Do you want to vote for what gun I restore next? Check out my Patreon and you will be able to do just that! I will also be uploading an exclusive video on there very soon!
Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross. By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.
@@dove3853 Well Dove. I am already a believer and of course not worthy of the Father's unconditional love...but I know my place on Earth and my place with God. So thank you. :)
As a gun guy, I noticed you ditched the paper clip retaining pin and upgraded it with a real one. Cherry on top for me. One thing missing, rear sight aperture.
Yeah best part, you shot it in the end. Glad I watched the whole thing, I was like...black paint on the wood? But then, the golden paint emerges and it all made sense. Very nice!
@@razorkid456 there is a small primer at the back of the casing that explodes with heavy impact. pressing screwdriver into primer while bullet is aimed at your hand = very unfun time
@@Sacrifice117 definitely sarcasm. I don’t like any of these weapon demolition channels. Annoys me that the algorithm lumps them in with informative firearm content.
@@ndub5781 Yet here you are, interacting with it and even commenting. If you don't want to see more of this stuff, steer clear of interacting with these videos.
Next time, for removing rounds from a mag, remove the baseplate and then they will just drop out the bottom once you pull the spring/follower out. Then you won’t be pushing near the primer. Just an additional layer of safety.
@@MrOtistetraxyeah, gotta be careful with a couple decades old wet gunpowder, never know when slowly sliding them out, with no where near the force of an active pin, when one may pop off
@@MrOtistetrax he WAS being careful. This guy isnt some retarded dumbass. He's a professional who's skill is likely highly sought after in the restoration world. He probably has more knowledge about old guns/ammo than anyone commenting ever will
that screwdriver has nowhere near enough force to detonate one of those rounds. he is not ramming the screwdriver into the back of the round. he is using it to pry the rounds loose.
Century arms first imported these in 2014 and honestly this 1 was probably in working order. Had he put fresh rounds in that mag I bet it would have cycled. Might have been sticky on the first few rounds but after that I think it would have been fine
Yep, wondered how many days it soaked in salt water out of the box to simulate wear. The wood, the springs, and the firing pin were still excellent. Still informative, but not truly representative of ignored flood damage or a lake find.
Yeah I wouldn't be surprised if this entire channel was just a deep state honeypot trying to lure gun enthusiasts so they can make a target list for future raids when they come to take our guns away.
I restored one a few years back, you made it look quite easy to take the barrel out haha, anyways for those that don’t know, you would need a press to take out the barrel. Anyways amazing work!
Very satisfying video. I will say that I highly recommend PB blaster penetrating oil for breaking loose rusted steel. It'll take rust off a chrome hitch. Best stuff out there. Far suppress wd40.
@@sungukyun2608 Mil Spec Yugo AKs don't have that notch in the safety. The notched safety is either put on for export, or put on by the importer (Century Arms, for example). They are there due to the high number of US ranges that make you have the action locked back during cease fires. The welded muzzle thread protector, Tapco trigger, and Magpul mag indicate that is a US import.
I wouldn't be surprised if it would have shot after the barrel was cleaned out and just soaked it all in WD40 lol. The AK is probably the best designed and toughest firearm built. Outstanding job restoring it!!
Dude did you not know that wd40 will make it pop out like that? I tried it on 7 of mine... psl, rpk, ak47/74 saiga223.. gave them a good spray down and now I can quick change barrels... sheeet dog I got my rpk heavy barrel in my pap92. Just spray some wd40 on the trunion and they'll pop right out.
WHO doesn't trust them ??? This video shows EXACTLY why they are the only magazine I will buy. My mags will never see this kind of abuse yet he just cleans it up and it is right back in the game ... QUALITY 🤘🤘🤘🇺🇲🇺🇲🇺🇲
@@professionalschizo Thank you for your service. Greatly appreciated by my family and myself. And thanks for the info on the p mags. They are all I've ever used in my AR's and p80's.
This video came on feed randomly & I want to say this was so therapeutic to watch. I’m a young gun owner still learning but to see this was great. My first time watching your video. Had to sub !
Почему именно Магпул? Полимерных магазинов сейчас туева хуча. Учитывая что это югославский клон АК и весь в висюльках и шнукрах он явно побывал в лапах какого-то драг-нигги. А уже после провёл некоторое время в реке, возможно вместе с хозяином.
@infidel2013 хмм, потому что у меня 2 таких же магазина, только 5.45×39. От магпул. А эту заставу бросили в сырую грязь, высушили, предварительно заржавив составами после чего произошла "реставрация". Полежи он в реке, сгнило бы цевье и не налипло бы столько грязищи.
You can actually get a clue as to whether to expect a round in the chamber by looking through the cocking handle channel. If the hammer it's forward, it's unlikely a round is in the chamber. Because when the hammer comes forward, the round in the chamber is fired, bolt comes back and re-cocks the hammer. Now the hammer is back (where you can't see it) until the trigger is pulled again. The only way to have a live round in the chamber with an uncocked hammer is if the round was a misfire.
@@smashergrilla954 honestly though, if you just need to know a safe way to check would be to use a camera to film down the barrel. its the same as looking without the risk of applying a Christmas wallpaper
With that type of magazine you don't have to push the cartridge down at the front and slide to the rear. You can just push straight down on top and they will go in easily. Great video!
You can do that with all AK mags. Though, that generation of PMag does not have reinforced feed lips. Therefore, the way he is doing it reduces the stress on those plastic parts. His way is just different, not wrong, and actually probably better for that particular magazine.
I have a lot of questions. Firstly why blur the bcg? There's nothing there to hide. I want Brandon Herrera to go over this. I saw a lot of questionable stuff on I believe a deagle, or mac10? This whole "restoring" guns thing is fish af to me. I let this run long enough to post this, I hope you like this comment just as you did the last one and then pull your like. Edit: lmfao that barrel was that easy to get out? Just a little bit of wd40 and a good tug? Lol
Не смеши мои тапочки, аватар ерунду сделал испоганив оружие, превратив в детский раскрашенный пестик, разве что он его ещё разноцветным пластиком не украсил в цвета лгбт.
@@yuriistetsenko5948 настоясчім востановлєнієм ніхто не займатиметься. Якщо в автомат є влучання уламка кулі або він горів то його легше переплавити і зробити новий ніж намагатись полагодити.
I would love to know a little bit of history about each of the guns you restore in your videos. Where did you get it from? Why is it in such bad shape? etc.
Doesn’t mention it because it’s pretty clear he soaks a short while in a small container filled with a corrosive chemical. If this were for instance found after 10 years discarded in the ocean the firing pin and springs wouldn’t still be in perfect condition and barrel slid right out and arm strap /magazine is covered in same yellow rust from the body of the gun (meaning smal container)
Funny how they never explain how they aquire these firearms like fam you cant just lookup old firearms for cheap and find destroyed ones like these online for sale also them not being completely destroyed to the point that you cant fire them anymore even after restored means youd legit either have to find a river gun that was used to kill someone or you bought the gun and ruined it yourself to make a video. Which the last 1 is beyond me like why would you destroy an amazing firearm for a few likes? As for finding a murder weapon to restore if cops find out you own said weapon and its basically a ghost gun your kinda screwed 😂
Do you want to vote for what gun I restore next? Check out my Patreon and you will be able to do just that! I will also be uploading an exclusive video on there very soon!
Restore the FN FIVE SEVEN or The FN 509
СВД конечно же. Сам бог велел
M70 Yugoslav rifle
Oh no u killed that bucket , so cruel
👍🏻👍🏻
What is great about these videos. There's no horrible pointless background music. So peaceful to watch and enjoy the natural sound of whats happening.
True indeed
Do you really not know how to spell peaceful?
But that poor pot at the end. What did the pot do? You executed a cooking pot without a blindfold...Terrible.
Peaceful*
what's not great is he purposely destroys the firearms for content
SO satisfying that you actually shot it and not just showed in in slo mo. Thanks for that! Thumbs up for sure.
Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later
The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross.
By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.
@@dove3853 Well Dove. I am already a believer and of course not worthy of the Father's unconditional love...but I know my place on Earth and my place with God. So thank you. :)
It really is
@dove3853 In what way does your comment have any bearing on his comment or this video though?
@matthewanthony4269 just bots, that's how the lord spreads his message now
As a gun guy, I noticed you ditched the paper clip retaining pin and upgraded it with a real one. Cherry on top for me. One thing missing, rear sight aperture.
We’re all gun guys that’s why we’re here
@@ehsle8119 I'd say 80%.
@@TheCrazydata yeah, an MPAP
@@ehsle8119I really love Guns but I cant descrive me as one of you, because of my Not so good knowledge so...not every one here is a gun guy😔
80% gun guys, 10% FBI and 10% ATF
He fixed the gun so he can run a drill afterwards lol yall . I wonder who his opps is lol
Yeah best part, you shot it in the end. Glad I watched the whole thing, I was like...black paint on the wood? But then, the golden paint emerges and it all made sense. Very nice!
Grazie per questo bel videoclip. Fantastico questo restauro, fatto da mani molto esperte e capaci anche su armi moderne … veramente al 🔝👏🏻👏🏻🙏🏻
6:34 That screwdriver pushing against the back of the cartridge made a lot of us wince.
*primer
Really though that thing is pretty much just the firing pin. Not responsible AT ALL.
What do you mean by this? Genuinely asking
@@razorkid456 there is a small primer at the back of the casing that explodes with heavy impact. pressing screwdriver into primer while bullet is aimed at your hand = very unfun time
@@pabloveloso5790 ... which is at the back of the cartridge.
Gotta love those old, Soviet era P-Mags.
moe soviet mag lol
is this sarcastic or do you really think pmags are that old? real shame to see someone destroy a weapon for a video.
@@Sacrifice117 definitely sarcasm. I don’t like any of these weapon demolition channels. Annoys me that the algorithm lumps them in with informative firearm content.
@@ndub5781 Yet here you are, interacting with it and even commenting. If you don't want to see more of this stuff, steer clear of interacting with these videos.
@@jacketyt6992Not when theres a need to inform unsuspecting viewers of the inauthencity of the vids
Why was my first thought 700 Rubels when I saw the bullets all clean... Tarkov follows me everywhere...
Next time, for removing rounds from a mag, remove the baseplate and then they will just drop out the bottom once you pull the spring/follower out. Then you won’t be pushing near the primer. Just an additional layer of safety.
@@MrOtistetrax that’s what I thought! Aaaaarrrrgh!
@@MrOtistetraxyeah, gotta be careful with a couple decades old wet gunpowder, never know when slowly sliding them out, with no where near the force of an active pin, when one may pop off
@@ChrisSmith-5655 You’re right. Probably no need to be careful with live ammo.
@@MrOtistetrax he WAS being careful. This guy isnt some retarded dumbass. He's a professional who's skill is likely highly sought after in the restoration world. He probably has more knowledge about old guns/ammo than anyone commenting ever will
Good to know, thanks
Время 7 вечера, мне нужно делать психологию на завтра. Я зашёл на Ютуб, чтобы включить музыку для работы, а в итоге залип на твой видос!
Watching you push those rounds out with the screwdriver almost made my head explode
Ikr, either they are too old and nasty to fire or he is the luckiest man on earth and those bullets are incredibly dangerous
My bruh 💀 does he know how bullets work
that screwdriver has nowhere near enough force to detonate one of those rounds. he is not ramming the screwdriver into the back of the round. he is using it to pry the rounds loose.
@@Slava_Ukraini1991 still it’s not the wisest idea to do that
@@triggerfish4744 how else do you plan on getting them out?
sick resto. love that you actually prove it works too.
Oh you just stumbled upon an ancient AK-47 which happened to be loaded with a modern extended P MAG? Very believable
Was prob in a river rapid corrosion can happen like that
@Anon206 no lol he just took a gun and "corroded" it and then cleaned it up. It's satisfying to watch so whatever but it's also dishonest
Century arms first imported these in 2014 and honestly this 1 was probably in working order. Had he put fresh rounds in that mag I bet it would have cycled. Might have been sticky on the first few rounds but after that I think it would have been fine
@@1badombre82The action looked seized up. After the WD 40 I believe it would've fired without any further oil or cleaning.
no where does it say he found this.... how is it dishonest if there isnt a lie told lmao
I love that it's a quiet video with no music in the background
Good job👍👍👍💯
Yes
thanks for the tutorial! will use this next time i go down to my local river
I can't believe you cleaned the bullets! LOL!
Yes total restotation
As with most of such videos, it seems the gun has never degraded in a first place, but was rather made to look like one for a video)
Bingo
Yep, wondered how many days it soaked in salt water out of the box to simulate wear.
The wood, the springs, and the firing pin were still excellent.
Still informative, but not truly representative of ignored flood damage or a lake find.
@@joenunya8449 As always the first give away is there is zero pitting, any long term water damage will cause this.
Yeah I wouldn't be surprised if this entire channel was just a deep state honeypot trying to lure gun enthusiasts so they can make a target list for future raids when they come to take our guns away.
It's sad I had to go this far down to find this comment.
This is the most therapeutic video I’ve ever watched. Amazing job.
Very therapeutic
Get a life for god's sake
24:33 For a second I thought you wanted to restore the pot...
i'd love to see brandon harrera's reaction to this
Lmao someone needs to send this to him. He’d shit all over it 😂
I love how they let you assemble it in these kinds of videos. Normally it's a no go
Just wait will be taken down anytime soon
@@Idk-bw3ib 2 weeks later still here
@@birdwithands8104 UA-cam usually doesn’t take down restoration videos
@@axinhedgelion8417 yeah ik lol..I'm just making fun of the guy who said the video would be taken down soon
@@Idk-bw3ib 2 months and it is still up xD
I restored one a few years back, you made it look quite easy to take the barrel out haha, anyways for those that don’t know, you would need a press to take out the barrel. Anyways amazing work!
This is very true Jimmy Jackson
Good Job on noticing that i did too
Yeah but he was working with a ak from iraq they like to recreate ak 47 type ones alot
@@LilRicky1 This is a Yugo AK, not from Iraq
Made in Serbia
It said made in Serbia on the gun...
I enjoyed the restore. I wasn't a fan of the color scheme but I liked the finished project over all and it just worked so smoothly. Good Job
Great video, can't wait for part2. Restoring bucket with many holes!
Now restore the pot at the end.
Hell yea. That gun looks awesome. Good job bro.
That was an amazing video!! I have owned my AK-47 for years and you showed me some good tricks! Thank you
Ak 47 for what bro do you through you in call of duty or this toy gun 💀💀💀
Только это сербская копия под названием Zastava.. PS Братьям из Сербии Мира и процветания!
Привет брат из Београда 🇷🇺🇷🇸
Bro had fun at the end, I love these videos they make me happy Keep up the good work!! and so peaceful to watch
This video deserve millons of likes❤
I love the way you presented this information. It was clear, concise, and easy to understand.
I will bet that AK has a few stories to be told! Nice work!
No it won’t, he bought a new gun and faked it to look like this.
lol probably gang stories
@@IvNa13n20 its only a gold plated AK, what makes you think that? 😆
Shit was in bo2 campaigns lol
probably used in a war it says zastava serbia it could be from yugoslav wars.
Damn, this is an awesome channel!!.. so cool to watch stuff gets restored!
Best one yet! I would LOVE to see an old Israeli UZI, that would be amazing! Great Content!
Very satisfying video. I will say that I highly recommend PB blaster penetrating oil for breaking loose rusted steel. It'll take rust off a chrome hitch. Best stuff out there. Far suppress wd40.
My fellow blaster friend! Good to see real men still exist!! Lol
After the difficult day this is what I need. Thank you
Look like it was buried somewhere
Great job bringing it back
The Golden Gun
I love this video, finally somebody shot their gun and do real restoration 🎉❤🎉❤🎉❤
I honestly had no idea about the safety locking the charging handle. Thats really cool! Kudos to the restoration!
I believe only zastava AKs have that feature and they also have last round bolt hold open with their specific magazines.
@@sungukyun2608 Every AK safety will block the bolt from going back fully
@@averagecrusader5509 Yeah, but he's talking about the cut in the safety holding the bolt back, so that lowering the safety sends the bolt home.
@@PlopPlopMan Yeah, I figured that out, felt like a bit of an idiot, but couldn't find the comment to correct myself
@@sungukyun2608 Mil Spec Yugo AKs don't have that notch in the safety. The notched safety is either put on for export, or put on by the importer (Century Arms, for example). They are there due to the high number of US ranges that make you have the action locked back during cease fires.
The welded muzzle thread protector, Tapco trigger, and Magpul mag indicate that is a US import.
laughed so hard when he cleaned the bullets like DONT FIRE THOSE MAN
IF IT SEATS. IT YEETS
i mean, it was purposely rusted so they were kinda new i guess
Really!!
i'm not a gun guy but this is some of the most relaxing stuff i've seen in a while
@VanDerLinde1891 idk i brought one to school for show and tell once tho
Awesome restoration! I prefer the classic AK look myself but the gold one is also a pretty classic look due to popular movies.
made for the cartel
This is AKS-74U
@@ЭдуардВащенко-м6у it's not, it is chambered in 7.62x39
@@cecillioso it’s an aks47u
@@abbyiabs4344 I thought they are in 5.45x39 though
One of if not the best gun of the 20th century.
Nice work
I wouldn't be surprised if it would have shot after the barrel was cleaned out and just soaked it all in WD40 lol. The AK is probably the best designed and toughest firearm built. Outstanding job restoring it!!
its popular because its cheap and easy to get, because soviet scum been selling it to anyone with money, it's not even close to being best in reality
There's no way that barrel came right out of that trunnion without a press.
It came out smoother than a baby's ass
It's a scripted video 😂
Probably skipped thru it
Dude did you not know that wd40 will make it pop out like that? I tried it on 7 of mine... psl, rpk, ak47/74 saiga223.. gave them a good spray down and now I can quick change barrels... sheeet dog I got my rpk heavy barrel in my pap92. Just spray some wd40 on the trunion and they'll pop right out.
@@addy.is.live1 literally no script hahaha
I like the test firing at bayonet distance. Really makes it feel like you’re ending a rival cocaine dealer
been watching your restoration videos a long time gj again
The fact he hit it with wd-40 and that bolt slid and the magazine ejected; that’s a testament to the Ak’s design and durability
The sling being attached to the triggerguard is also a testament to Tyronedavionontaviousthe3rd's ability to be stupid as fuck.
I can almost garentee that all he needed to do to make it fire was spray a lil wd40 on it
@@thischannelisbackon5679omg 😂😂😂
it is not ak it is zastava m85
The bolt hold-open notch on the safety/fire control lever is something I hadn't seen before today.
Zastava ❤️
Serbs are the best in everything. You’re welcome.
@@Rossiya_Serbs_are_with_you. Made me laugh, thank you :D
This dude just finds weapons magnet fishing doesnt report them and restores them lmfao 😂 that shit def got bodies on it
Honestly I’m stuck between what you said or he purposely lets weapons rot outside and then fixes them for content
😂😂😂😂
This is my favorite one so far I love ak 47 and ar15. U did a great job on the entire thg.
Very nice work. Those P mags, I know people don't trust them, but I've personally never had one fail.
The two questions are how humid/wet is your area and how cold?
WHO doesn't trust them ???
This video shows EXACTLY why they are the only magazine I will buy. My mags will never see this kind of abuse yet he just cleans it up and it is right back in the game ... QUALITY 🤘🤘🤘🇺🇲🇺🇲🇺🇲
I only use mag pulls myself cheap and great quality
@@professionalschizo Thank you for your service. Greatly appreciated by my family and myself.
And thanks for the info on the p mags.
They are all I've ever used in my AR's and p80's.
Same. I did start loading mine 28 instead of 30 to keep the pressure down though just in case
It was awesome watching the workmanship!! Dope outcome!!
Not my first choice in finishes but NICE JOB overall!👍👍
I was thinking the same thing but overall, very nice
How in the world is he able to do that good of work. Amazing job. Love the videos!
That pot didn't stand a chance! Nice work, very neat project.
My question is where do you get all these rusted guns? Do you rust them yourself? Do you soak them in vinegar and salt to rust them?
Dnt…ur trolling just watch da video
@@brandonwilliams9353Trolling or speaking truth? lol
This is a prime example of why you ALWAYS treat every single firearm as if its loaded. Can never be too careful
my dad always tells me that! even with nerfguns
@@SageWinner98937 #1 rule of firearm safety
007 golden gun!! Reminds me of the 007 Golden eye game AK-47! Great video!
bro was pushing out the bullet with the flat head in the pin 😂
Not the color choices I would have went with, but nice work! Was that a recovery from a 'terrible boating accident' in a fresh water lake or stream?
santas gun,but great work
Just beautiful work. Well done !
You a bad man !!!! Outstanding work great video
23:25 WOW! You did a great job cleaning that ammo. Those rounds look brand new.
Because they are brand new lol
@@Phoenix-zq8cb damn
He boxed them also
brah😐
This video came on feed randomly & I want to say this was so therapeutic to watch. I’m a young gun owner still learning but to see this was great. My first time watching your video. Had to sub !
как же я люблю этих реставраторов. Пародия на ак выглядит так, как будто 40 лет в песках Афгана валялся, а магпзин Магпул
Этот реставратор даже понятия не имеет про легендарное оружие . Покрасить калаш в цыганский золотой цвет это мог только ебанутый американец .
Почему именно Магпул? Полимерных магазинов сейчас туева хуча. Учитывая что это югославский клон АК и весь в висюльках и шнукрах он явно побывал в лапах какого-то драг-нигги. А уже после провёл некоторое время в реке, возможно вместе с хозяином.
@infidel2013 хмм, потому что у меня 2 таких же магазина, только 5.45×39. От магпул. А эту заставу бросили в сырую грязь, высушили, предварительно заржавив составами после чего произошла "реставрация". Полежи он в реке, сгнило бы цевье и не налипло бы столько грязищи.
@School_of_baby_phonk может быть и постановка. Цевьё кстати может быть и пластиковое.
@@infidel2013 дерево, просто посмотри на пистолетную рукоять и на цевье. Фактура материала разная
Harbor Freight has taken You-Tube channels to a whole new level
А зачем его чистить было? Он и так стрелял бы😂
You can actually get a clue as to whether to expect a round in the chamber by looking through the cocking handle channel. If the hammer it's forward, it's unlikely a round is in the chamber. Because when the hammer comes forward, the round in the chamber is fired, bolt comes back and re-cocks the hammer. Now the hammer is back (where you can't see it) until the trigger is pulled again. The only way to have a live round in the chamber with an uncocked hammer is if the round was a misfire.
Naw bro easiest way to check if there is a round in the chamber is just look straight down the barrel
@@smashergrilla954 Or better yet, just pull the trigger. If you hear a "bang", that means there was a live round in the chamber. Problem solved. 😆
@@smashergrilla954 lmao ooh lord
@@HamSandwich277 right lol
@@smashergrilla954 honestly though, if you just need to know a safe way to check would be to use a camera to film down the barrel. its the same as looking without the risk of applying a Christmas wallpaper
Start to Finish..Awesome Work
Awesome job! Did you choose to blue the inside rather than paint to avoid any tolerance issue that thicker paint might cause?
The AK laughs at tolerances
What is the blue stuff?
@@TheeWilsonator blueing compound
Dude purposefully trashed it just to clean it thinking people wouldn’t know lol
Who's watching this video 2024😅😅
😃👍
Onb me 😂😂
Dat Drac!!
I'm looking at it since 2030
I’ve looked at the video for eternity
Great job, you've killed the pot! 👍
With that type of magazine you don't have to push the cartridge down at the front and slide to the rear. You can just push straight down on top and they will go in easily. Great video!
You can do that with all AK mags. Though, that generation of PMag does not have reinforced feed lips. Therefore, the way he is doing it reduces the stress on those plastic parts. His way is just different, not wrong, and actually probably better for that particular magazine.
Ficou muito top essa restauração! 👏🏻👏🏻👏🏻👏🏻👏🏻
Very nice! Some poly on the wood would give it a nice glossy finish. That’s the only thing I would’ve done differently!
Amazing restoration, very calming to watch your craft
Maybe it's wrong of me, but I was really hoping to see the new paint on the receiver get its first scratch by actuating the safety selector.
He did. I can't believe he painted that beauty and he didn't fine sand the internals after sand blasting them smh
So you buy a gun, load it, then throw it into a pong for a week, just to take it out and "restore" it?
Better than doing a 9 to 5 underpaid job if you ask me
it was probably thrown into an acid bath to look like that.
Все верно!
Damn that was dope I was gonna say I wish he painted it but you did 🔥🔥🔥 good seeing a Machine specialist put that work in
I have a lot of questions. Firstly why blur the bcg? There's nothing there to hide. I want Brandon Herrera to go over this. I saw a lot of questionable stuff on I believe a deagle, or mac10? This whole "restoring" guns thing is fish af to me. I let this run long enough to post this, I hope you like this comment just as you did the last one and then pull your like.
Edit: lmfao that barrel was that easy to get out? Just a little bit of wd40 and a good tug? Lol
I'd guess most gun restorations are staged. At very least this dude stages his restos.
Im a bit sceptical of this video too
@@slightlyaboveaveragebutaverage can you explain on what this video as been staged ? just curious
Why many parts are pixelated?
That’s what I’m saying
Fully auto vs semi-auto.
Hell of a shot... From 5 feet away!!! Lol . Don't like the gold either, but other than that you did a outstanding job my friend!!!
GTA AK
this video restored my marriage i love you so much :)
Built as a raw and beautifuly practical weapon with very few stoppages in it's day. Nice job sir.
Very nice!! black and gold looks awesome on it
Сперва испачкал за кадром, потом отмыл на видео. 11 миллионов просмотров. Не плохо))
Заметь это не ак 47
Это Акс
@@белый-е2щ нет. это акс 74у
@@белый-е2щ это вообще не АК
@@белый-е2щ Ак 47 не существует ! АК 74С (АКС) имеет калибр 5.45×39. Мальчик ты хоть в армии служил ?😂
All I can say is this gun is my favorite!
18:47 THIS is just so beautiful !!! ✨✨
Благодарю мастера за отличную работу! Все сделано с душой и качеством. Автомат получился лучше чем новый. Спасибо за труд. Удачи на канале. 📹🛠️👍🔥
Не смеши мои тапочки, аватар ерунду сделал испоганив оружие, превратив в детский раскрашенный пестик, разве что он его ещё разноцветным пластиком не украсил в цвета лгбт.
@@АлександрШмат-ъ3е теперь автрру надо дырявую кастрюлю реставрировать🤣
@@yatodante1664 хахахха
@@yuriistetsenko5948 настоясчім востановлєнієм ніхто не займатиметься. Якщо в автомат є влучання уламка кулі або він горів то його легше переплавити і зробити новий ніж намагатись полагодити.
У старого ак новый магпуловский магазин?! Так себе реставрация
I wonder if that gold paint gonna hold with the heat. Good job well done 👍
They sell paint that is heat resistant?
@@DurzaHD yes. Automotive applications usually. For transmission covers, head covers etc.
Hi Saber
LOL - No, it won't last on the barrel or gas tube.
It's not
This is the first time this AK was ever cleaned, impressive.
Can't have been that old with a P-Mag in it
Lol true
who said it was old?
With SAW-Style pistol grip
Its 31 years old gun
Not even an Ak-47, that's a Aks74U
Bro restored a Draco
6:34 I’m worried about the ammo got impacted to explode，is it really safe to unload those ammo this way？
I was thinkin the same thing. Then when he took the base plate off & the spring did its spring thing, I kinda thought, ooohhhh that’s why😅😅
Pointy item not normally advisable. Using the rim of another case is common.
У него мозгов нет, но он знает, что делает. Себе во вред.
I love your videos dude,,,extremely relaxing!
keep 'em comin!
you do great work
I would love to know a little bit of history about each of the guns you restore in your videos. Where did you get it from? Why is it in such bad shape? etc.
Doesn’t mention it because it’s pretty clear he soaks a short while in a small container filled with a corrosive chemical. If this were for instance found after 10 years discarded in the ocean the firing pin and springs wouldn’t still be in perfect condition and barrel slid right out and arm strap /magazine is covered in same yellow rust from the body of the gun (meaning smal container)
Probably evidence locker auction from a police department. Guns found in rivers aren't uncommon.
Funny how they never explain how they aquire these firearms like fam you cant just lookup old firearms for cheap and find destroyed ones like these online for sale also them not being completely destroyed to the point that you cant fire them anymore even after restored means youd legit either have to find a river gun that was used to kill someone or you bought the gun and ruined it yourself to make a video. Which the last 1 is beyond me like why would you destroy an amazing firearm for a few likes? As for finding a murder weapon to restore if cops find out you own said weapon and its basically a ghost gun your kinda screwed 😂
Not at all, go read the laws man
Ghost guns are legal in certain states
@@3KS_Liljay223 yes, but our constitution protects them, thus they should be legal in ALL states, but you know how crooks are.