica me gustaban mucho 😮
Estudié Fabricación Mecánica (Mecanizado) y ahora estudio Grado Superior de programación de la producción en fabricación mecánica (casi 4 años estudiando neumática, hidráulica, automatismos, plc's etc..)
Sergio Lastra por cierto es una válvula 4/3 no una 4/2
You did the hydraulic power pack, I hope you do a press, tubing bender, metal shear, hole punch and so on now.....
because he is the best DIY mechanic.
do a waterjet cutter
Yes! Too delicate and complicated though. I don't think they can make it.
Da L. someone made one from a pressure washer so im sure they could do a more heavy duty one
Applied Science just made one.
Hey now, applied science is cool but I wouldn't call make it extreme a clown. He has done some pretty cool projects.
lol49031. Yes I know. Applied Science did. These guys slap things together but the Applied Science is more delicate. That's why I said that I don't think they can make one.
One of your most professional looking creations to date. Great job, guys!
Замечательная работа. Всех благ.
Another great green machine!
Beautiful design
You guys are so amazing and talented ♥️♥️♥️
falta integrar un sistema de enfriamiento para el aceite . Seguro que el aceite tendrá mas de 70'c en unas cuantas horas, *****
Felicidades***** tienes gran imaginación y lo haces realidad, y a eso aquí en México les decimos que eres muy CHINGON
nice exlent video .i love you hydrolick work.
Beautiful power pack project of course!! As always, Thanks for another great upload!!!!!!
Good Day Sir...
First of all, Thank you for the a Great sample of how to Make a Hydraulic pump....
By the way Sir.., I'm Paulo from Philippines A new follower and Subscriber of your Channel. I.m hoping that you make more vedio about of hydraulic system..
Sir I have A question Can you share to me they all parts to make that hydraulic System..
Again Sir thank you and I hope that You will read and answer my comment..
God bless you.....
Neat little HPU.
You all so wise ever. Master of hydraulic👍 🙏
You make awesome videos
The only thing better than your videos is your videos at 0.25 speed ;)
great job , but the painting whit spray how much is durable in time?
Horizontal Press is coming, I can feel it!
Thank you very much, Professor.
when you were drilling the holes in the metal, what fluid was it that you sprayed on? i know the purpose but not the fluid....
Hockey Videos
Emulsion. Probably water and oil.
Water soluble oil me thinks.
Sam Sorensen ok thanks👍
This guys talented boy!
Good job man. Which kind of hydraulic pump and electromotor is ok for the 10-ton press. It's for a 2mm thickness metal sheet punching machine.
Thank you
Only 400k subs? Designth9 such clever inventions salvage/used high quality bits where needed. Great show c 8th
Great video and project.
I did not read through all the comments, so it might have already been said, but is that motor designed and rated to be run in the vertical position like that?
I'm asking because MOST motors have plain roller bearings and if run in this position, they'll fail fast. You need tapered roller thrust bearings to support that shaft if you're running it in the vertical position. A quick google search of the model number will tell you all you need to know about running positions.
In any case, keep up the great work.
I been watching this channel for some time now.. and love that you post the plans to the projects. But this plan is not up... and i am truly interested in this particular hydraulic pump.
Where can i get the plans to the project?
Thanks
Wow you can make everything! Awesome!👍
Nice video, probably a hydraulic tubing from the pump discharge port?
Thanks for the great channel!!
Nice productions...really .my all respect to you...happy new you my friend...
excellent work
wooo out of my words u made it quick
So awesome, you can make a kickass wood splitter
Awesome video. If you guys really want to make something extreme build the cargo robot from Aliens 2 it's whole movement capabilities are all hydraulic function. Thank you for all your videos.
great...great work...!!!! usefull...for me....!! Thanks Make it extreme...!!!
Nice!
Next step: a mini backhoe!
Love this one. Tempted to try this myself.
good afternoon friends! Very interesting to use your semi-automatic welding machine! thank you in advance
Great work I love it thanks
hey make it extreme it would be really good to see u make a water jet cutter
Thank you very much, good job
Good job Friend 😘
Idea for a project: a large, PID-controlled oven so you can stop using a rattle-can and start powder-coating your projects for a more durable and consistent finish.
What a good video
excellent idea
μπράβο παιδιά! Πολύ ωραίο! χρησιμοποιήστε το κατάλληλα τωρα.....
Bonjour, comment faire pour acheter juste les plans pour la fabrication du groupe hydraulique.?
Merci beaucoup.
nice work mate look forward to see where you use it
i love this guys work. inspired me to start welding.
very very good, spain
please mention what is the welding machine specifications that you are using
Super neat, excellent as usual!!
how many tons of design did you make ??
The best always good job man
What horsepower is used?
now AvE should be interested...
Felix Dietz looks pretty scoocum
it's full of shmoooo
Will it chooch
Bob's your auntie
Hell yeah, it's Hydruwlic after all.
nice work
I have a question: Most people who 'construct' equipment use paint spray cans to paint parts instead of an air compressor and pistol. Is it because it is less laborious or is it because the spray cans are cheap?
man, youre good!! f** awesome. so if you can tell me. do you paint inside the oil tank? or no need it?
@make it extreme ..have you tried to make a hydraulic power pack for a Hydraulic car winch??