2021 Suzuki V-Strom Lift Kit - Lust Racing

Поділитися
Вставка
  • Опубліковано 4 жов 2024
  • Installing a Lust Racing lift kit on my 2021 Suzuki V-Strom 650XT. I nearly always ride 2 up with my wife and we do like to take the occasional off road path to adventure so, thought this might be a fun addition.
    The Wee is not known for its ground clearance even with a single rider. With 2 up the Wee sits even lower.
    I purchased the 40mm (1.6 inch) lift kit for the Wee from Lust Racing (lustracing.com). I live in the US and Lust Racing is in the UK. Worked out well, easy to purchase and lift kit arrived in about a week and half. Not bad at all!
    Installation of the ‘dog bones’ covered in this video. Enjoy!

КОМЕНТАРІ • 29

  • @MrFlamerFuel
    @MrFlamerFuel Рік тому +1

    Please make a follow-up video of handling and other adjustments you had to make. This video left us with so many questins ;)

  • @jonathanandrew6191
    @jonathanandrew6191 5 місяців тому

    Helpful, I love your acknowledgment of amateur mechanics because I’m exactly the same 😄 Great to see this before I attempt the same, thanks!

  • @christopherdcosta2123
    @christopherdcosta2123 Місяць тому +1

    How's the experience with the new lift kit? , as I also face ground clearance issue . I purchased a pre-owned vstrom so I could ride along with my wife .looking for your valuable feedback.

    • @AirJarvis
      @AirJarvis  Місяць тому

      The kit did help with ground clearance. But does make for a bit not lean when on kickstand. Recommend extending kickstand or using a block under kickstand.
      We did light off roading and the increased height made for more confident riding.

  • @nniii123
    @nniii123 Рік тому +1

    Hello, good video.
    How does it handle after the change? On road and off? I suppose it sharpened the angle on the forks - did you notice it handling different in loose gravel?
    Are you planning on adjusting front as well? Saw those mods on NC750X and people usually put spacers in the forks to lift the front accordingly.

  • @AndriyPrepiyalo
    @AndriyPrepiyalo 2 роки тому +1

    Nicely done!
    Side stand will definitely require some tweaks :)
    You've mentioned that Ozarks video, would you also try to lift the front as well?

    • @AirJarvis
      @AirJarvis  2 роки тому

      Not sure just yet. Most of the weight is at the back of the bike, so started there. I did some videos where people modify the front, but no necessarily lift the front. Maybe for another day. 😀

  • @panagoskakatosis5314
    @panagoskakatosis5314 4 місяці тому

    like this the seat is more up???? the bike is up ???

  • @canedobrazil3209
    @canedobrazil3209 Рік тому +3

    Likeeeeee from Brazil 👍 🇧🇷

    • @AirJarvis
      @AirJarvis  Рік тому +1

      Thank you! My wife was born and raised in South America, spend a bit of time in Brazil! Hope to visit some day!

  • @mikejohnson9118
    @mikejohnson9118 Рік тому

    Did you consider the Adventure Tech lifting links? They have up to 1.125"+ dog-bones.

    • @AirJarvis
      @AirJarvis  Рік тому

      At the time had never lifted a bike. My searches at the time led me to Lust. Don’t recall seeing Adventure Tech during research. Pretty simple part, so imaging others are just fine as well.

  • @andreaverzicco1458
    @andreaverzicco1458 2 місяці тому

    Così l'hai abbassata di qualche cm ?

  • @JohnG-ie8zn
    @JohnG-ie8zn Рік тому

    Hello. Very nice video. Its easy now to get it to the double stand now?

    • @AirJarvis
      @AirJarvis  Рік тому +1

      Very easy. rear tire slightly touches ground with center stand down. if doing chain Maint, etc., then I usually place a 1 inch board under the stand and lift bike on the board. works well.

  • @p.g.indiatashi8073
    @p.g.indiatashi8073 Рік тому

    There are different Dog bone lift sizes on lustSite. What size did u use 25mm lift or 40mm lift?

    • @AirJarvis
      @AirJarvis  Рік тому +1

      I purchased the 40mm set. In video I mention 1 inch but actually 1.6 inch / 40mm. Have had no issues other than the bike lean with original kickstand. I end up using center stand quite a bit.

    • @christopherdcosta2123
      @christopherdcosta2123 Місяць тому

      The center stand is very close to touching the chain , have you checked that ?

  • @nestogm9511
    @nestogm9511 Рік тому

    So i want to raise my Vstrom, do the replacements need to be longer or shorter? Im confused

    • @AirJarvis
      @AirJarvis  Рік тому +2

      Yeah, it is a little confusing. Shorter link raises the bike. When purchasing from lust, site tells you if kit raises or lowers.
      When playing with it, it makes sense as a shorter link, shortens the gap between the bottom brace and the rear suspension.

    • @nestogm9511
      @nestogm9511 Рік тому

      @@AirJarvis great thanks for the update

  • @rabidwookie606
    @rabidwookie606 Рік тому

    Do you have to adjust the chain after this?

    • @AirJarvis
      @AirJarvis  Рік тому

      Did not event think about that. Did not adjust it at the time. I recently put new tires on, through that process, adjusted the chain.

  • @jerseycowboy1
    @jerseycowboy1 2 роки тому

    Well a plate under kick stand....get a lower seat

    • @AirJarvis
      @AirJarvis  Рік тому

      still looking into options for something under kickstand. 🥴 seat height is good for me.

  • @9212428
    @9212428 2 роки тому +1

    песок удали из под рычага\\\валенок

    • @Kosthl
      @Kosthl Рік тому +2

      Валянок ти! Навчись культурно розмовляти!!!

    • @СергейЛ-х4д
      @СергейЛ-х4д Рік тому

      ​@@Kosthl то лошара з рашки. Культура , то для нього діло незрозуміле )