How To: Samsung Outer Door Boot Clamp DC97-04973B
Вставка
- Опубліковано 29 сер 2024
- How To Replace: Samsung Outer Door Boot Clamp DC97-04973B www.appliancepa...
Symptoms: Damaged; the door boot seal is coming off the front panel.
Tools: flathead screwdriver, locking pliers.
This Samsung made Washer Outer Door Boot Clamp replaces the following older part numbers on Samsung Washers: 2025747.
Buy the new Washer Outer Door Boot Clamp DC97-04973B here: www.appliancepa...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepa.... We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros
Whoever invented that outer spring needs to get slapped.
That statement is spot on and can be used on so many useless but needed parts😂😂😂😂
Bro just changed the Seal on my washer, no issues until this Bastard.
I am telling you i was one Breath away from taking my Lump Hammer and smashing up my Washing machine, i swore to God if i ever come Face to Face with the twat that invented this spring part i would to unspeakable things to the fucker LOL
You do realise how many people have been helped by these directions? So many stresslevels reduced!❤
Totally. Wondering what other pieces of my washing machine are going to fall out now! At least I know where to look to put they bloody things back in though!
Some guy in a DIY appliance repair Facebook group I’m on says he’s a Samsung repairman. He advised me that before ordering a replacement pump I better be sure I could get the spring clamp off and on again. Told me I’d need a special tool. I almost ordered one, but the tool didn’t look like our would work with our spring, so I looked on UA-cam for a demonstration of the tool. Instead I found your video, and I’m SO GLAD that I did! Went to the garage and grabbed a Flathead and my channel locks and in less than 2 minutes had removed and reinstalled the spring clamp. Guess I can order that pump now!
Glad you were able to find our videos. If there is anything we can help you with at all please let us know.
You took 2 hours of my life and put it into 30 seconds thank you so much!
Omfg are you me?
We’ve been trying for hours to get the retainer back on with no success till we watched your video! You’re a lifesaver!!! Thank you so much!!!! I’ve never been so happy to have my machine back up and running!
We're so glad we could help!
Just what I needed to watch and how he explains how to do it especially as he is a expert on how to do stuff like that on different appliances and I should be able to get the wire back on now instead of using a bit of wire and twisting it to hold it in place but it is always the same thing if you haven't been able to put the correct piece back on then you will be on borrowed time before the leak starts and ends up all over the floor and the dog is drinking the water from the machine with all the cleaning products in and then the dog is barking bubbles for a few days afterwards 😅😅
I was struggling with this for a day and just could not get it back on, went to Home Depot to see if they have a spring expansion tool and they did not, was just about to buy the tool from Amazon for over $100 and then as a last ditch effort I searched on youtube and I came across this video and I have to say that it took me less than 5 minutes to do after following the instructions on this video. Thank you very much.
You're welcome!
Great video. Just sat for an hour trying to put the clamp on and with this technique did it first time. Thank you very much all the way from Newcastle, England
Glad to help!
The best video. I fought that dang thing for 45 minutes. Found this and had everything back together 5 minutes later.
Thanks!!
You're welcome. Glad we could help!
THANK YOU!!! I spent 45 minutes trying to do it myself then I finally looked online and your video helped me!!!!
Thank you for providing the repair videos! This video has saved a great deal of time and money, as the Samsung manual does not show exactly where the spring should be located. Samsung's customer service says that they cannot advise regarding parts and wanted to schedule a service appointment. By visiting your site, I could order a replacement spring clamp and watch a tutorial on how to install it. I'll be referring this site to friends!
+Cheryl A Glad the video helped you get the washer fixed!
Very appreciated. Took 5 minutes after seeing this video.
Thanks a lot.
Fixed the leaking door. 🙏
You're welcome!
This was a lifesaver! I worked with the spring clamp for an hour before finding this. Using this technique it went on first attempt.
Glad the video helped you get the washer fixed!
thanks you saved me some money, it took a lot of concentration to pull this off lol, i used my vise grips and follow your lead and it worked after quite a few tries.
You just saved me $90+! Thank you for this quick and easy method.
You're welcome! Glad we could help you save some money.
Thanks so much for this! What DIYer has a spring expander? An hour trying over and over until I found this - 1 minute and it was on! Lifesaver!
You're welcome! We're always happy to help DIYers like yourself get the job done.
after struggling for more than 2 hours I found your web site, done in 5 minutes!!!!!!!! Thank you so much!!!
You're very welcome!
Thanks for showing the method for putting on the spring clamp!
Glad the video helped you get the washer put back together!
Thank you so much. This really helped me. Lots of frustration failing before I saw this video and sorted now. Appreciated
Watched two other videos..but could not get the retainer ring on to save my life; I must've tried it 30 or more times. Your tip of using vice grips did the trick, first time! Thank you!
Thank you! Bought a Samsung in summer and now the spring thing came off. So annoying. Was full of hope with a decent make of machine, but now less so.
You are welcome. If there is anything we can help you with in the future please let us know.
Thanks, we almost gave up. Using a tool helped a lot. Somehow my towel got twisted around the seal in the door. and the seal got pulled into the machine in a big twist. it just kept going. I heard weird noises so I went to look. Glad I could hit the pause button. The seal ring fell off, but we got everything back in place. Now I’m not sure if I trust the machine to run while I’m away. I hope the drum or motor did not get damaged, whole machine is barely a few months old.
Glad you were able to get everything put back together. If there is anything we can help you with in the future please let us know.
Life saver, THANK YOU!! I had to use the same tool you used to have it work, needle nose pliers DO NOT WORK when pulling the spring.
After trying for an hour, I found your video... THANKS !!!!
You're welcome!
Pay this man! Thank you!
THANK YOU!!! OH MY GOSH after an hr of trying to get this on SO MAD ready to beat my machine I found your video wish I found it sooner. So painless got it on with one try THANK YOU!!
You're welcome!
YES!!!!!!! THANK YOU!!!!!!! Lifesaver!
I too want to thank you for taking the time to do this and I will also now have a website to go to for ordering future parts!
Glad the video helped you out and we look forward to your orders!
This video helped me out twice already! Thank you so much for posting it. Lifesaver!
This video saved me a lot of time!!!Thanks APP
The first few tries, it seemed impossible to fit the ring on. With a bit of perseverance and following your video exactly, i managed to fit it. Thank you!
Ps the spring is at 7 o'clock. Will that be ok?
This was the only video I managed to find that showed how to deal with a stubborn/stiff metal ring, even if it did take 2 people to do seemingly 1 man's job 😂
This video saved me. I was about to lose it with that clamp...thanks
Adam Mullett me, too. Then I searched, found this. Took me about three tries. I found it worked when I put the vice grips about an inch away from the spring, and the key is to really, really, really pull in the same plane as the clamp goes. As soon as you pull even a bit away from the front of the washer, it pops right off.
The vice grips was the absolute key, though, I was trying with needle nose pliers and getting nowhere.
Thanks for these videos, every time I’m stuck on an appliance fix, I know I can find a solution.
You just saved my bacon.
Great pointer--wish I would have watched this 10 min ago! My fingers would have appreciated it.
Glad the video helped you get the washer fixed!
My friend you are a God amongst men
Thank you! That was just the technique we needed to get it back on!
Glad the video helped you get the washer fixed!
I’m running out of profanities to scream when I’m it pops out when it’s like 99.99% on
Were you able to get the clamp back on?
@@appliancepartspros eventually 😂
thank you so much!i loosened mine by mistake when i was just trying to clean it, spent over an hour with a spoon and pliars cursing,hopefully now i wont need a plumber to come rescue me...
Thank you for the video
You are welcome!
Thank you so much. This is exactly what I was looking for!😊
Thanks so much for this. I was really having trouble!
THANK YOU
Thank you!!!
Why does it look soooooo easy when you do it !!!! 45 minutes later and I still can't get it on😭
We offer free technical advice and diagnosis on things that aren't covered in our videos, so we'll be glad to advise you on your repair if you're having trouble. We’re available 7 days a week at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/
Alia White same... :(
😂
Alia White - - ya. Ridiculous. Fought with this for hours. Still not on.
the rubber will not stay on every time I pull it to put it on it come off so the spring doesn't go on
Thanks alot for the help!!!
You are welcome!
Thank you so much, I need to do this and want to surprise my s/o, although he may not be surprised, my dad taught me to be self efficient😇, well hoping it goes as easy as the video....... If not I will be back😂
THANK YOU!!!!! You saved me 80 bucks!
Glad the video helped you get the washer up and running!
Woo hoo!!!!
Thank You
Thank you
Thank you. I was so frustrated getting this part back on, I threatened my washing machine with a violent crowbar death. I'd never do that, but it doesn't need to know that.
You're welcome! Glad it didn't come to that.
Glad to know another use for a crowbar😂😂😂😂😂 Thank you for sharing✌😇
thank you
Our spring must be made of vibranium, because there is no way it expands as easily as the one in this video. Hours of effort and the thing just will not go around the seal without also pulling the seal off. Finally bit the bullet and ordered a $30 spring expander to see if that works. Thanks for the video though...super jealous of that springy spring.
Sooooooo helpful. Thank you!!!
Glad the video helped you get the washer fixed!
thanks, best way ever to install that pesky ring!!!
Ive done this with a tie rip instead. Tightened it and then attached the spring😅
Thank you so much 30 sec and its done 😁
Thank U very much. Mine fell off and I replaced it. At first I didn't even know what it was
The seal on my washer came off, the old Spring Clamp wouldnt work, bought a new one from APP, waiting for it to come in, but im worried because i cant figure out how to have it stay on. Please help.
Even with a spring tool spreader it can be tough, i fought one yesterday and finally got it...
I’d really like to sue the mechanical dufus for 1) creating the need and 2) requiring the tool. Obviously he/she was a cheap flunky that designed it in 15 minutes. Arrrrggghh!
Life saver! Thanks.
omg....thank you so freaking much 2nd try and got it.
Thank you.
Welcome!
Some of the springs aren’t as easy to stretch. Ours was very tight. It took two people to fix and I had to use a flat wooden spoon.
Thank you for the help!!!
I had no trouble getting my loop on. It wasn't tight. I was worried the machine would leak but it seems ok
Thank you!
Thanks friend! Helps a ton!
Glad the video helped you get the washer fixed!
A lot of times the springs come off because of overloading them. The other problem is I think the shocks or springs on the inside get weak. My boss has a Kenmore ( Samsung ) and his spring is always coming off and flooding his downstairs apartment. We have replaced it and it keeps coming off.
Can this stretch then won't go on properly
You saved me Thank you!
You're welcome! We're here to save the day 7 days a week. :)
Tnx
What if you’ve accidentally gotten the rubber out of the place? I can’t get the clamp back in and don’t know how to get the rubber back in
Good video! Thanks!
Glad the video helped you get the washer up and running!
actually, i still didn't setup the washer. This video just gave me confidence to order the parts :) I just received them and will try to install this weekend. Thanks!
MrTarekradi
Hope all goes well!
+AppliancePartsPros installed it. the rings were really hard. I cut my hands 4 times. it got quite bloody. but persisted and got it to work after my daughter helped hold done one side of the ring.
Awesome good to hear you got it done!
Why do I have to do this
at 6:00 oclock?
cheers boss!
Happy to help!
Hey, every time I do it it seems fine but when it starts the spinning it really screws up and falls apart. This has been a problem for two days now and our machine starts leaking. I NEED HELP.
We'd be happy to help you out with that! We offer free technical advice and diagnosis. To answer specific questions about specific models, we would need to know your model number so that we can consult a diagram of your unit. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. One of our agents can take the model number, look up the schematics, and talk you through any issues or questions you may be having.
Mine is super loose and just hangs there with no tightness.. what am I doing wrong?
This really had me stressed
lg frontnt lord washing machines
Phew!
Glad we could help!
I washed....a backpack and it just f up everything like my God
Oh no! You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We’re here to help 7 days a week, and we can talk you through what to do next.
this is just designed to fail springs don't last forever
If there is anything we can help you with in the future please let us know.
This is such a turd design