Wow! We currently have 2 execs and a Model Y but are anticipating a 3 across situation next year similar to this. Thank you for putting this video together!
Are there any other carseat brands that you know of that are similar dimensions to the nuna? I currently have a model Y and am gonna be in a 3 across situation. 1 is forward facing and I will have 2 rear facing.
Yes. The infant seat is only 17 inches wide so it will work. I find the RX bases install better for me with the seat belt vs the original base but you could do either one. An RX base will work on any Pipa except the pipa urbn.
Thank you for this video!!!!! We have a new baby and trying to fit 3 across in a Y. What would you recommend for an infant, 5 year old and 8 year old. 8 year old would prefer not using the 5 point harness.
The infant I would do in an Evanflo Slim Revolve, 5 year old in a chicco myfit (provided you have them forward facing and not rear facing still) and 8 year old in Peg Perego Flex 120 if you want a high back booster. I am going to be making a video with these seats in the next week so when I post it I will be sure to tag you.
Also you could do an infant seat for the infant. All of those are 17 inches wide so they won't present an issue with width but I would say Chicco Keyfits and Clek Liings have in my opinion the easiest seat belt installations for non centered seats. So if you want an infant seat you could do either of those.
My current setup is a Clek Foonf and Liing in the 2 outboard seats, and I'm having a friend come visit with her Doona. Would It work to do the Liing w/seatbelt install on outboard seat, Foonf in the center, and Doona on the other outboard seat?
That would be workable. You will be able to belt the seats and fit all three without issue. Best of luck and if you get hung up on any aspect of it be sure to check the instructions. I would suggest you remind your friend to bring her doona instruction book just so if there are any questions you are covered :) Have fun!
I have a model y seven seater. can you fit one nuna exec, one nuna rave, and one uppa baby infant, all rear facing? have a 7 week old, 3.5 year old, 1.5 year old but very petite want rear facing as long as possible ? thanks so much its been challenging.
It might be possible but its going to be super tight with the Rava. The issue is that your spacing on the infant seat will have to be pretty off center for the carrier to drop down into the base. Your best bet is probably to position the infant carrier in the spot with the most width which iirc is behind the driver and scooting the base toward the door (seat belt installation not lower anchors) in order to give the carrier the space to drop in. And I would like to add this is just a guess. I am not promising or suggesting I know everything about installing but based on my recollection of how the buckle stocks sit I would put the the older kids behind the passenger and in the center purely based on how those buckle stocks sit.
Hi! Thanks for your video. I have 2 kids now (2.5 and 5) and an infant on the way. I would be going two forward facing and one rear facing infant. (We have a uppa baby mesa for the infant, but i could use 3 execs instead). Do you think the two forward facing/one rear facing is possible and what would be the optimal configuration? Thanks so much!
So your Mesa is 17 inches wide so def can reuse that and that one can install very well with belt so I would keep the infant seat and use that for the new baby. If you are doing forward facing I might suggest looking at the Chicco Myfits as those buckle in very easily and are the same width as the Exec. They are cheaper as they are only forward facing. I think like $239 vs $750 for the Exec. Or you could do one Chicco myfit and one Exec as then the infant can eventually move into the exec rear facing when they outgrow the mesa and you could use the myfit then for the middle child and buy a booster for the oldest. Narrow Boosters are the Peg Flex 120 (OBSESSED I made a video about it) and then like little ones like the bubble bum. Hopefully this is helpful. If you want to buy all new by all means go ahead but you could achieve more longevity with the seats by going with combination seat (Chicco Myfit) for at least one of those choices. Thank you for watching and congrats on the new baby! Here is that myfit for you to see www.destinationbabykids.com/chicco-myfit-cleartex-harness-booster-car-seat-shadow
If you had 2 of these rear facing and 1 forward facing, how would you arrange them? Or would it change depending on the type of car? (still asking about 3 across)
I would put the smallest rf in the center. One of the ff on the side so I could place the littest one in the center reaching over the ff seat that is on the side.
I'm 6'2 with a rear facing Nuna Rava behind me. I have to sit a bit closer to the wheel than I would if it wasn't behind me but not by much. Overall I'm comfortable driving with this behind me. This is in a model Y.
I am scary more there are missing parking sensors and radar in Tesla Y a 3 from Q3/2022 to now... Try to put small paper box(dog size :-) ) before or behind Tesla and start the car and go... Even my VW Touran 2018 catches the box and even breaks the car automatically, Tesla Y/3 none of reaction ..
Wow! We currently have 2 execs and a Model Y but are anticipating a 3 across situation next year similar to this. Thank you for putting this video together!
I was gonna tag you. I am so glad you saw it! I was thinking of ya. Glad you were able to check it out.
will the rear facing vents get enough air flow ? this is the issue im running into with my rear facing seats when the ac vents are not on the ceiling
Are there any other carseat brands that you know of that are similar dimensions to the nuna? I currently have a model Y and am gonna be in a 3 across situation. 1 is forward facing and I will have 2 rear facing.
wow wow wow!!! ive been wanting to see exactly this for so long- three exec seatsin tesla!! thank you!
No worries! Happy you liked it
Can these fit into the 6th and 7th seats in model y 7seaters? Great video!!!
How limited are the driver and passenger leg room?
Okay but how do you get the middle kid in lol
We have two execs and are pregnant with our third. Would this accommodate two execs and nuna infant?
Yes. The infant seat is only 17 inches wide so it will work. I find the RX bases install better for me with the seat belt vs the original base but you could do either one. An RX base will work on any Pipa except the pipa urbn.
How did it work for you guys? What did u end up getting for infant car seat?
Thank you for this video!!!!!
We have a new baby and trying to fit 3 across in a Y. What would you recommend for an infant, 5 year old and 8 year old. 8 year old would prefer not using the 5 point harness.
The infant I would do in an Evanflo Slim Revolve, 5 year old in a chicco myfit (provided you have them forward facing and not rear facing still) and 8 year old in Peg Perego Flex 120 if you want a high back booster. I am going to be making a video with these seats in the next week so when I post it I will be sure to tag you.
Also you could do an infant seat for the infant. All of those are 17 inches wide so they won't present an issue with width but I would say Chicco Keyfits and Clek Liings have in my opinion the easiest seat belt installations for non centered seats. So if you want an infant seat you could do either of those.
Thank you!!!
Our infant seat is actually the keyfit 35.
How would you arrange them? KeyFit 35 on outside, and then what in the middle?
Sorry maybe I missed this but why would it not be easier to use the latch system in the outer seats and do the buckle install on the center seat only?
If you only had one exec rear facing in the middle and left the two outer seats open, would the passengers be able to buckle their seat belts?
Would this work for 2 rear facing execs and one forward facing? And when would it eventually work for all three forward facing? 🙏
Could you do this with the britax poplar? Is a new car seat and cheaper than Nuna. It has click tight similar and is slimmer just not sure on safety?
I feel like an issue comes into play when one child needs to use the actual seatbelt in a high back booster right?
My current setup is a Clek Foonf and Liing in the 2 outboard seats, and I'm having a friend come visit with her Doona. Would It work to do the Liing w/seatbelt install on outboard seat, Foonf in the center, and Doona on the other outboard seat?
That would be workable. You will be able to belt the seats and fit all three without issue. Best of luck and if you get hung up on any aspect of it be sure to check the instructions. I would suggest you remind your friend to bring her doona instruction book just so if there are any questions you are covered :) Have fun!
I have a model y seven seater. can you fit one nuna exec, one nuna rave, and one uppa baby infant, all rear facing? have a 7 week old, 3.5 year old, 1.5 year old but very petite want rear facing as long as possible ? thanks so much its been challenging.
It might be possible but its going to be super tight with the Rava. The issue is that your spacing on the infant seat will have to be pretty off center for the carrier to drop down into the base. Your best bet is probably to position the infant carrier in the spot with the most width which iirc is behind the driver and scooting the base toward the door (seat belt installation not lower anchors) in order to give the carrier the space to drop in. And I would like to add this is just a guess. I am not promising or suggesting I know everything about installing but based on my recollection of how the buckle stocks sit I would put the the older kids behind the passenger and in the center purely based on how those buckle stocks sit.
Thank you so much !
Can it do all 3 across rear facing with nuna exec on tesla model 3?
We have diono 3rxt seats, do you know if these will work with 3 across in the model y?
Hi! Thanks for your video. I have 2 kids now (2.5 and 5) and an infant on the way. I would be going two forward facing and one rear facing infant. (We have a uppa baby mesa for the infant, but i could use 3 execs instead). Do you think the two forward facing/one rear facing is possible and what would be the optimal configuration? Thanks so much!
So your Mesa is 17 inches wide so def can reuse that and that one can install very well with belt so I would keep the infant seat and use that for the new baby. If you are doing forward facing I might suggest looking at the Chicco Myfits as those buckle in very easily and are the same width as the Exec. They are cheaper as they are only forward facing. I think like $239 vs $750 for the Exec. Or you could do one Chicco myfit and one Exec as then the infant can eventually move into the exec rear facing when they outgrow the mesa and you could use the myfit then for the middle child and buy a booster for the oldest. Narrow Boosters are the Peg Flex 120 (OBSESSED I made a video about it) and then like little ones like the bubble bum. Hopefully this is helpful. If you want to buy all new by all means go ahead but you could achieve more longevity with the seats by going with combination seat (Chicco Myfit) for at least one of those choices. Thank you for watching and congrats on the new baby! Here is that myfit for you to see www.destinationbabykids.com/chicco-myfit-cleartex-harness-booster-car-seat-shadow
can you do a video showing 3 nuna ravas in model y rear facing? 💗💗
They r too wide
Can I do rava side by side ?
Sadly the Ravas are going to be too wide to make this work. That is why Execs maybe are a better choice :)
I have two ravas in my model Y and now have a new baby. Would a foonf be able to fit with the two ravas?
@@stybel1 Again the issue is installation with where the buckle stocks sit so i suppose it's possible but I doubt very much that this will work.
It indeed did not work, would 3 Clek Foonfs fit?
If you had 2 of these rear facing and 1 forward facing, how would you arrange them? Or would it change depending on the type of car? (still asking about 3 across)
I would put the smallest rf in the center. One of the ff on the side so I could place the littest one in the center reaching over the ff seat that is on the side.
@@destinationbabykids okay thanks!
No way this fits with a 6ft person up front, my current issue
I'm 6'2 with a rear facing Nuna Rava behind me. I have to sit a bit closer to the wheel than I would if it wasn't behind me but not by much. Overall I'm comfortable driving with this behind me. This is in a model Y.
I am scary more there are missing parking sensors and radar in Tesla Y a 3 from Q3/2022 to now... Try to put small paper box(dog size :-) ) before or behind Tesla and start the car and go... Even my VW Touran 2018 catches the box and even breaks the car automatically, Tesla Y/3 none of reaction ..