Bro u need the cleaner to get the factory oil off the surface of the rotor so your pads don’t just slide on the rotor.. it’s nothing about actually cleaning them it just getting the machine oil off 😂😂😂
Чистят не от грязи, а от консервационной смазки. Ибо если вы купите любые нормальные диски, а не самый дешёвый китайский хлам, то они будут в смазке в упаковке
God bless the last guy who did my brakes. Hubs cleaned and anti-sieze brushed on. Of course, I did the same. Makes it so much easier for the next dude that's doing the job. Probably me again.
The little bit of oil of brake dust transferring from the glove really doesn't matter compared to the grease they sit in when shipped to us. Trust your technicians 👉
I change my gloves if i used an anti-seize compound with them. But a little dust or dirt is fine. You just want to get the packing oil off the rotor. Them rotors will get dirtier after 15 minutes of driving anyway.
It doesn't even matter I'm done a couple thousand sets of rotors and never once clean them off. The first time you hit the brakes that burns off instantly
Most shops including mine will clean em off because the moment a customer smells that gross burning smell they come right back. Lets just skip that all together 😅@soulsnatcher9228
“Hey everyone! If you appreciate the content and want to contribute, look for the ‘Thanks’ button below this video, and click on it. Your support helps me keep creating videos. Thank you!” 🙌🎥
The oil put on the rotor to protect them from rusting will impregnate the brake pads, causing them to be less effective. Not a huge deal. Manufacturers put it on there for aesthetical reasons only, serves no purposeas the rotors will rust immediately after cleaning anyway. Stupid imo.@MrHanichak2
First thing first you clean new rotor with soap and water and you see dose rust dots and the hub needs to be cleaned with a small wire brush and put the one or three screws back on to hold the rotor in place there’s nothing wrong with doing this job right 😊
You could've done that when you take the rotor out of the plastic before putting it on the hub. Extra work for nothing. He could've been putting the wheel on instead of cleaning the rotor
Потом этот очиститель вбивают в чек хозяина машины . мне делали автомобиль на сервисе 5 баллонов по 300 рублей приписали хотя это было вообще не обязательно использовать .
Zanim się przykręci tarcze ,trzeba jeszcze wyczyścić piastę na styku z tarczą ,jeśli się tego nie zrobi to podczas jazdy będą drgania na kierownicy podczas jazdy .Pozdrawiam 👍
No there wont.......... I've never cleaned the hub of grease, only the surface that makes contact with the pads. The grease isn't dense enough nor is there enough to cause an uneven surface when bolting the wheels back on
How about you clean that hub service before slapping that rotor on…hint…prevents runout if you clean all that rust build up and your customer doesn’t have to return 6,000 miles later saying there is a vibration when braking.
That's a great trick! No more holding them with my teeth while i clean them.
🤣🤣🤣
Dang, that's smart! I've been using my "cheeks" 😅
A czemu piasta nie wyczyszczona ?
@@krzysztofcarservice5915 Ponieważ moja żona jest leniwa.
@@wormturned7379 Which ones?
So he sprays the rotor on both sides with brake clean and then proceeds to wipe it off with what appears to be a dirty oily rag. Absolutely brilliant!
Aaaand… wiped off right immediately after. What’s the point?
Who needs a clean rotor anyway? Adds character to the car, right?
It's like putting on makeup only to wear a face mask! 😄
@@AxtuoAxwhat lol
Bro u need the cleaner to get the factory oil off the surface of the rotor so your pads don’t just slide on the rotor.. it’s nothing about actually cleaning them it just getting the machine oil off 😂😂😂
Я бы перед установкой посадочное место прочистил, чтобы исключить биение диска.
Это истина, это нужно знать!
Затооооо он обезжирил диск )))
И смазки немного под диск
😂@@17...62
Как мы раньше без этого жили ??? Вся эта хрень до первой лужи!😂😂😂😂
Вся эта хрень называется масло которым покрывают диски дабы они не соржавели
Чистят не от грязи, а от консервационной смазки. Ибо если вы купите любые нормальные диски, а не самый дешёвый китайский хлам, то они будут в смазке в упаковке
@@evgenka8865 В смазке будет последнее гавно ! Нормальные диски от АТЕ идут чистыми и с покрытием от ржавчины ! Тундра !
Who knew that "вся эта хрень" could actually be useful? 😄
Looks like we're all in need of a good cleaning, whether it's dirt or conservational grease!
Make sure you soak all brake parts in marvel mystery oil overnight for maximum cleanliness
I hope my brakes don't mysteriously disappear after soaking them in that oil!
@@AxtuoAx 🤣🤣🤣
It's been 30+ years and I still use Ajax and warm water to clean new rotors. Old schooler taught me years ago.
Me too...
Just broke
...and smart.
Даа, немного масла на диске обязательно надо почистить, а на ступицу пхую в принципе, ни смазывать, ни чистить не надо
Thank you for watching and I'm happy it could assist you!
Your support means the world to me
What about hub?
the hub must be ground , not rusty
God bless the last guy who did my brakes. Hubs cleaned and anti-sieze brushed on. Of course, I did the same. Makes it so much easier for the next dude that's doing the job. Probably me again.
Maybe give your hub a spa day and a good polish!
Cleans disk from oil and grease. Uses his oily and greasy hands to turn it around, touches the cleaned surface. Wow. 😂
The little bit of oil of brake dust transferring from the glove really doesn't matter compared to the grease they sit in when shipped to us. Trust your technicians 👉
I change my gloves if i used an anti-seize compound with them. But a little dust or dirt is fine. You just want to get the packing oil off the rotor. Them rotors will get dirtier after 15 minutes of driving anyway.
It doesn't even matter I'm done a couple thousand sets of rotors and never once clean them off. The first time you hit the brakes that burns off instantly
Most shops including mine will clean em off because the moment a customer smells that gross burning smell they come right back. Lets just skip that all together 😅@soulsnatcher9228
Maybe the hands were just trying to contribute to the cleaning process!
I’ve never cleaned rotors bunch of bull after one hard stop it burns off anyways 😂😂😂
Sounds like your rotors are self-cleaning! Who needs maintenance, right?
Give this man a beer.
Real men of genious
Why?
I wish I could virtually hand you a beer right now!
Ah, the eternal question of "why?" Let's ponder the mysteries of the universe together!
He used the whole can to clean one rotor 😂😂😂
Well, that's one way to make sure it's squeaky clean!
@@AxtuoAx True
Нанести очиститель на ветошь и протереть, тогда расход будет сильно меньше, чем при поливе.
That is my method.
Who knew cleaning could be so efficient and cost-effective? I might start using this method for everything!
Saves me a trip to the local car wash. Thanks
“Hey everyone! If you appreciate the content and want to contribute, look for the ‘Thanks’ button below this video, and click on it. Your support helps me keep creating videos. Thank you!” 🙌🎥
You didn’t clean the mating surface
Rotors are new with light oil to prevent rust clean so it wont smoke and smell at first
Looks like the rotors are just getting warmed up for their performance, no need to panic!
Total waste of brake cleaner.
😂
It ain't Pappy Van Winkle, relax.
Maybe I should stick to DIYs that don't involve brake cleaner next time!
Who needs Pappy Van Winkle when you've got my content, right?
rotors have oil on them to prevent rust I'm pretty sure that's what he is cleaning
Cosmeline shit is awful
If you don’t clean the cosmeline off the brakes will smell horrible for a few days
So, should I start using oil as a skincare routine to prevent rust too?
Maybe it's an acquired taste, like a fine wine... but in this case, not so fine!
Who needs air fresheners in the car when you have cosmeline-scented brakes, right?
What happens if you forget to do this and still put on new brakes?
Brake pads' linen contamination
@@AxtuoAx and if you didn't speak car, what does that mean?? 🤔
The oil put on the rotor to protect them from rusting will impregnate the brake pads, causing them to be less effective. Not a huge deal. Manufacturers put it on there for aesthetical reasons only, serves no purposeas the rotors will rust immediately after cleaning anyway. Stupid imo.@MrHanichak2
Салидолом нужно смазать калодки
Смысл. Один раз тормознули и гут
I hope the brakes don't start smelling like menthol!
I've done brake jobs for 40 plus years never sprayed anything on them worked fine
Maybe you're secretly a brake whisperer!
I use Mr Clean multi surface cleaner, the kind you can use on “multi surfaces!” that way you clean off bacteria too, duh!
Mr. Clean to the rescue! Say goodbye to bacteria and hello to sparkling surfaces!
THATS WRIGHT.
Once new rotors are clean and in place, install the new brake pads as per the manufacturer’s instructions. 😁
Just remember, the brake pads go on the wheels, not on your sandwich!
Using a red rag causing more contamination, brilliance at work
Those r absolutely fine for those brakes my guy. -diesel tech that uses red rags-
Who knew a red rag could cause so much chaos? Maybe I should switch to blue!
How else would i clean them?
Have you tried giving them a spa day? Maybe a bubble bath would do the trick!
Лучше бы ты зачистил ступицу от ржавчины, чем смывал транспортировочное масло с диска
Maybe I should start a "Car Maintenance 101" series on my channel!
Don't forget the mating surface you're putting the rota on..!! 😊
I am confused. I always put a light coat of marine grease to prevent rust so the brakes to get stuck
Maybe your brakes are just enjoying the marine life too much and don't want to leave the ocean behind!
For bimmer guys place rottor face down on floor, clean back side place rottor on car and clean the front side
So, are we cleaning rotors or summoning car spirits with this ritual? 😄
That’s going to be a wobbly brake CLEAN THE HUBS
Looks like my brakes are getting a little wobbly, time to give them a spa day!
I only use WD-40 to clean my brake pads and rotors 😊
WD-40, the solution to everything! Who needs brake cleaner, right?
@@AxtuoAx lmao 🤣
Totally wrong ....new disks have a kind of wax-layer in order to help new brake-pads getting smoothly shaped in form by first using ...
Its cosmoline. It's just an anti rusting agent. Guns have the same stuff out of the box clean it
So, you're saying my brakes need a spa day with wax treatment?
Seen videos where you are supposed to leave film on. Helps to seat new pads.
So you're saying I should leave the plastic on my brake pads for better performance? Sounds like a slippery situation!
I would always clean them taking them out of the bags and placing them on top of the box and clean them that way , it serves the same purpose
Who knew cleaning could be so organized? You've got a system that's top-notch!
First thing first you clean new rotor with soap and water and you see dose rust dots and the hub needs to be cleaned with a small wire brush and put the one or three screws back on to hold the rotor in place there’s nothing wrong with doing this job right 😊
Who knew cleaning rotors could be such a soap opera?
Nice, finally somebody wearing gloves.
Yup, had to keep those hands warm and stylish!
POV: your boss brings you a new can of brake cleaner.
Is your boss trying to tell you something? Time for a brake cleaner intervention?
Thanks Dude! I always tell my stupid 6 month old newborn to hold them for. This idea is a life saver
Haha, babies can be a handful, right?
Главное чтобы тряпочка чистой была!
As long as the rag is clean, we're good to go!
Hätte er besser > die Auflagefläche gereinigt😢😅😅
Don`t need to clean the disk surface but need to clean hub surface with a wire brush because it looks rusted.
Looks like your car is getting a little rusty, time for a makeover!
I found it to not really matter if you clean them or not.
Well, that's good news for anyone who's not a fan of cleaning!
That is how i do it every time new or resurfaced
Looks like we've got a method to our madness!
Just dip in oil rather than spray it on
So you're saying I should take a dip in oil rather than using a spray bottle? Sounds like a new beauty trend!
Holy crap never thought about that lol😂😂😂
The best realizations come with a side of "holy crap"!
А просто на столе или полу обратную сторону диска не дано очистить?
А если у меня колесо не на шпильках а на болтах?
Maybe the dirt on the backside gives your car extra traction! But seriously, clean it for better performance.
Брак. Посадочное место не почистил. Может при движении бить.
Plot twist: It was WD-40
The ultimate twist - who knew WD-40 could be so versatile?
After that clean the Break disk the place from the Disk
You could've done that when you take the rotor out of the plastic before putting it on the hub. Extra work for nothing. He could've been putting the wheel on instead of cleaning the rotor
2 subscribers??? 😒
I thought he was gonna put it on backwards 😭
Haha, that would have been quite the fashion statement!
I usually paint my caliper when I change my rotor, the cleaner eats thru the paint.
Sounds like your caliper cleaner is a bit too hungry! Maybe it's a secret art critic?
Don't clean the hub very important otherwise vibration will come to you all !
Потом этот очиститель вбивают в чек хозяина машины . мне делали автомобиль на сервисе 5 баллонов по 300 рублей приписали хотя это было вообще не обязательно использовать .
Do You think I used a Lot of brake cleaner in this video?
Bueno como quieras la balata se encarga de limpiar el disco
Well, looks like the balata is on cleaning duty now!
Why didn’t he clean the rest when he pulled it off?
Maybe he was saving the rest for a future video - "Cleaning the Rest: The Sequel"!
Pourquoi il ne met pas un disque avec des trou?
Maybe he's saving the disc with holes for a special occasion!
With an old rag wonderful
Who knew an old rag could be so wonderful, right?
Thats funny, I do the same thing! lol
Looks like we might be long-lost twins separated at birth, haha!
My first thought was that’s backwards
Maybe it's a sign to look at things from a different perspective!
Thanks
Thank you for watching and I'm happy it could assist you!
Hopefully he clean the hub.
Maybe he just wanted to give it a rustic, vintage look!
Good trick
Glad you enjoyed the trick! I have a few more up my sleeve. 😉
Acutally using brakekeen for its inte ded purpose
Who knew brakekeen could be so versatile? Just don't try to use it as a cooking utensil!
👍👍👍
Zanim się przykręci tarcze ,trzeba jeszcze wyczyścić piastę na styku z tarczą ,jeśli się tego nie zrobi to podczas jazdy będą drgania na kierownicy podczas jazdy .Pozdrawiam 👍
No there wont.......... I've never cleaned the hub of grease, only the surface that makes contact with the pads. The grease isn't dense enough nor is there enough to cause an uneven surface when bolting the wheels back on
Are we fixing cars or cooking? Oil on the gasket sounds like a recipe for a smooth ride!
I can tell you had to pay for that brake cleaner
Well, I guess my brakes were too dirty to DIY it this time!
Dam bro you used the whole can
Haha, guilty as charged! Gotta make sure I get every last drop of creativity out of that can.
But you forgot to clean the hub
Oops! I guess I got a little too excited about the other parts. The hub can wait for the sequel!
That rag had more oil than you sprayed off
Maybe I should switch to cleaning rags for the next oil change!
Абсолютно ненужная процедура. Тронулся слегка потом притормозил, и всё.
Well, at least you got a little thrill out of it!
и бронзовую смазку, чтобы диск не прикипел
Did you mean bronze lube or a bronze medal? 😂
Spray name?
Don't worry, it's not a can of silly string!
Done it that way for years
Maybe it's time to shake things up a bit and try something new!
That was the longest possible way to clean a rotor
Sometimes the long route is more entertaining, right?
Forgot to clean the Hub surface
Whoops! Looks like the Hub surface is having a dust party without us!
Flat rate has left the chat…
Looks like the flat rate couldn't handle the chat!
Да, я тоже перед установкой стараюсь обоссать диск
Looks like the brake cleaner has inspired some creative prep work!
Let me wipe my butt before I poop ..okay im done pooping.. okay let me use the same toilet paper to wipe my butt okay done 😂😅
Efficiency at its finest! 😂
So clean then get dirty again, got it.
It's like doing laundry, but with your soul.
Uhh, rotors do not need to be cleaned.
I just open the box they came in a spray them down
Nothing like a good ol' spray-down to welcome your new items to the family!
На ржавую ступицу 👍👍 самое то😅
Are we talking about rusty hubcaps here? 😄
Не забудь колодки солидолом намазать.
Acaso eso tiene que ser puesto,no puede ser afuera
Why did he pick up the rotor with his dirty gloves in the first place?
Maybe he thought the rotor needed a little extra grease for good luck!
Unless you don’t have studs like my Mercedes
Well, I guess I need to upgrade my car to get some studs like yours!
lol. Made me feel stupid simple tricks. Lol
Haha, don't feel stupid! We all have those moments. Just laugh it off and keep learning.
This is not new. Technique has been around for over 40 years.
Dawn soap and water is better
Yo creo que el trapo esta mas sucio que el disco😂
Maybe it's time to switch to a new cleaning method!
Oh yea that’s clearly clean
Clearly clean like my room after I've procrastinated for weeks!
It would be great to use a fresh clean rag to do the job correctly. Not an old greasy Rag!😅
Don't want any old greasy rags ruining the party! Fresh and clean all the way.
How about you clean that hub service before slapping that rotor on…hint…prevents runout if you clean all that rust build up and your customer doesn’t have to return 6,000 miles later saying there is a vibration when braking.
Maybe I should start a car maintenance channel next! Thanks for the tip!
А ступицу почистить не надо?! Главное диск помыть от масла
Who knew cleaning a hubcap could be so controversial?
the easy way= the lazy way
Who said being lazy couldn't be smart?
For some reason I was expecting fire.
Sorry to disappoint! Maybe next time I'll bring the fireworks.
Ать и мимо... Фиксирующие болтики куда крутить?
If in doubt, just give the bolts a good spin and hope for the best!
That Is so time consuming. Just grab it by the middle spray both sides and wipe, then put it on. Loosing money at this point bro.
Time is money, but I'll work on my speed! Thanks for the advice.