Just wanted to say that I really respect people like you, who actually masters crafts like these in modern times. If society ever collapses, people like you will be the ones that can make the things we will need to survive.
I love how he takes metal from items that would otherwise seem useless and after some forging, shaping and grinding it looks like something cut from a blank.
He actually might make more money off of UA-cam. But I do wish he made the item and sold it too. But then again if I were him I might want to keep all of my work.
@@c.i.a9685 I'm the master of the razors! I know every razors in the world also the garbage! I control the razor in every aspect. I have tried all the principal blades. I know all the razors in the world! I 'm the Master of razors! For me razor has no secrets!
To the people that disliked this ..Problly buy there stuff from China.. Real people truly appreciate handcrafted one off thing's.. This is amazing work...love it
I must admit that I enjoy watching you make things from scratch much more than when you fix worn out old junk. I'm not sure why, because that's pretty amazing to see.
He can just make his own!! Just gotta grab about 90 to 95 pounds of sand, throw it in his custom-made metal foundry, heat it to over 2000 degrees, and boom! Custom-made glass mirror ready for use!
This craftsman not only thinks outside the box, I bet he could make a knife out of that box. I was truly entertained by watching a geezer with mad skills.
@tsunami of the tsunami shut up, clearly he’s in survival. He’s just got a bearing farm. You can tell it’s survival because he’s trying not to chop his hands off.
They show that how they use the minerals like iron after use as renew the rusted and waste iron into useful finished product. Keep it up......, We will always support you.
Wouldn’t the more traditional hollow ground blade have been better? I still appreciate the talent of what you’ve done here though. Beautiful piece of art!
They’re much lighter and have a little more flexibility; they’re more forgiving on the skin, which can help to reduce the risk of nicks and irritation. The thinness also impacts feedback. With a thinner, more hollow blade, you can better feel the way the blade behaves and cuts the hairs. If there’s resistance when shaving, you’ll feel it more easily than with a wedge blade so you’ll know when the blade needs stropping or honing. However, the thinner a blade, the more fragile and at risk of breaking it is. You have to be careful not to over-hone the blade.
MashAllah really amazing to see this talent coming from Pakistan! And yes guys he's Pakistani you can check his channel section and socialblade too also his video where he melted coins were Pakistani coins.
Talent isnt a god given right. Talent isnt hereditary. Talent isnt something you born with either. Talent is a blessing from God, its a culimination of inner passion, vision and purpose. This channel is a clear demonstration of the remnants of polished talent, our brother has a skill that is unmatched. He demonstrates ancient to modern techniques in every video he makes. This is a demonstration of his gift from Allah(swt), his humility and his passion SubhanAllah. May those hands continue in your bid to leave your legacy Alhamdulillah...
The blade stopper inside the handle could be made slightly deeper to allow for the blade to be almost fully hidden inside the handle, other than that, top notch quality handcraft.
I love the simple little things he does to PERFECTO his stuff, List: using pen (kinda rare for someone to while making metal stuff* using drawings (also rare for someone to do) *using foam* (*Very rare*) using a small barrier for coal to help the item Doesnt use an anvil ( *since someone stole it ofcourse a rude idiot would steal* )
I remember using a buffer well at Clovis West high School back in 1976 if you have long hair you don't want to get near it some girl was using the machine her hair got in it and it sculpt her ripped the hair right off the top of her head and wrapped around the buffer wheel great video I want to see shave with it
Fantastic. If I can make one observation: next time you use charcoal for the heat treat, throw them in a cloth or trash bag and break them up with a hammer until you get 1/2" chunks. You get a better soak.
i watch these at night when im falling asleep while half talking to my friends and i wake up with the ability to conquer worlds
Hhhhh really me too 😂😂😂
Me too haha
Random words after Random Hands
ضيلو ض₩٠٢قاوت
4i.7
6
Seeing the steps to turning a rusting hunk of metal into something shiny, useful, and beautiful always gratifies.
😮😮😮😮
Just wanted to say that I really respect people like you, who actually masters crafts like these in modern times.
If society ever collapses, people like you will be the ones that can make the things we will need to survive.
Le compro una navaja igual
Lets admire the fact that he can actually draw a straight line
Its simple.
He used his finger as a scale.
@@Man_With_Brain. Even still its amazing
I have trouble using a ruler
@@bigjoe1137 same tho
Yes.
I love how he takes metal from items that would otherwise seem useless and after some forging, shaping and grinding it looks like something cut from a blank.
This guy can start his own company of luxury razors
This guy could sell a lot of luxury items.
He actually might make more money off of UA-cam. But I do wish he made the item and sold it too. But then again if I were him I might want to keep all of my work.
It's 100 shit! Look at the force he puts to cut the beards!
@@zenrazor659 why is ur name Zen "razor"??
@@c.i.a9685 I'm the master of the razors! I know every razors in the world also the garbage! I control the razor in every aspect. I have tried all the principal blades. I know all the razors in the world! I 'm the Master of razors! For me razor has no secrets!
Im iranian and when i see your work i love that your work is very beautiful and hard dont give up and keep up
To the people that disliked this ..Problly buy there stuff from China.. Real people truly appreciate handcrafted one off thing's.. This is amazing work...love it
I am watching this not only to see making these beautiful things, but to hear the sounds of making too
Qq
Loved how after you hammered the pin in, you managed to make it look like a whole piece by sanding it down!
He simply buffed it off. The final result made the re-beat vanish literally. Awesome man
People who know how to forge/restore stuff like that are wizards.
You cannot change my mind.
This guy gives bearings a seperate level of attention 👑
He is a man of focus...commitment...and sheer wowiee will.
He’s outsmarted his body.
Frfr
@@shreksswampsenseorhumanoid2457 No doubt.
They must have a harder steel, perhaps.
@@harissohail4536 гоолшгроош Ог а также в приложении зю
You are a genius and a fearless man. Hats off to the use of magnets and absence of safety gloves.
I must admit that I enjoy watching you make things from scratch much more than when you fix worn out old junk. I'm not sure why, because that's pretty amazing to see.
I enjoy watching you..
I am 70 years.. I am a woodwright.. thx
Junker: Most of the stuff here is a little rusty but-
RH: I’LL TAKE YOUR ENTIRE STOCK!!!
Random hands you great buddy
@@mabanagmc2628 i heard barbers 💈masturbated to this video
@@Tanmay_390 what is your problem man
@@epcls4592 that razor is looking sexy a f in that shiny golden leggings its wearing
Barbers are going crazy
15
A steel mirror would be a great complement for this razor.
Where is it, sir?
Plz send me your address it is, bro?
I like to buy one razor and one naif, cycling systeam.
@@Nurkabir123 de Ko Ko Ko
He can just make his own!! Just gotta grab about 90 to 95 pounds of sand, throw it in his custom-made metal foundry, heat it to over 2000 degrees, and boom! Custom-made glass mirror ready for use!
The fact that this guy can draw a straight line without any ruler or support to fist won me over.
ALEXSi🤔🕭
Ikr
in it
This craftsman not only thinks outside the box, I bet he could make a knife out of that box.
I was truly entertained by watching a geezer with mad skills.
That dude has an unlimited supply of rusty bearings i swear
Not wasting scrap materials n making useful items of every day. 🙏👍🙏 Continue efforts. tha.nks
Wow, what an awesome job! It's so good to see a true craftsman at work using his hands and basic tools! Job well done!
Ideal gift for any old-school barber!
Guys he's in creative that explains how he has so many rusty bearings
@tsunami of the tsunami shut up, clearly he’s in survival. He’s just got a bearing farm. You can tell it’s survival because he’s trying not to chop his hands off.
The people that always dislike this creativity, and the God-given and wonderful talent, what is your problem?
Yeah what is my problem
How many Rusty Bearings do you have? It seems to be an unlimited supply.
you beat me to it
He lives in the "RustBearing" capital of the world where knives, swords, and razors are used as money.....Cutbekistan!!!
Plot twist he is a rusty bearing and the supply is coming from his body
yea
Typically it is just junk but when you need it you dont find it. Same goes with leaf springs and other usefull 'stuff'. Today everything is recycled.
You are really artist
This man can literally change planet Mars, to planet earth!
your videos inspire me to try sharing them with military veterans who need something fantastic to achieve
As a barber, I really like this one💪💪💪
Se non l'avessi visto con i miei occhi non ci avrei creduto..... pura maestria. complimenti. saluti da Torino Italia
He is creative mode that's why he has so many rusty bearings
14 minutes of sheer enjoyment .many thanks.
Care for a close shave?
Heh, pun🤪
Sir i am a barber....this is the most sharp razor that i ever seen in my life....gud work sir...always...respect for u❤️❤️❤️
I'm a Master Barber Stylist, I've seen many razors but that one sir is the best I've ever seen, how can I contact you
He has an Instagram page that u can contact
And a Facebook page
The pages are in the description
But most importantly the craftsman is Indian.
@@pramilaranka9103 yahi chutiyapa kiya karo bas tum log. Thodi to sharm karo yar.
Je le jure que tu es un grand génie vraiment tu mérite 5 étoiles *****
Sou barbeiro e quando vi a notificação do seu vídeo , eu fiquei maravilhado , que trabalho espetacular !
Não creio....
E nois BR
ان محتواك وسكوتك يجعل جميع الناس تشاهدك عربي وجنبي مبدع ❤️
You have a store, or something like that, because I love what you do.
MY DAD IS A BARBER,SO, I REALLY APRETIATE THIS VIDEO.
NICE, REALLY NICE.
HI FROM MÉXICO...!!!
Is no one going to talk about how straight of a line this man can draw?
He used his middle finger along the top as a guide
@@steveallman6202 still. You have to keep your finger at a consistent angle the entire time or it will curve.
@@gabrielhenson5751 it's not that difficult dude.
Haha the joke on the last...made me really subscribe
that razor's so bright man almost made an accidental face reveal
He’s done many accidental face reveals
hes arab
@@laksoysoy thanks for the enlightenment very useful information there
@@monsternchips you're welcome bud
Your use of magnets and spray paint is genius!
Who else looks in the thing to try and see is face 😂
Me
Me
me
Me
@Dilbert Dildo Ok... But you don't have to be arrogant and call me an idiot
Incredible watching you turn scrap into gold.🏴
This guy inspired me. I have to make handles out of wood tho cuz brass is more expensive than I thought :)
الجهد الذي بذله في صناعة هذه الاله لا يعادل ثمنها ابدا😅😅
Happy to see such a talented Pakistani 🇵🇰
They show that how they use the minerals like iron after use as renew the rusted and waste iron into useful finished product. Keep it up......, We will always support you.
Wouldn’t the more traditional hollow ground blade have been better? I still appreciate the talent of what you’ve done here though. Beautiful piece of art!
They’re much lighter and have a little more flexibility; they’re more forgiving on the skin, which can help to reduce the risk of nicks and irritation.
The thinness also impacts feedback. With a thinner, more hollow blade, you can better feel the way the blade behaves and cuts the hairs. If there’s resistance when shaving, you’ll feel it more easily than with a wedge blade so you’ll know when the blade needs stropping or honing.
However, the thinner a blade, the more fragile and at risk of breaking it is. You have to be careful not to over-hone the blade.
I like your video bro. Keep it up
Lowkey wanted him to test the blade by giving someone a lineup
2:51 handling with magnet is a good idea 👍👍
My gosh I envy your metal skills. I work with wood, and have even surprised myself a few times, but this is remarkable. Thank you for sharing these.
I love your use of magnets to hold while grinding
👍😃
Liked! You've gotta have an unlimited supply of rusty bearings 😂
MashAllah really amazing to see this talent
coming from Pakistan! And yes guys he's
Pakistani you can check his channel section
and socialblade too also his video where he
melted coins were Pakistani coins.
Metals: **exists**
RH: *I CAN FORGE YOU*
You copied gecko’s joke, try again next time
I only watch this channel because it helps me sleep, like its relaxing and I just get to sleep with this videos
These videos are so calming & the workmanship is next level. Great channel!
Talent isnt a god given right. Talent isnt hereditary. Talent isnt something you born with either. Talent is a blessing from God, its a culimination of inner passion, vision and purpose. This channel is a clear demonstration of the remnants of polished talent, our brother has a skill that is unmatched. He demonstrates ancient to modern techniques in every video he makes. This is a demonstration of his gift from Allah(swt), his humility and his passion SubhanAllah. May those hands continue in your bid to leave your legacy Alhamdulillah...
"At last my arm is complete again!"
Is that a Sweeney Todd reference
Edit: lol didn't see ur profile pic
Yes.
Wanted to see the hardening and tempering process as well, but the finished result was beautiful.
Every time he cut his hairs
Meanwhile me who is thinking bro how ur hairs grows too fast 😂😂
This is my brother's Forearm today.
gf
Bigfoot
This is to cut 🧔🧔🧔 and not his 🦱🦱
Total gym
Total ģym
5
This dudes heaven is a scrap yard
RH: Buys rusted bearing
His armhair: "Here we go again"
I don’t get it
@@SoggySandwich80 q
Ha ha next time he’ll shave his chest 😂😂😂😂
LIKED: since i am already bald i may need a customized one from you sir you a highly talented.. no even better God given talent.
Wish to see barber cuts me with that 😂
Barber cuts hair and beards only 😜
Those typa blades cut billionairs 😅
VIKRAM VARDE and they use razors 😂
🤣😂
Ah yes Gremerr 2000
Beautiful. Metals are sooo beautiful.
Person tries to rob RH
RH: Ah a test subject finally!
When you hone and strop, flip it on the spine of the blade, not the blade itself. Turned out beautiful.
You look pretty cool saw your face through the shininess of the razor
Very very nice beautiful work that’s the best looking straight razor I’ve ever seen nice.
Of course I get this recommended to me when I’m listening to the Sweeney Todd sound track.
The blade stopper inside the handle could be made slightly deeper to allow for the blade to be almost fully hidden inside the handle, other than that, top notch quality handcraft.
That was the most amazing video I’ve ever seen.
Beautiful job the razor is functional and appeal to the eye.
“Someone get this man a anvil”
Glad someone else noticed that weird wobbly log lol
He's gonna make one himself with a rusty nail
He made Thor's hammer with an anvil
I love the simple little things he does to PERFECTO his stuff,
List:
using pen (kinda rare for someone to while making metal stuff*
using drawings (also rare for someone to do)
*using foam* (*Very rare*)
using a small barrier for coal to help the item
Doesnt use an anvil ( *since someone stole it ofcourse a rude idiot would steal* )
Ale świetna sztuka pozdrawiam twórcę tego filmiku i tego kanału na UA-cam 👍👍👍👍
I have been binge watching these awesome videos every night before bed and they are so amazing and impressive
As always shiny and perfect :)
Nicely polished
Imagine if the wind blew all those pieces of paper...🥲
I remember using a buffer well at Clovis West high School back in 1976 if you have long hair you don't want to get near it some girl was using the machine her hair got in it and it sculpt her ripped the hair right off the top of her head and wrapped around the buffer wheel great video I want to see shave with it
Well done, sharp and shiny, video shooting and editing are also good, worth learning
Definitely some big time ASMR vibes going down here
I swear this dude lives by a metal scrap yard or something 😂
A great work of art.
Plus, the razor is fully functional.
Wow wow wow... its amazing :)
Beautiful work!
imagine robbing this dude and he comes at you wit his Rusted BEARING Turned into a SAWED OFF SHOTGUN
Impresiónante!!!!! Ser creativo.... Unas manos de dioses!!!!!!!, 🥳🥳🥳🥳🥳😍🥳🥳😍🙏🙏🙏💪💪💪💪💪💪😍😍🥳🙏💪😍🙏😍😍😍🥳😍💪💪😍🙏🙏🙏💪🙏💪🙏💪💪🙏🙏🙏🙏💪💪💪💪💪💪💪💪💪💪💪💪
You should invest into a welding sticker. It's alot safer.
I am the Wordsmith
كم
Excellent workmanship.
[garbled radio broadcast]
"I turned the rusty bearing into a straight razor... A STRAIGHT... RAZOR..."
Nice dude😎😎 great skills
I couldn’t make this if it was given to me already made
Fantastic. If I can make one observation: next time you use charcoal for the heat treat, throw them in a cloth or trash bag and break them up with a hammer until you get 1/2" chunks. You get a better soak.