@@ryanferris7841 I'm off round Anglesey this weekend, gimme a shout if your ever over here, I'd love to go out on the sibs together. Honwave t38ie with tohatsu 20hp
What a fantastic video and a great resourceful job , I am going to do something like this with my T38 but I'm thinking of putting foam matting , that interlocking stuff under a piece of ply about a metre and a half by the width of the boat to sit my scuba tank on . This is our first dinghy and I'm not sure where to put a ladder to get back into the boat or the strongest method for fixing it ?? Any advice would be appreciated 😊
Thanks 🙏 I got the inflatable seat on eBay at the time however the buyer is fine now ☹️ however if you do manage to get 1 it’s the smaller 1 you need for a t38! I thought about getting a ladder myself however I wasn’t sure how to mount it so I didn’t bother lol
Here you go- 12mm plywood 202 cm long 96 cm wide at the stern tapering down to 86 cm at the bow end! Make sure you notch out for the drain plug and cut to clear where the tubes join the transom! All above is a guide only as other t38s may vary slightly! I appreciate your support
Sorry I haven’t got the keel support measurements to hand I need to take the floor out to measure it which I will do and get back to you! Its just a piece of wood
Ha - nice job! What do you think the weight of all the flooring / bow is? would be interesting to know what it adds to the 48kg of the boat... Thanks for the video.
How is this going for you a few months later ? Is there anything you would approach differently ? Any issues with chaffing or debris. I got a t38 a month ago and this was in my mind when buying it .
Great - thanks for the response ! Good to know . I’ll give it a go. Not the biggest investment in the world .😂 I was thinking of a hard foam board rather than ply but will try the ply first ! Thanks again 👍
Hi Tom sorry for my bad audio, the tape is called eternabond tape!! That’s just a brand name, it’s basically an RV tape used mostly for sealing roofs 👍
Great video Ferryman! Would like to do the same with my t38. To save a bit of time would you be happy to share dimensions for the floor? Happy to donate to your channel!
Here you go- 12mm 202 cm long 96 cm wide at the stern tapering down to 86 cm at the bow end! Make sure you notch out for the drain plug and cut to clear where the tubes join the transom! All above is a guide only as other t38s may vary slightly! I appreciate your support however your subscription means a lot and if you share my videos amongst your friends I would be grateful ☺️ I’m trying to achieve 500 subs 😝
Great job looks fantastic, very professional.
Thanks mate
thats an AWESOME build mate, very well done
Thanks a lot buddy, I can’t wait to get it in the water
@@ryanferris7841 I'm off round Anglesey this weekend, gimme a shout if your ever over here, I'd love to go out on the sibs together.
Honwave t38ie with tohatsu 20hp
Fantastic job, looks great 👍
Thank 🙏
I just knew the EVA Foam was coming in the post 😅 great job 👏
😂👍
@@ryanferris7841 You'll sleep tonight 😆😆😄🤣
That's looks brilliant I'm going to do this on my honewave t38ie3
Thanks 🙏
What a fantastic video and a great resourceful job , I am going to do something like this with my T38 but I'm thinking of putting foam matting , that interlocking stuff under a piece of ply about a metre and a half by the width of the boat to sit my scuba tank on .
This is our first dinghy and I'm not sure where to put a ladder to get back into the boat or the strongest method for fixing it ??
Any advice would be appreciated 😊
Thanks 🙏 I got the inflatable seat on eBay at the time however the buyer is fine now ☹️ however if you do manage to get 1 it’s the smaller 1 you need for a t38! I thought about getting a ladder myself however I wasn’t sure how to mount it so I didn’t bother lol
I think it may be a case of putting a few D rings somewhere for a ladder , I'll have to check Google for D rings and glue ?
Thanks 😉👍
Great job! Trying to do the same for mine for next season! :) Any measurements for the keel support available?
Hello sorry for the late reply when I take the floor out I will measure it for you! And get back.
Looks a great job
@@philwebb606 cheers pal
Good morning , Nice job
What the measures of the quill ? Thank you
@@viajarsemsairdecasa9206 thanks ☺️
@@viajarsemsairdecasa9206 quill?
Good job mate
Hello.Nice Job. I have a question. What kind of wood do you use? What is the bridge under the board for and what are its dimensions? Kind regards
Here you go- 12mm plywood 202 cm long 96 cm wide at the stern tapering down to 86 cm at the bow end! Make sure you notch out for the drain plug and cut to clear where the tubes join the transom! All above is a guide only as other t38s may vary slightly! I appreciate your support
Hi there can you give me the measurements for the keel support please
great video mate, you should make and sell these.
Thanks 🤩
Thanks but I mean the Dimension of the keel or what is that on the backside?
Sorry I haven’t got the keel support measurements to hand I need to take the floor out to measure it which I will do and get back to you! Its just a piece of wood
Ha - nice job! What do you think the weight of all the flooring / bow is? would be interesting to know what it adds to the 48kg of the boat...
Thanks for the video.
@@tonus6559 I reckon another 15/20 👍
Just one other thing, what width is your ply ?
12mm 👍
How is this going for you a few months later ?
Is there anything you would approach differently ? Any issues with chaffing or debris. I got a t38 a month ago and this was in my mind when buying it .
Hello everything is perfect so far with no problems whatsoever all positive! I say go for it 👍
Great - thanks for the response ! Good to know . I’ll give it a go. Not the biggest investment in the world .😂 I was thinking of a hard foam board rather than ply but will try the ply first ! Thanks again 👍
@@davidcollins9817 you won’t regret it
What is the name of that tape please ? - I couldn't make it out on the video; thanks again-Tom
Hi Tom sorry for my bad audio, the tape is called eternabond tape!! That’s just a brand name, it’s basically an RV tape used mostly for sealing roofs 👍
@@ryanferris7841 Brilliant-thank you-Tom
What thickness of wood you use? I've been thinking of doing the same to mine, looks awesome 👌🏻
Thanks mate 12mm no thicker at the edges
Great video Ferryman! Would like to do the same with my t38. To save a bit of time would you be happy to share dimensions for the floor? Happy to donate to your channel!
Here you go- 12mm 202 cm long 96 cm wide at the stern tapering down to 86 cm at the bow end! Make sure you notch out for the drain plug and cut to clear where the tubes join the transom! All above is a guide only as other t38s may vary slightly! I appreciate your support however your subscription means a lot and if you share my videos amongst your friends I would be grateful ☺️ I’m trying to achieve 500 subs 😝