Thank you for this video! With this information I was able to disassemble my Galaxy Watch and replace the side buttons. Works like new again! Now I just need to find a new seal for between the housing and bottom plate. During disassembly it broke.
I am taking part out, my screen digitizer work, screen lcd works most of the time, sometime turns orange but behind color the touch function and all work well, someone mention it is the battery but I think maybe lcd ... no damage other than I was used in a pool lap swim many times then one day while changing this started, intermittently it is perfect but when it is color orange it cannot be brought back unless you just wait and it flickers orange and normal, I will check ribbon for being loose but I think maybe it is the lcd...
Hi Sir i have watch 4 classic 46mm. i had an issue with the water lock option. samsung decided to change the motherboard to solve this issue. May i know it the watch will open then close again it will work perfectly under the waterproofing looking for your kind support and cooperation
Hi, Thanks for the great video. When one tech guy from phone fix store, tried to install a replacement battery, the watch's charging shows progressing but watch never turns back in. (Charge is at 80%). What could be wrong?
I had that too when replacing the side buttons. I just did not solder one of the connections properly. So, it could be that the power button is somehow damaged.
Hi, there! The cable with sensors is placed inside the back cover. The sensors are glued into the cover and can be removed quite easily by heating. Use a heat gun.
buenas, he comprado uno reacondicionado pero estaba pensando devolverlo por que en teoria pierden la resistencia al agua. seria factible desmontarlo uno mismo y con la cola adecuada recuperar la estanqueidad? lo necesito para nadar. Muchas gracias
hola, muy bien video, y sobre todo la calidad y resolución!! muy bueno, tengo un dramon con un reloj, el SM-800, es de mi cuñado, el tema es que se le cayó y se le trizó la tapita de atrás y el sensor cardiaco dejó de funcionar... compro piezas nuevas y se las cambié, incluso sensor nuevo, todo ok, pero el sensor sigue sin funcionar, corre la app sin problemas pero no lee nada y tampoco emite ninguna luz, que crees que pueda ser?
Hola, Quizás el sensor en sí está dañado o el cable en el que está ubicado. Debe desmontar y ver la causa del mal funcionamiento o pedir un cable de este tipo con un sensor para su reemplazo.
Buen video, amigo tengo el problema que el bisel de mi reloj Samsung Gear sport esta flojo, desajustado, abara un video como para algun caso similar como el que tengo? o algun consejo? te agradeceria tu respuesta. Saludos.
@@Vrm24com muchas gracias por responder. Si si funciona, pero esta como flojo, como desajustado, como que se fuera a caer, no estaba así, pero con el tiempo se fue poniendo flojo, y tengo miedo de usarlo para no dejar la argolla del bizel tirada en la calle, y de donde yo soy no conozco a nadie que repare este tipo de reloj
Bien, el bisel se inserta tan apretado que no conozco un ejemplo del reemplazo correcto y limpio. Es mejor reemplazar toda la carcasa, pero desafortunadamente no sé dónde comprar.
Thanks for a great video. Don't be afraid to narrate your work as you're fixing it, it would help. So my son was playing with his son and he leaned on the watch against the floor. Screen is acting erratic. Lines and acting weird. Is it only the screen that needs to be replaced? Do you have a video on how to? Thanks!!
Hi, we can't find such a smartwatch model. If this happened exactly after the update, try to update the device again or wait to release the fixed version of the software. I hope after the update, everything will work as before.
My watch says it's overheating right after I turn it on. I purchased the new battery but I believe the four screws are stripped. Any idea how to get them out?
Hola, no, el reloj no es resistente al agua. Espero que hagamos una publicación al respecto pronto. Tenemos muchos de estos relojes en reparación después de sufrir daños por agua.
Hey,i Would like to know why my GW46(without lte) is overheating. Ive couldnt turn on my watch one day, ive put it on original charger, Samsung logo came up and 0% battery info,then after few seconds it dies. I was trying to turn it on but the same effect. Ive buyed second battery ,replace it and everything works but now its heating so much ,that it only stays turned on only few minutes, then info shows up that the watch is overheating and turns of. Do You know and solution to solve this problem ? Greets from Poland !
Hi, thank you! Had those cases before, several times. Due to a liquid penetrated through the microphone hole. Disassembly, the sensor microcircuit removal, cleaning the contacts, and installing the microcircuit back solved the issue.
@@Vrm24com mucho gracias. One last question. What do You think about getting bigger ,1000mah battery for this watch ? They are available on allieexpres, the prize is reasonable, and it fit in the oryginal bracket. Have you ever performed such an operation ?
@@Vrm24com , I'm having the same problem. The power button is ok, but the other button it's not working at all! Is it possible to be just a bad contact problem or do I need to replace the button?
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Thank you for this video! With this information I was able to disassemble my Galaxy Watch and replace the side buttons. Works like new again! Now I just need to find a new seal for between the housing and bottom plate. During disassembly it broke.
Thank you for the video. How do we fix barometer/altimeter sensors? Do you have any idea?
can u help me fix my speaker on my galaxy watch
How do we fix barometer/altimeter sensors? Do you have any idea?
Can you show how you replace the back button ribbon cable?
Loved the guide for desassembly, but had to mute the music.
the flex cable for back button is reemplazable ?
Hi. Is there a way to replace the front glass without replacing the whole screen? Thanks
Is it possible to ROM for the watch because the watch needs software?
Thank you for the video.
Thanks for watching! )
Thx Galaxy watch battery repair 👍👍👍
Thank you for the video. How do we fix if the touch screen not working? Can you help me sir? Thank you. My watch is GWA2🙏🏻
Thank you very much 👍
You are very welcome!
pleass,,solution bluetooth smartwatch sm r800.?
Does the gear s3 and galaxy watch have the same display and are the connectors ?.. Is it possible to swap between the two?..
I am taking part out, my screen digitizer work, screen lcd works most of the time, sometime turns orange but behind color the touch function and all work well, someone mention it is the battery but I think maybe lcd ... no damage other than I was used in a pool lap swim many times then one day while changing this started, intermittently it is perfect but when it is color orange it cannot be brought back unless you just wait and it flickers orange and normal, I will check ribbon for being loose but I think maybe it is the lcd...
What's the port on the side
Super cool
Mine won't load, even with a new battery, new charger and new loader so is it possible to know which part I have to change plz?
Hi Sir
i have watch 4 classic 46mm. i had an issue with the water lock option.
samsung decided to change the motherboard to solve this issue.
May i know it the watch will open then close again it will work perfectly under the waterproofing
looking for your kind support and cooperation
What is the gold contacts for inside of the little cover you removed on the side of the watch
Hi, what time is it?
@@Vrm24com 1:05
i need answer for that too :D
How do you clean the microphone port?
Hola!
Que buena calidad de tutorial, sabrías como puedo cambiar la cinta numérica que viene entre el bizel y el display?
HI do you fix smartwatches¿? I have a problem with heart rate monitor. I believe are the sensors, could you help? Is a samsung active 2
Hi,
Thanks for the great video. When one tech guy from phone fix store, tried to install a replacement battery, the watch's charging shows progressing but watch never turns back in. (Charge is at 80%).
What could be wrong?
I had that too when replacing the side buttons. I just did not solder one of the connections properly. So, it could be that the power button is somehow damaged.
It need screwdriver Y size 0.6mm?
Hi, it is Y00 screwdriver I guess 2.0mm
Hi, Could you please show that how we can replace the heart rate sensor and flex as I have ordered replacement online. Thanks a lot in advance.
Hi, there! The cable with sensors is placed inside the back cover. The sensors are glued into the cover and can be removed quite easily by heating. Use a heat gun.
@@Vrm24com Thanks a lot mate, Legend.
Where i found the main o-ring ?
Hi, I saw it on Chinese web market Aliexpress - there is a lot of sellers
is there any possibility in extending its storage?
¿Hay alguna solución para el sobrecalentamiento del reloj Samsung R800?
Is there a fix for the overheating of the Samsung watch R800?
buenas,
he comprado uno reacondicionado pero estaba pensando devolverlo por que en teoria pierden la resistencia al agua. seria factible desmontarlo uno mismo y con la cola adecuada recuperar la estanqueidad?
lo necesito para nadar.
Muchas gracias
Thanks!!!!
What is that opening 00:59 for what ?
Hi, there are test contacts for a service center.
hola, muy bien video, y sobre todo la calidad y resolución!! muy bueno, tengo un dramon con un reloj, el SM-800, es de mi cuñado, el tema es que se le cayó y se le trizó la tapita de atrás y el sensor cardiaco dejó de funcionar... compro piezas nuevas y se las cambié, incluso sensor nuevo, todo ok, pero el sensor sigue sin funcionar, corre la app sin problemas pero no lee nada y tampoco emite ninguna luz, que crees que pueda ser?
Hola, Quizás el sensor en sí está dañado o el cable en el que está ubicado. Debe desmontar y ver la causa del mal funcionamiento o pedir un cable de este tipo con un sensor para su reemplazo.
Cordial saludo, amigo, quisiera saber que diámetro debe tener el destornillador y00.
Muchas Gracias.
Mi gustaria mucho tanbien
Buen video, amigo tengo el problema que el bisel de mi reloj Samsung Gear sport esta flojo, desajustado, abara un video como para algun caso similar como el que tengo? o algun consejo? te agradeceria tu respuesta. Saludos.
Hola, ¿qué tipo de problema con el bisel? ¿Funciona?
@@Vrm24com muchas gracias por responder. Si si funciona, pero esta como flojo, como desajustado, como que se fuera a caer, no estaba así, pero con el tiempo se fue poniendo flojo, y tengo miedo de usarlo para no dejar la argolla del bizel tirada en la calle, y de donde yo soy no conozco a nadie que repare este tipo de reloj
Bien, el bisel se inserta tan apretado que no conozco un ejemplo del reemplazo correcto y limpio. Es mejor reemplazar toda la carcasa, pero desafortunadamente no sé dónde comprar.
Thanks for a great video. Don't be afraid to narrate your work as you're fixing it, it would help.
So my son was playing with his son and he leaned on the watch against the floor. Screen is acting erratic. Lines and acting weird. Is it only the screen that needs to be replaced? Do you have a video on how to?
Thanks!!
Hi, could you tell me please my watch Samsung D631 doesn't count steps anymore and heart rate doesn't measure after updating, how can I fix?
Hi, we can't find such a smartwatch model.
If this happened exactly after the update, try to update the device again or wait to release the fixed version of the software. I hope after the update, everything will work as before.
My watch says it's overheating right after I turn it on. I purchased the new battery but I believe the four screws are stripped. Any idea how to get them out?
Hola, muchas gracias por el video. Sabes si es posible reemplazar sólo el cristal frontal en lugar de la pantalla completa? Muchas gracias
Hola, pierde la resistencia al agua?
Hola, no, el reloj no es resistente al agua. Espero que hagamos una publicación al respecto pronto. Tenemos muchos de estos relojes en reparación después de sufrir daños por agua.
@@Vrm24com Donde puedo ver 👀 el mio no prende luego de que se entro el agua.
@vrm24 I wonder if the water resistance is lost after this repair.. I'm willing to replace my board and I'm wondering about this..
Hi, when reassembling we use a sealant B5000/B7000/T7000 to glue the parts used to be glued on the manufacturing line.
hai ... what is the board number code for this smartwatch, or else, do you know where to buy the board only ...
Hi, just check the board on Aliexpress, use the model name.
eb-br800abu I think is the battery. anyone else know any better. Either way your paying to much for a 20 pence battery and a custom flex pcb.
Hey,i Would like to know why my GW46(without lte) is overheating. Ive couldnt turn on my watch one day, ive put it on original charger, Samsung logo came up and 0% battery info,then after few seconds it dies. I was trying to turn it on but the same effect. Ive buyed second battery ,replace it and everything works but now its heating so much ,that it only stays turned on only few minutes, then info shows up that the watch is overheating and turns of. Do You know and solution to solve this problem ? Greets from Poland !
Hi, thank you! Had those cases before, several times. Due to a liquid penetrated through the microphone hole. Disassembly, the sensor microcircuit removal, cleaning the contacts, and installing the microcircuit back solved the issue.
@@Vrm24com could You send me a video of the cleaning proces?
Honestly, we have a video/pics series about phone water damage and repair. We will prepare/upload them for UA-cam and our website soon.
@@Vrm24com mucho gracias. One last question. What do You think about getting bigger ,1000mah battery for this watch ? They are available on allieexpres, the prize is reasonable, and it fit in the oryginal bracket. Have you ever performed such an operation ?
what is the size of tri-star screw driver ?
Hi, 1.5 or 2.0 mm
Does it have wireless charging
Hi, it has wireless charging.
@@Vrm24com then what was the magnetic charger thing.... 1.05 minutes
@@aadityasingh2153 System contacts for testing.
@@Vrm24com whats the use of it?
@@youcan2981 For firmware to update/renew software.
I love guitar but this music is no good
👏👏👏👏
Howto fix samsung watch buttern not work
Hi, do you mean buttons don't work totally?
@@Vrm24com , I'm having the same problem. The power button is ok, but the other button it's not working at all! Is it possible to be just a bad contact problem or do I need to replace the button?
Como puedo conseguir la rueda giratoria de este reloj
Hola, ¿quieres reemplazarlo?
When we saw repair: ALCATEL 1V 5007U???
Hi, I hope soon. We will do our best.
it does not work at all
How do you remove bezel