Halogen bulbs are so hot that the glass has to be perfectly clear and clean because the slightest fingerprint smudge will partially block the light from escaping and that causes heat buildup and glass cracks from too much heat. The COB (chip on board) LED headlight bulbs also generate heat, sometimes as hot as a hot cup of tea, which one shouldn’t touch needlessly if one can avoid it
My car is a nissan 300zx Z32 model. My car is not DRL OEM. I noticed I have a pair of Fog lights that have been removed but the connections are still there, there is a white and black from the old fog light connection, I just want the white DRL light not the Amber to work so the current amber hooked to the car will work via its OEM, so based on this which wires do I connect to the old Fog light connectors which are black and white and will it work if I only connect the DRL white not the amber. Thanks excellent work
Can you tell me- can I put this stripe over my lights where I already have a fabric led stripe on top of headlight, but this one is way prettier. Does it mean if I put this kind of additional light on car, it will substitute some initial bulb, or I can have all lights I had before plus one additional more? Thanks
Love these LED strip lights, my only concern, here in the UK, when you jet wash your car, eventually, those strips will come loose at the worse possible time!!
So you only need to wire tap the three wires going into each signal light and that also makes the white L.e.d' s light up too even though they work from a different switch ?? 🤔
Iv fitted these to my car , I put the red wire straight to the ignition feed in the fuse box and the ground to the chassis then found my indicator wire the lights work fine so do the indicators but wen I start the car the indicators don’t work but the drl still light up?
Need help to idendifiy wire color codes. My car is 2021 Rav4 on driver side wire color for turn signal bulb are green, green/black and white/black. passeger side are red, red/black and white. How to connect with the strips
Hello I want this led strips on my car,only for turning signal but i have a warning system.So my guestion is do your car show warning about blown bulb or not.Thanks for answer
Thank you for the video. Question, my headlights have a sharp turn(angle) and I wonder how flexible is this strip when laying flat. It will lay almost like yours but I need it to curve a little more
I put the red and black on the pos and neg of my low beam(ones that you put on at night) and I’m having issues. I guess I have to put it on my drl bulbs?
@@bigbanka5572 2014 Camry. It’s tapped into the low beams so it only turns on when the lights are on and if you turn the signal on the lights flash with its should I change it or just change the ground idk
The only reason why some people have to tap in the fuse box is because some cars don't come with DRL already, so, you would have to use an ACC connection from the fuse box like the radio to be able to install DRLs
What does ACC mean? I bought some DRL’s and it has a control box with it but in the instructions it says to wire the black and red wire to the battery and the white wire to the ACC. What do they mean by ACC?
Need some help! I have these and wanting to connect to my vw transporter 2006 ( uk ) the indicator bulb just pulls out and not attached tk any cables at all. Could I just connect the led strip to my headlight bulb if so would the indicator still work on the strip or does it need to be connected to the indicator bulb? Cheers and great video.
I added these to me Scirocco and it works when you turn the key once but once the ignition is on it switches off, I'm assuming because my car is giving more than 12V power once its running so the LED strip switch off, is there anyway around this?
I prefer your wiring method by just using the wiring already provided for all three leads. Was there any long-term issue with any fuses blowing or not being happy with the small extra load of the LEDs? Thanks in advance
Hi mate i did the same for my citroen c1 , but have one issue. When i use only the turns they work. But when day lights is on and i start some of the turns left or rights, the just flash one's and stop it. I take the negative and plus fron side lights and second plus from turns. Where is the issue???
Hi.. Could you give me the name of a good brand for these LED LIGHTS because most of them are just cheap replicas. I wanted to buy one from a good company.
I have wired the day running light the red wire to a switched live in the fusebox black earth to body and yellow to indicator live wire the indicator doesn't work when the day running light part is on but does with hazards or when I lock car any ideas why it doesn't indicate when the running light is on
Hi, I have Toyota RAV4 2020 Europea versión. The cables of my direction bulb are diferents. Can I send you a photo for help me? Thanks por all and sorry for my english
For led strip’s running light (red one) wire, don’t you have to tap to head light wire? I just wonder how does the led strip’s running light wire works just tapping to turn signal wire..
@@bigbanka5572 Mine just have 2 wire, I install led strip, and work fine, until I turn the lights and use the turn light, flashes just ones then both lights (white or ambar) stops, until I turn off turn signal, white light came back. Can something extra be install to prevent this issue.
I installed the LED strips and the problem is that when the white light is on, there is no yellow light. When I turn off the white light - the yellow light is on.
If I want to use these lights for DRL, can I just wire it to the high beam light (since it’s also the drl light) and it would work? I believe it gives our 6volts so I’m sure if that would be enough to power these strips.
not worth it for DRL since it not really that bright in sun light, but really help at night. I have it install in camry 2016, and rav4 2020. the strip on the camry is old and hazed quick, but still work and look great at night.
can you also give me info on the wiretap and the wire that you use? I bought some on amazon and it seems the tap is too big and the wire is very small it didn't cut to the core of the wire when closed.
My car has the same three wires but I don’t know which one do I have to connect together plz can u explain me plz there’s black wire and the others one has white Nd yellow Nd the other one has white and green let me know plz 🙏
It is safe but it will eventually corrode the wires. Btw if you are still planning to tap the wires, DO NOT do it so close to the plug/socket. Give yourself room for error and space to work, maybe offset the taps a bit too. I’m sure it must’ve been tough to fit all the taps so close together, now imagine having to service that in case of failure. Lastly dielectric grease might help with corrosion.
Putting the strip outside of the headlight will make it stain the headlight itself, threw min away after a few months because it was stained and looked ugly
Hi would you happen to know the reason why my led strip is not in sync with my signal light when my headlights are on? Tapped the signal lights for power source. Thanks.
Bro what are the clips called pls? My pack did not come with a clip...also, do i need to make a cut on the wires for the turn signal or i just attach the clips?
when talking about cars, it's less confusing to call the sides of a car by what type of Passenger would be on that side. so you have the Driver's side and the passenger's side.
"plug and play just switch them around" lololololol
😂🤣
Pinned!
does it need for relays?
@@beausky4100 no
You tied all three wires to the connectors on the turn signal?
Thats actually better looking than most cars that have them from factory, great job bro👍
LED’s are the ones that are safe to touch halogens blow when you touch the bulb because the oil from your fingers ruins the gas in the bulb
yeah
Halogen bulbs are so hot that the glass has to be perfectly clear and clean because the slightest fingerprint smudge will partially block the light from escaping and that causes heat buildup and glass cracks from too much heat. The COB (chip on board) LED headlight bulbs also generate heat, sometimes as hot as a hot cup of tea, which one shouldn’t touch needlessly if one can avoid it
OMG I’ve been waiting for someone to show me how to install these! Thanks dude!
Having the lights on the outside is pretty dumb. How do you put them inside of your headlight?
You’d have to open up the headlight and seal them back
I thought about doing a video on that
@@bigbanka5572 see I feel like I’d break it…. Or seal it back on incorrectly and have water leak thru
Oil from fingers does in fact affect halogen bulbs. You have your facts mixed up.
Matthew Martin yes
came out amazing for me
no. you don't touch halogen bulbs. oil from hand etc destroys their life. not the LEDs.
Which could you recommend for Toyota Highlander 2018? And how can I to install them? I hope your response, you got a new subscriber 🎉
The way the turn signal flows with the stock turn signal looks amazing
It's called Sequential Turn Signal. Usually a yellow wire and red and black
My car is a nissan 300zx Z32 model. My car is not DRL OEM. I noticed I have a pair of Fog lights that have been removed but the connections are still there, there is a white and black from the old fog light connection, I just want the white DRL light not the Amber to work so the current amber hooked to the car will work via its OEM, so based on this which wires do I connect to the old Fog light connectors which are black and white and will it work if I only connect the DRL white not the amber. Thanks excellent work
I did the same installation but my amber lights wont work properly im wondering maybe because the one that i bought dont have the black box fuse
Have you got any idea why turning signal light doesn't work when car is on and works fine when engine is off?
Hi what are those small red things you have on the wires to connect to the turn signal light?
The ones youre putting on at 1:51
T connectors
It absolutely will affect those bulbs....but do you
I think it's a good addition to any car. It Looks really cool 👍🏼
SAME HERE!
Can you tell me- can I put this stripe over my lights where I already have a fabric led stripe on top of headlight, but this one is way prettier. Does it mean if I put this kind of additional light on car, it will substitute some initial bulb, or I can have all lights I had before plus one additional more?
Thanks
How are they 1year thinking about getting some for Mitsubishi 08
Still work great!
Can I ask you a question? Is match that Honda Accord 2008? Let me know thank you!
Do you have can bus problem on instrument table, when you connect LED strip?
YOU HAD ONE JOB THE WHOLE TIME
Just ordered these ! Let me know how it’s holding up after 3 years year ? I’m super excited I love this look
Love these LED strip lights, my only concern, here in the UK, when you jet wash your car, eventually, those strips will come loose at the worse possible time!!
So you only need to wire tap the three wires going into each signal light and that also makes the white L.e.d' s light up too even though they work from a different switch ?? 🤔
It's because the DRL on this one double as an indicator
'
wow that coool and safety turnning signlights...
how about rear taillights and door
Where did I get those red connectors please lmk. Thanks.
Iv fitted these to my car , I put the red wire straight to the ignition feed in the fuse box and the ground to the chassis then found my indicator wire the lights work fine so do the indicators but wen I start the car the indicators don’t work but the drl still light up?
These look so nice! Thank you for the video! I'm making little upgrades to my LE and this is next on my list
Need help to idendifiy wire color codes. My car is 2021 Rav4 on driver side wire color for turn signal bulb are green, green/black and white/black. passeger side are red, red/black and white. How to connect with the strips
where did you buy that stripes signal light,thank for answer❤
I love you bro👌exactly the confirmation I was waiting for😊thanks!
Great video! straight to the point! Good info, clear audio and smooth filming! helped Alot!
Hello I want this led strips on my car,only for turning signal but i have a warning system.So my guestion is do your car show warning about blown bulb or not.Thanks for answer
I don’t think so you should be fine
Ok thank you for fast answer 🙂
@@sobeslavi.2526 of course no problem
When i turn on car LED stripes off but when i turn off car then leds start light
You are the man. Thank you from the future😂
Excellent job man, very clean and good looking results too. 👍🏻👊🏻
In my 2022 RAV4 it only has two wires, green and white with a black line
Thank you for the video. Question, my headlights have a sharp turn(angle) and I wonder how flexible is this strip when laying flat. It will lay almost like yours but I need it to curve a little more
It should be okay to curve.
What car is it for
@@bigbanka5572 Hyundai Tiburon
Thank yoy for this video. The installation worked out well. Looks AWESOME !!!!
Thank you so much!
How this can be do in mazda 6 2003 sedan model
Does it effect cars performance.
Not at all lol
How long they last? And how do you remove them that's a very sticky glue?
Thank you this video helped and made my rav4 look amazing!
You sitting behind the wheel, or anywhere inside makes it look very nice too. :-)
How did you do it, this guy didn’t show us how to tap it in its bs
Any Idea on how to do it for European cars like audi? Bc the battery is at the back not in the engine bay!
Complete noob here but can I use any strip lights for cars on Amazon and they'll pretty much have same setup right?
What are those three red things that are connecting the wires?
Wiretaps
@@bigbanka5572 Can I just tape the led wires to the headlights wires without the wiretaps?
@@Sherko.h I don’t recommend that here follow me on Instagram
Bigbank__a well talk more
Mine doesnt work while motor is running… anyone knows why? ( it works only one contact is on but motor off)
Hi. when the dimention light or low beam is on, the running turn signal does not work. what to do?
What car?
@@bigbanka5572 VW passat b5.5
I put the red and black on the pos and neg of my low beam(ones that you put on at night) and I’m having issues. I guess I have to put it on my drl bulbs?
What car?
@@bigbanka5572 2014 Camry. It’s tapped into the low beams so it only turns on when the lights are on and if you turn the signal on the lights flash with its should I change it or just change the ground idk
The only reason why some people have to tap in the fuse box is because some cars don't come with DRL already, so, you would have to use an ACC connection from the fuse box like the radio to be able to install DRLs
What does ACC mean? I bought some DRL’s and it has a control box with it but in the instructions it says to wire the black and red wire to the battery and the white wire to the ACC. What do they mean by ACC?
@@NoizyBearBearOfficialACC stands for accessory, do like your cig port
You should put LED bulbs in as well!
If I want these on the taillights: I dont want the white light on the tail, can I just use the amber?
Just buy the red and amber ones then
I'm gonna do this minus the dlr since the hybrid already has them.
How has it hold up?
Still running strong 💪🏾
Need some help! I have these and wanting to connect to my vw transporter 2006 ( uk ) the indicator bulb just pulls out and not attached tk any cables at all. Could I just connect the led strip to my headlight bulb if so would the indicator still work on the strip or does it need to be connected to the indicator bulb? Cheers and great video.
I added these to me Scirocco and it works when you turn the key once but once the ignition is on it switches off, I'm assuming because my car is giving more than 12V power once its running so the LED strip switch off, is there anyway around this?
Yes get a compasiter
@@quinjones6620 what is that?
I prefer your wiring method by just using the wiring already provided for all three leads. Was there any long-term issue with any fuses blowing or not being happy with the small extra load of the LEDs? Thanks in advance
No everything’s been fine I’m at 50k miles and a lot of nighttime run time. Voltage in the car has never changed (I have a voltage meter) all good
Could i get rid of the original signal bulb and just wire the led strip directly to the headlight?
I don’t see why not youd just have to check out the wiring
Hi mate i did the same for my citroen c1 , but have one issue. When i use only the turns they work. But when day lights is on and i start some of the turns left or rights, the just flash one's and stop it. I take the negative and plus fron side lights and second plus from turns. Where is the issue???
If you can show me a video I can figure it out maybe
Hi.. Could you give me the name of a good brand for these LED LIGHTS because most of them are just cheap replicas. I wanted to buy one from a good company.
Link is in the description
I have wired the day running light the red wire to a switched live in the fusebox black earth to body and yellow to indicator live wire the indicator doesn't work when the day running light part is on but does with hazards or when I lock car any ideas why it doesn't indicate when the running light is on
I Connect it correctly. Yellow to left signal,red to acc, black to negative. But the turn signal left & right didn’t work. Can you please tell me why?
What car?
Hi, I have Toyota RAV4 2020 Europea versión. The cables of my direction bulb are diferents. Can I send you a photo for help me? Thanks por all and sorry for my english
Sure thing Send a photo
Subscribe please!!
@@bigbanka5572 How can I send the photo?
@@sergiorodenasregueira385 do you have Instagram?
@@bigbanka5572 Yes! I have. Whats your name in Instagram? Thanks a lot!
@@sergiorodenasregueira385 bigbank__a
We’re these cut to size?
Car Led Strip Trunk Tail Brake Turn Signal Lights Flow Type Ice Blue Red Yellow White, Cool Car decoration Tailgate accessories (60 inch)
Is it legal to install the drl strip indicator on top overlaping the headlight? Or does it have to be around
I mean in my opinion you should be fine
For led strip’s running light (red one) wire, don’t you have to tap to head light wire?
I just wonder how does the led strip’s running light wire works just tapping to turn signal wire..
Peter Kim if you want DRL running you need to tap the drl
I did the signal
BIGBANK my car doesn’t have drl.. where should i tap the drl to cars don’t have oem drl?
Peter Kim tap them to the headlights or any light that turns on when your headlights are on
Orrr if you want Drl you can wire them to a fuse
BIGBANK A i see. Thanks!
@@bigbanka5572 Yeah, that's my preference. On any acc power. I like to run them w/o the headlights as my car doesn't have DRLs
Will this work on any car? Ive got a opel insignia. Just wondering if i could do the same thing just taping it to turn signal. Thanks
Yes
As long as your turn signal has 3 wires
I have a chevy aveo, tapped the LED light into the parking light and the signal wire into the signal
@@bigbanka5572 Mine just have 2 wire, I install led strip, and work fine, until I turn the lights and use the turn light, flashes just ones then both lights (white or ambar) stops, until I turn off turn signal, white light came back. Can something extra be install to prevent this issue.
Can you do this on RAV4 2018 I’ve seen that white strip on some people cars makes that rav looks hella nice
Deiby Esteban yes you can for sure same process most likely
I have it installed on my 2015 Rav4
Bonjour les 3 files de mon clignotant sont tous de la même couleur gris vous avez une idée ? comment les branché ? Merci
I installed the LED strips and the problem is that when the white light is on, there is no yellow light. When I turn off the white light - the yellow light is on.
What car?
@@bigbanka5572 Toyota Rav4 2020
DM ME on IG to send pictures
@@bigbanka5572 Ok. I will take photos and send them.
Can you show us what wires u tapped in for the left side?
I can go down tomorrow and check
Mine signal work but the day light ddint work so i wire tap my day light to headlight and it work..
What car
What about while driving? What color is it ?
White LED
If I want to use these lights for DRL, can I just wire it to the high beam light (since it’s also the drl light) and it would work? I believe it gives our 6volts so I’m sure if that would be enough to power these strips.
Yes you can do that also
Signal was just easier access for everyone to get it working all in one
not worth it for DRL since it not really that bright in sun light, but really help at night. I have it install in camry 2016, and rav4 2020. the strip on the camry is old and hazed quick, but still work and look great at night.
@@nanowar1192 was it difficult on the Camry? I have a Toyota Camry 2017 se
Where did you purchase those lights? What type are they
Aliexpress
You just put all the taps on the turning light and it works when you turn on your headlight do it go white?
Yes it goes white
Only orange when signals
@@bigbanka5572 thank you very much
@@sbjamal1624 NO PROBLEM! Give me a sub!!
Also is there any way that I can connect these somewhere when the cars turns on, these should turn on too
So the best way for that is to connect it to a DRL bulb anything that’s always on regardless.
Why would you speed up the video. How you connect drl strip wire with the signal light ???
You’re the only person to have an issue with the video speed what car do you have
@@bigbanka5572 honda accord 2016. How do you connect the blue wire with the signal light .. drl strip has blue wire
from Wish??
can you also give me info on the wiretap and the wire that you use? I bought some on amazon and it seems the tap is too big and the wire is very small it didn't cut to the core of the wire when closed.
I ordered the wire tap kit
TICONN 240PCS T-Tap Wire Connectors, Self-Stripping Quick Splice Electrical Wire Terminals, Insulated Male Quick Disconnect Spade Terminals Assortment Kit with Storage Case (240) www.amazon.com/dp/B07MLPBPW5/ref=cm_sw_r_cp_api_i_oCoOFbM2T3MBT?_encoding=UTF8&psc=1
My car has the same three wires but I don’t know which one do I have to connect together plz can u explain me plz there’s black wire and the others one has white Nd yellow Nd the other one has white and green let me know plz 🙏
Which car is it?
@@bigbanka5572 2014 Dodge Avenger SE
@@Blackgk99_ okay your best bet is to tap all the wires then plug and plau
Meri led car light me 7 wire h
Please mujhe usko on Krna btao bhai
Question will the t-tap affect the wire in the long run ?
No it’s safe!!
Corrosion will set in over time as t-tap expose the wire. Been there. Done that.
It is safe but it will eventually corrode the wires. Btw if you are still planning to tap the wires, DO NOT do it so close to the plug/socket. Give yourself room for error and space to work, maybe offset the taps a bit too. I’m sure it must’ve been tough to fit all the taps so close together, now imagine having to service that in case of failure. Lastly dielectric grease might help with corrosion.
What’s the name of those red things you use to clip the cables to the light harness?
Pablo Nunez Wire taps amazon sells a kit of them for like $8
@@bigbanka5572 thanks man, im trying to use it on superbike and see how it goes 🤣
Can you make it without the swish
You’d have to buy a different one to do that
Did you have to add a load resistor ?
No not at all
I would’ve mentioned that LOL
Sir, bakit yung sa akin gumagana nmn yung drl pero yung running signal niya ayaw. Ginawa ko rin naka-tap sa positive ng signal yung kulay yellow wire.
What is the connections for the passenger side?
I have that in the description but I’ve encountered rav4s with different wire colors
Putting the strip outside of the headlight will make it stain the headlight itself, threw min away after a few months because it was stained and looked ugly
True only if you do not maintain your headlights.
I suggest ceramic coating your headlights or ceramic tint to avoid that
Does it void the car warranty?
No it doesn’t that’s why we use the wire taps
No splicing of the cars wires
Thanks for the reply dude, it was too fast I liked and subbed
@@bigbanka5572
Can you provide a link to the company or amazon link where you bought your strip from? thanks. Good video btw!
It’s in the description!
Cela dure longtemps ?
Hi would you happen to know the reason why my led strip is not in sync with my signal light when my headlights are on? Tapped the signal lights for power source. Thanks.
Is it a delay when you cut them on because that’s normal
@@bigbanka5572 yes there's a delay with the led turn signal. But when headlights are turned off they're in sync. Okay so that's normal?
@@bigbanka5572 thanks so much
If you can email me a video of it
Adrendixon327@gmail.com
Or on Instagram BIGBANK__A
i have the same problem when the drl is turned on and i tried to use signal lights its not sync but when i use hazard lights its on sync
What are the clips called thanks
How are they holding up? Do they still work??
Very well Still working 100% with a lot of hours on them
@@bigbanka5572 thanks. Was going to order today. Hope they look good on my New Mazda 6
Mines doesn’t shows that bright any idea why?
Check your connections
Or how’s the voltage on your car?
@@bigbanka5572 it was connected to the park light will that cause it to be low?
@@aion694 that could be it
Parking lights don’t get much power
@@bigbanka5572 okay bro where else can I put connect them?
Where do you get those 3 red wire connectors
Bro what are the clips called pls? My pack did not come with a clip...also, do i need to make a cut on the wires for the turn signal or i just attach the clips?
TICONN 240PCS T-Tap Wire Connectors, Self-Stripping Quick Splice Electrical Wire Terminals, Insulated Male Quick Disconnect Spade Terminals Assortment Kit with Storage Case (240) www.amazon.com/dp/B07MLPBPW5/ref=cm_sw_r_cp_api_fabc_z.BPFbWHM7ARK?_encoding=UTF8&psc=1
when talking about cars, it's less confusing to call the sides of a car by what type of Passenger would be on that side. so you have the Driver's side and the passenger's side.
Can you cut them to size
That I’m not sure. But I don’t see why not
Does anyone know if there are any drl stripes That are non sequential ?
Hmm there should be I’m not 100% sure