2014 Toyota RAV4 Headlights to LED conversion(Night Version)

Поділитися
Вставка
  • Опубліковано 5 жов 2024
  • #Toyota #Rav4 #artworkslights
    2014 Toyota RAV4 Sport Headlights to LED conversion(Night Version) , where I went into technical details of installing LED headlights conversion kit into Fourth generation XA40; 2012-2018. Earlier production of 4th generation of RAV4 Low Beam and High beam were converted to LED. After 2016 they mostly used different headlights, where Low and High- beams were same bulb. Questions or comments bellow; where questions....... artworkslights@gmail.com

КОМЕНТАРІ • 49

  • @catrashoo
    @catrashoo 3 роки тому +2

    I just did my high headlights, thank you so much 🙂

  • @zacharymorse9029
    @zacharymorse9029 5 років тому +2

    You just saved me a lot of money. Thanks for the info.

  • @alm77ar
    @alm77ar 4 роки тому +1

    Very helpful video

  • @hdcardenas2004
    @hdcardenas2004 4 роки тому +1

    Hello friend, I have the same truck and I have problems with the 9005 led input does not fit the connector as you did so I could enter and I saw in your video that this part of the connector where the light is going is broken

    • @artworkslights
      @artworkslights  4 роки тому

      Hello. I did not quite understand what was broken. Was there a problem with a car in this video or is there a problem with your car?

  • @Brian-ei2mx
    @Brian-ei2mx 3 роки тому

    I used Lasfit 9005’s and needed no modifications

  • @LukasNachtigall
    @LukasNachtigall 5 років тому +1

    Hi, thanks for that instruction video! :) Do you have a link to the LED set, please? And will it fit into my RAV4 2015 XLE?

    • @artworkslights
      @artworkslights  5 років тому

      Hi. Make sure you check if your headlight looks the same as in this video.

  • @LaWebdelPortu
    @LaWebdelPortu 4 роки тому +1

    Hello, you put 9005 in the projector and 9006 in the reflector? I have 2013 Rav4. Thanks.

    • @artworkslights
      @artworkslights  4 роки тому

      they are both 9005, but I had only 9006 for high/DRL. NOt every LED kit would work there.

    • @artworkslights
      @artworkslights  4 роки тому

      you can disconnect DRL from high-beams and make DRL some other bulbs, like corner lights or put different lights for that.

    • @areg6068
      @areg6068 3 роки тому

      @@artworkslights can you use the projectors as DRL?

    • @artworkslights
      @artworkslights  3 роки тому

      @@areg6068 sorry, did not understand the question.

  • @big_al6195
    @big_al6195 10 місяців тому +1

    How many lumens are the leds.?

    • @artworkslights
      @artworkslights  10 місяців тому

      I do not remember for sure, but i think, between 1500 to 2000

  • @bbhighlights1856
    @bbhighlights1856 3 роки тому +1

    I have rav4 2015. Do I need to adjust the LED's to get the better lighting?since the housing socket is on the side instead on the back?

    • @artworkslights
      @artworkslights  3 роки тому

      no, good LED conversion kit, just replaces the bulb(source of light) , It should not change the direction of light.

    • @bbhighlights1856
      @bbhighlights1856 3 роки тому

      @@artworkslights Great. Thank you

  • @knilyas
    @knilyas 5 років тому +1

    can you tell me what is the reference of the LED bulb. I have the same rav4. thank you

    • @artworkslights
      @artworkslights  5 років тому +1

      If your car is of the same year, it should be like I said in this video, I think 9005 for low beam

    • @knilyas
      @knilyas 5 років тому

      Art Works L thanks 👍

    • @artworkslights
      @artworkslights  3 роки тому

      @ShoTa TsereTeli Thank you thank you.

  • @ntrnlgrv
    @ntrnlgrv 4 роки тому +1

    Do you get a bulb out error on your dash when installing led headlights?

    • @artworkslights
      @artworkslights  4 роки тому

      Not with LED kit that I have used. Not for 2014 and 2015 models.

  • @kang5918
    @kang5918 5 років тому +1

    Is there a problem with overheating?

    • @artworkslights
      @artworkslights  5 років тому

      shouldn't be if you make one or 2 tiny holes in covers for low-beams. in Summer heat headlights need a little air circulation. So far, no problems since the day this was done.

    • @teenermeener971
      @teenermeener971 4 роки тому

      @@artworkslights did you use the same bulb for low and high beams?

    • @artworkslights
      @artworkslights  4 роки тому

      @@teenermeener971 bulb number is the same, but LED design could be different. Some LED conversion kits cannot work with DRL mode, so you need a kit for that or disable DRL.

  • @jimnguyen1267
    @jimnguyen1267 4 роки тому +1

    You messed up the led lights bulb.

  • @garydoherty3374
    @garydoherty3374 5 років тому

    I bought something similar do you think I should trim them? There a bit loose

    • @artworkslights
      @artworkslights  5 років тому

      if they are loose, then you don't trim them. Are you tryin to convert high beams? you can use seals from originals bulbs on LED kit

  • @jacobgarcia48
    @jacobgarcia48 5 років тому

    Can you provide the link where you bought them?

  • @christopher23.
    @christopher23. 5 років тому

    Do you know how the two little led lights above the signal light turn on?i seeing another video of a guy who had them on.

    • @artworkslights
      @artworkslights  5 років тому

      It depends on production year and different headlights that were factory installed in these cars,; also, there may be settings on information screen(cluster) , where you can turn it on or off.

    • @marsinbako8491
      @marsinbako8491 4 роки тому +1

      @ cris c to answer your question the guy you see on the other video he modified his that’s means he did some work to make it light up. Factory rav 4 those don’t light up.

  • @marsinbako8491
    @marsinbako8491 4 роки тому

    How can you make the led Cool if it is enclosed?

    • @artworkslights
      @artworkslights  4 роки тому

      need to create airflow, this is what 2 tiny holes are for.

  • @donjones2500
    @donjones2500 5 років тому

    Does the high beam have the ballast covers to put back in?

    • @artworkslights
      @artworkslights  5 років тому

      I am not sure exactly about your question, but if you talking about headlight covers/caps or boots to cover the bulb in the back, this model of a headlight

  • @claudioorozco4301
    @claudioorozco4301 5 років тому

    What type of bulbs you got?.. Brand and style Please. I want to change my lights but im afraid is not going to fit inside the cover of the low beams.

    • @artworkslights
      @artworkslights  5 років тому

      I have few different style LED conversions that I use. it depends which bulbs do you want to convert and what year is your car. There are quite few headlights for Rav4.

    • @claudioorozco4301
      @claudioorozco4301 5 років тому

      I have a 2014 RAV4 limited

    • @artworkslights
      @artworkslights  5 років тому

      @@claudioorozco4301 in description I listed my email. Send me a picture of your headlight and I could probably help you better this way.

  • @SURVEYSEZ
    @SURVEYSEZ Рік тому

    why not buy something that fits? for the love of god.

    • @artworkslights
      @artworkslights  Рік тому

      because you're asking about something that was done more than 4 years ago. God has nothing to do with installation, technology or science. Not everything that fits, works and not everything that works fit.