BATH TAPS TAILS. FLEXIBLE HOSE. PIPE CONNECTION. EASY ACCESS. LIFE HACK.

Поділитися
Вставка
  • Опубліковано 8 вер 2024
  • It is often really difficult to find a suitable 30mm spanner to access the bath tap tails.
    Please subscribe to my channel and, if you like my videos please buy me a Coffee ko-fi.com/john...

КОМЕНТАРІ • 11

  • @chbry1050
    @chbry1050 Рік тому +1

    Thanks it's helpful!

  • @martinkiely3147
    @martinkiely3147 2 роки тому +1

    I bought this set years ago and wish I hadn’t wasted my money like you say they don’t fit properly if I could get my money back in scrap I would be happy to see them melted down and be used for something useful

    • @JohnJoss1
      @JohnJoss1  2 роки тому

      Hi Martin. Thanks for your comment. The spanner I'm talking about in the Video is supposed to be 32mm, that's correct. So it DOES fit the main nuts on the bath tap just fine, in most cases. What the video is all about is just a little tweak that you can make, to make the SAME spanner fit the nut on the tap tails AS WELL. 🙂

    • @martinkiely3147
      @martinkiely3147 2 роки тому

      @@JohnJoss1 thanks for the reply johnjoss1 yes I get that but the set is rubbish in my opinion.i bought a nerrard taped kit set a couple of years ago and compared to the set in the video is far better so much easier and life time guarantee great video though

  • @Wabsy1
    @Wabsy1 6 місяців тому

    On my bath there is a piece of ply between the tub and the connectors underneath. It's black with mould, is it supposed to be there

    • @JohnJoss1
      @JohnJoss1  6 місяців тому

      Er, no, I shouldn't think so! Sounds like there's a water leak comming through somehow. It'll either a problem with the sealing washers on the taps or the silicone around the tub needs re-doing ☺

  • @schcbh4800
    @schcbh4800 Рік тому

    Hi I'm trying to connect a 15mm hot electric tap to my cold water supply tap, I want od this with changing the Flexi hose 22mm can tell what connector to use? 15 mm to 22mm. Thanks

    • @JohnJoss1
      @JohnJoss1  Рік тому

      Maestrini Brass Reducing Nipple (3/4" BSP Male to 1/2" BSP Male) plus a 1/2 bsp female to 1/2 bsp female adaptor. Use a bit of jointing compound, or ptfe tape, connecting this lot together. Hope you have room for all this! 😂 (if you can find a 1/2 bsp female to 3/4 bsp male adaptor, which would be ideal , then let me know where you can get such a thing please?)

  • @DofTF
    @DofTF 7 місяців тому

    Who's the fuc'in wood butcher who's been at those timbers!

  • @lennykelly9952
    @lennykelly9952 8 місяців тому

    Avoid flexis if possible

  • @robertsopel3306
    @robertsopel3306 Рік тому

    Japierdole