since I have the rail kit I mounted the top 4 brackets to the panels hand tight so I could then slide the whole thing under the rail kit and then put the rail kit bolts back trough the rail and then through the panel brackets! total time was about 3 minutes though I painted the hardware black as well ! have several of the JCR after market parts for my JT and all have worked out great!
Too bad the rotopax mounts don’t work on the side panels…I have the full molle set front and both sides. My initial plan was to mount traction boards at the front panels rather than the sides so they wouldn’t interfere with the wheel well and would sit flat. Then was gonna stack rotopax one on top the other on one of the side panels. Bought the mounts and they won’t mount/screw in on any part of the side panels. Now I’m forced to mount them up front like in this video. Gonna have to figured out something else for the traction boards now
what size rotopax are those 3 1/2 or ? the setup you have is exactly my goal for mine! Will be ordering a side molly and this front one in the next 24 hours!
since I have the rail kit I mounted the top 4 brackets to the panels hand tight so I could then slide the whole thing under the rail kit and then put the rail kit bolts back trough the rail and then through the panel brackets! total time was about 3 minutes though I painted the hardware black as well ! have several of the JCR after market parts for my JT and all have worked out great!
Looks like a good product, I would have those bolts/screws black in color, not silver.
Well done. Helpful. Just got mine delivered from ups yesterday, have my morning post-coffee project ready. Great quality product.
Too bad the rotopax mounts don’t work on the side panels…I have the full molle set front and both sides. My initial plan was to mount traction boards at the front panels rather than the sides so they wouldn’t interfere with the wheel well and would sit flat. Then was gonna stack rotopax one on top the other on one of the side panels. Bought the mounts and they won’t mount/screw in on any part of the side panels. Now I’m forced to mount them up front like in this video. Gonna have to figured out something else for the traction boards now
Thanks!!
Do ARBs traction boards clear 🤔
You guys need to find out a way to make an overhead console for the XJ.
Is there a way to lock the hi lift for anti theft?
Hello.... I just want to note that a 3 gallon Rotopax DOES NOT work with your front MOLLE panel AND the Mopar front Trail Rail.
Will this work for a 2023 JT? Also where can I buy the rotopaks that will fit this?
Yes, it will fit a 2023 JT. You can purchase Rotopax directly on their website or from one of their distributors.
what size rotopax are those 3 1/2 or ? the setup you have is exactly my goal for mine! Will be ordering a side molly and this front one in the next 24 hours!
2 Gallon.
@@JcrOffroad thanks!
Are you guys contemplating a bed mounted lightbar that has been popping up on some builds?
When are you making molle stuff for the YJ?
Looking for handheld radio holders.
www.jcroffroad.com/product/JLCCMP.html
First
That's original
Bring Daryl back!