We assembled half of one of these this evening at our church. I told the group there had to be a UA-cam video showing how to assemble it…..and I was right. UA-cam search first, THEN read instructions!🤣
2 recommendations for easier assembly: don’t tighten the I bolts for the propeller swing at first because you’ll have a tough time squeezing the seat/square bar enough to get it to fit in between the two metal plates. 2nd if you build the roof on the ground it’s much easier and no ladder will be needed for any of the build.
Thanks for the suggestion! We always appreciate feedback. Glad this video was able to help in certain situations and we'll keep your recommendations under advisement.
Did this really take only one hour to build? I received my set today and the pallet was broken so no instructions unfortunately. We'll have to watch this video during assembly
For the sake of time, we try to make this video as short as possible while still trying to show all the important details of the build. The timing all depends on the person building it and the help they have.
@@LifetimeProductsAssembly yes but I’m headed over to help out a family in need tomorrow and I don’t have access yet to the hardware packs. Guess I’ll bring metric & SAE
To jump to a specific step, click on the time stamp associated with the step. (For mobile devices, time stamps are down in comments.)
0:00 | Intro
Section 1
02:23 | Step 1.1
03:32 | Step 1.2
03:43 | Step 1.3
03:55 | Step 1.4
04:07 | Step 1.5
04:26 | Step 1.6
04:42 | Step 1.7
04:47 | Step 1.8
04:57 | Step 1.9
05:05 | Step 1.10
Section 2
05:27 | Step 2.1
05:49 | Step 2.2
06:03 | Step 2.3
06:55 | Step 2.4
07:44 | Step 2.5
09:20 | Step 2.6
09:46 | Step 2.7
10:58 | Step 2.8
Section 3
11:45 | Step 3.1
12:17 | Step 3.2
12:40 | Step 3.3
13:22 | Step 3.4
13:28 | Step 3.5
13:40 | Step 3.6
13:43 | Step 3.7
13:55 | Step 3.8
14:35 | Step 3.9
14:47 | Step 3.10
Section 4
15:10 | Step 4.1
15:43 | Step 4.2
15:47 | Step 4.3
16:22 | Step 4.4
Section 5
16:35 | Step 5.1
17:05 | Step 5.2
17:23 | Step 5.3
17:30 | Step 5.4
18:12 | Step 5.5
18:49 | Step 5.6
19:04 | Step 5.7
19:45 | Step 5.8
20:00 | Step 5.9
20:32 | Step 5.10
20:48 | Step 5.11
21:12 | Step 5.12
21:53 | Step 5.13
22:55 | Step 5.14
23:28 | Step 5.15
24:11 | Step 5.16
24:21 | Step 5.17
24:56 | Step 5.18
25:16 | Step 5.19
Section 6
26:17 | Step 6.1
26:28 | Step 6.2
26:41 | Step 6.3
27:52 | Step 6.4
28:24 | Step 6.5
28:57 | Step 6.6
30:16 | Step 6.7
30:32 | Step 6.8
31:23 | Step 6.9
32:09 | Step 6.10
32:19 | Step 6.11
33:10 | Step 6.12
Section 7
33:16 | Step 7.1
34:41 | Step 7.2
34:45 | Step 7.3
34:54 | Step 7.4
35:19 | Step 7.5
35:25 | Step 7.6
35:43 | Step 7.7
36:25 | Step 7.8
36:37 | Step 7.9
38:04 | Step 7.10
Section 8
38:44 | Step 8.1
39:50 | Step 8.2
40:26 | Step 8.3
41:50 | Step 8.4
42:38 | Step 8.5
43:54 | Step 8.6
Section 9
44:51 | Step 9.1
45:11 | Step 9.2
45:15 | Step 9.3
45:27 | Step 9.4
45:37 | Step 9.5
45:48 | Step 9.6
45:55 | Step 9.7
46:06 | Step 9.8
46:47 | Step 9.9
47:15 | Step 9.10
47:56 | Step 9.11
Section 10
48:15 | Step 10.1
49:43 | Step 10.2
51:40 | Step 10.3
52:15 | Step 10.4
We assembled half of one of these this evening at our church. I told the group there had to be a UA-cam video showing how to assemble it…..and I was right. UA-cam search first, THEN read instructions!🤣
2 recommendations for easier assembly: don’t tighten the I bolts for the propeller swing at first because you’ll have a tough time squeezing the seat/square bar enough to get it to fit in between the two metal plates. 2nd if you build the roof on the ground it’s much easier and no ladder will be needed for any of the build.
Thanks for the suggestion! We always appreciate feedback. Glad this video was able to help in certain situations and we'll keep your recommendations under advisement.
Solid video, thanks
Did this really take only one hour to build? I received my set today and the pallet was broken so no instructions unfortunately. We'll have to watch this video during assembly
For the sake of time, we try to make this video as short as possible while still trying to show all the important details of the build. The timing all depends on the person building it and the help they have.
Be nice if you stated what size wrenches are used
Thank you for the idea! You can also use the manual to clarify which tools you’ll be needing to use for the section and step.
@@LifetimeProductsAssembly yes but I’m headed over to help out a family in need tomorrow and I don’t have access yet to the hardware packs. Guess I’ll bring metric & SAE
44:55 “Find the letters L, I, M drill out the DIVOTS next to the letters” don’t drill out the $&@$ letters.