BIG Turbo S60R AWD Sleeper Dragy 100-200km/h 6,13s!!! Garrett G30 770
Вставка
- Опубліковано 30 вер 2024
- Garrett G30 770
3,5"dp
3,5" turbo inlet tubes
1200cc injectors
Walbro GST520 and Aem340 relay controlled
AEM frp
Return fuelsystem
Do88 intercooler
Ported 921 manifold
Gustav Urbas tuning on E85 (E75 in tank right know)
Instagram: TommyRylander87
Beautiful automobile, a beast, Volvo for life.
great car and all but try with lower gear pls
And u think i haven't tried that 😅
1/4 mile.???? 🤔🤔🤔🤔
What a savage beast this is love it!
Thinking about putting this setup on my 2.4t5 v70, I have forged rods and 82mm wiseco pistons already. What kind of power are you expecting with this setup, and is the g30 a laggy turbo or would a g25 be a better bet? I'm aiming for around 500bhp
Expecting between 650-700hp in engine, i would recommend the G30 - 770 perfect for these engines 👌
Great engine and mods I am planning the same build robert.
What a sound 🥵🥰
Crazy car 🤩
Very impressive. Is this a stock 2.5 block? Or has it been resleeved, or swapped out for a 2.4? Either way this is an extremely impressive build.
Swapped for a 2.4T5 more information and pictures on Instagram: TommyRylander87
My 17yo daughter bought one for herself as a first car. She fast. I had an AWD Ford Fusion 2.0L turbo. Beyond about 40mph the accelerator didn't do very much except cause more noise and use more gas.
Hehe ok
Manual or automatic?
Manual
I want to buy a S60 R soon and learn how to change all the internals so I can put out some decent power. Is it super expensive and do you have any tips on doing things in stages?
Start with stage 0 = new coils, plugs, filters, sensors so all that is good. Then the first upgrade should ALWAYS be a upgrade intercooler. After that bigger dp, then ask your tuner what he offers for diffrent stages and what hardware he prefer to be seen in those stages.
@@TommyRylander that's awsome man thanks, could I apply this to a 2005 2.0 T? I currently own one of these.
@@Whoisitthatknowsyourthinking Yes
@@TommyRylanderok cool! Can the turbo on a 2.0 be changed to anything bigger?
@@Whoisitthatknowsyourthinking look at forums… But yes, the 2.0T owners usually throw on a 16T or bigger. You’ll need a bigger charge pipe (found on 2.3T5 for 16T) and injectors. Expect closer to 300
Very good performance, impressive s60r! How much horsepower and nm does the block stock hold?
Depends on alot of things
Better than Bmw and audi
asså satan..
Funderar på att skaffa en steg 3 tuning från Contrast, hur var upplevelsen?
Have you tried with a lower Gear and a super fast shift? You Will be under 6
My record is 5,67s
And clutch wont let me shift fast.
Very impressive performance, but i'd prefer less turbo lag. I think 400 hp is perfect for these 5 cylinders. Still an awesome build tough.
I would like to see the performance on a stock S60R from 4th gear. And then we can se how "laggy" this is 😅
Bro it was done in 1 gear. Go kick rocks lol
@@smotpoker15That's not the point and almost 6 seconds flat 100-200 is insanely fast!
Io sono senza parole. 100-200 coperto con un solo rapporto è roba da pochissimi.
Ho la mascella slogata perché sono rimasto davvero a bocca aperta. Chapeau!
My record with that turbo is 5,67s 100-200km/h
Jävlar vilken fet Volvo, 90 till 200 på en växel!
Jag håller på att renovera en B5244T5 som jag tänkte slänga i min 05 S80 awd. Det jag undrar är hur mycket fördelningslådan klarar av och har du någon aning om det är samma fördelningslådor i våra bilar eller om jag måste uppgradera? Jag siktar på 600whp och är inte så sugen på att spränga något 😆
Skall vara samma, håller bra så länge man inte dumpar kopplingen vid start.
Hur mycket häst tror du att du ligger på? btw Riktigt sjukt bygge
Svårt att säga, men tror jag ligger mellan 650-700hk i motorn
Stock rotating assembly?
Nope
100-200 4 gear? 1/4 mile?
Volvo Clusters are so accurate 🙂
could just be the angle the camera is set up and is correct from the drivers position
Still running stock internals?
No, K1 rods and acl rodbearings, TSP Sweden valvesprings.
@@TommyRylander it's awesome!
Hello, great car! Did you put shims on the engine block? Or when you recommend to do this kind of job, at about how many horse power? Thank you!
If you want more than 400hp you should shim the block. A friend of mine tuned his stock b5244t5 to 550hp on stock internals and he cracked a cylinder wall.
I would say bad tune
how much hp
Around 700hp in this clip
model of gearbox? stock haha
YUPP
@@TommyRylander how long survived?
How many hp ur running ? Crazy build!
Around 700whp
How much psi are you running for 700whp?
Was about 41psi on that setup
наебалово
English please 🙌
@@TommyRylander He says it's fake lol, nevermind. Must be never seen dragy before
@@gtrkz1 Haha lol 😅
Чёт он не понимает.. Но он так едет... И как то так. Да согласен наебалово медленно😜
@@TommyRylander 1/4mile????
Horses Power?
Almost 700whp
Hmmmh.. Pretty najs, but dont impressive.
Well let's se what u got then 🤣
On one gear 100-200 is cheat code
No, that's good powerband 🤷♂️