Audi A4 B8 8K, A5 8T Rear Bumper and Tail light Removal
Вставка
- Опубліковано 12 вер 2024
- Quick tutorial on how to remove the rear bumper since there are no other videos available for it. Tutorial also valid for 2007 A5 8T.
Video quality is quite grainy due to low light conditions towards the end of the day. Sorry for the poor audio.
List of screws/clips:
- 3 torx rear wheelwell
- 3 torx underside of bumper
- 1 'plastic headed' screw behind taillight inside boot, upper
- 1 nut behind taillight inside boot, lower
- 1 pin holding final 2 clips of bumper inside light housing
- unclip the clip that was held by the pin in previous step
Just popping in to say thank you very much for posting this video. It really helped me when taking the rear bumper off my A4 B8.5 Allroad. There's an extra trim clip above the three wheel arch screws to take off on mine. I was scared sh!tless pulling the bumper away from the wheel arch on mine, it didn't want to budge 😳. A bit of care, brute force and trust in the process got it done 🙂. Thanks again, couldn't have done it without your vid 👍
Glad it helped. Yep, you gotta use plenty of force to pop the bumper off. If its your first time you’ll be worried about breaking something but you just gotta carefully use force
Thanks bro! A few videos i watched previously didnt show close ups, have any commentary or even tips/explanations. I can now remove my bumper comfortably after watching your video. 👊🏼😎
Glad I could help🙌
the best video on A4 Avant rear bumper removal
just a little update on my comment yesterday, the removal on an A5 is identical, screws and nuts in the same place 👍
Rich H Yep, the exterior parts and panels have mostly the same fitting. Glad the video helped ya sort it
TOP TIP: Use a Mono Block bathroom tap spanner ( long socket ) to get at those long threaded bumper bolts cheap tool but indispensable
Solid tip, thanks!
Amazing tutorial!
Awesome video!! Really helpful
My job for tomorrow on my A5 , very helpful video. Thank you.
Jon Smiff Welcome, let us know how you get on.
Good video well explained
Legend! Thank you so much for this vid :)
Welcome!
Thanks, very helpful , will have a go at removing in next few days
Welcome! Good luck
Thanks for video.
this video has really helped me identify an annoying noise in the rear, both nuts are missing on the partially treaded bolts that hold the bumped on for some reason. Any idea what size they are or what part number?
Sam Bachellier The single nut on either side of the rear of the tail lights you mean, right?
I'm not sure what size they exactly are, but from memory, they should be between a size M4 to an M6 nut.
Glad the video helped.
thanks for this video, I have same problem with my b8 a5 (sensor keeps slipping inside) and I imagine they will be similar method for removal.
Good stuff, should be able to manage it, did you manage to relocate the side of the bumper easily with everything lining up ?
Ian Spencer Yep. It lined up nicely and clicked into place with no issues. Probably the easiest one i've done to go back on without any issues.
Hi there - fantastic video - I have an A4 Avant (estate, 2009) that I need to change the bumper for - will your video help with that model?
rumjon Hi, thanks. I'm not entirely sure, I've not done an avant before but I'm hopeful a lot of the fixings should be pretty similar. You're probably best off checking on some forums beforehand, anyway. Cheers