F30 BMW Front Axle Output Shaft Replacement (How to fix a broken BMW F30 Axle!)
Вставка
- Опубліковано 25 жов 2018
- Hey Everyone,
Today, we're going to show you how to replace a front axle or output shaft on an F30 BMW. Now, I hope you never have to do this, because it's not cheap, but if you do, hopefully, you'll find some tips in today's video.
Need one for your car? Check out www.FCPeuro.com
Need to do this? Here are some helpful tools!
🔧 amzn.to/2q805VY 🛠
Here are some of the torque specs, I'll add more..
Output Shaft to Wheel Hub 210nm
Wishbone to front axle support 100nm
Anti roll bar link to front axle support 28 nm
Anti roll bar link to anti roll bar/spring strut 56nm
Thanks for watching and please try everything at your own risk. If you’re interested in a professional installation by Kies Motorsports, please click here: www.kiesmotorsports.com/pages...
ALSO, Scroll Down ⬇️ for:
🏎 BRYAN’s BUILD
📬 Kies Contact Info
📽 Kies Motorsports Video Playlists
🛠 Recommended Tools, Gear, and EXCLUSIVE Kies Partner Deals!
🌎 And More!
Bryan
Bryan Kiefer
President
Kies Motorsports, LLC
Hammonton, NJ
Info@kiesmotorsports.com
www.KiesMotorsports.com
Authorized Dealers and Installers of: ProTuningFreaks BootMod3, BimmerTech, AWE Tuning, Evolution Racewerks, CSF, Pure Turbos, Fuel-it, Studio RSR Roll Cages, MST Performance, Burger Motorsports, VRSF, Bilstein, H&R, Injen, Borla, Dinan, GoFastBits, Depo, VMR Wheels, BBS, Sparco, Snow Performance, Nitrous Express, AFE, Akrapovic, Eibach, Hawk, Fifteen52, Koni, KW, Seibon, Stop Tech, Vorsteiner, Wagner Tuning, Wilwood, and many more incredible brands!
🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎🏎
BRYAN’s BUILD 👇🏼👇🏼
Click Here to see links to EVERY PART on Bryan’s Build! 👉🏼 www.kiesmotorsports.com/pages... 👈🏼
📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬📬
Contact:
Website: 🌎 www.kiesmotorsports.com 🌏
Contact: 📩 Info@kiesmotorsports.com 📩
Instagram: 📸 kiesmotorsp... 📸
Facebook: kiesmotorspo...
DRIVETRIBE: 🚔 drivetribe.com/t/SpEBj-8EQESm... 🚔
Twitter 🐦 KiesMotorsports?l... 🐦
📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽📽
Click below for Playlists of Kies Motorsports videos that will cover Performance, Aesthetics, Retrofits, and even Vlogs!
Click here for ALL of our Playlists!: 📽 bit.ly/KiesPlaylists 📽
🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠🛠
Click here for Tools, Camera Gear, and Exclusive Partner Deals!
Tools, Camera Gear and More! www.amazon.com/shop/kiesmotor...
Exclusive Partner Deals: www.kiesmotorsports.com/pages...
🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰🔰
Special announcement! ProAutoMotion is now a part of Kies Motorsports! Find all the ProAutoMotion products you love at www.kiesmotorsports.com - Авто та транспорт
I own an F30 and love these videos but even if I didn't I think I would watch them. I did follow your guide for the carbon fiber vinyl wrap interior. It turned out great. Not sure how you only have 42k subs.
Hey just wanted to say thank you this video helped me alot today. Ended up not having to take of the caliper when I did it, but this video was a HUGE help and saved me alota monies!
I did this job on my previous car. Getting the axle out was a PItA. I wish I had that oversized fork! Nicely done
Amazing . Perfect speed . Just what i like every step explained with great attention to detail . I have slight play up and down and was hoping to just change these tripple bearing and end by the whell.
My mechanic warned me how expensive the output shaft was. I avoided every slight dent in the road like the plague afterwards. Glad to know they really know their stuff.
Very helpful ... couldn’t ask for a better teacher
This guy should have so many more followers
Hey Brian I have a x1 35i with the same "new style" allen bolt CV joint and all I had to do is remove the two ABS sensors,the link to sway bar nuts and take off the four sway bar bolts. that's it. The half shaft comes out towards the front with the wheels turned max. On the passenger side, because the shaft is so long, you need to jack up the suspension so the half shaft can be taken out horizontal, that way it just clears. Keep up the awesome vids.
Looking forward to this. I had my axle replaced and rotors. Is it weird that everyone I reverse my bmw in a 90 degree angle I hear a weird noise because of it?
Great job Thank you very much
Great video👍🏿
Hi. Its great video, but you can only replace the boot (BMW original) and put new grease after cleaning everything. In Poland this inner cv joint tripods are also available for 35 USD. I’ve made it in my F36 🙈
Can't wait for the rear wheel hub bearing or axle shaft DIY. Probably more involved than the front axle.
Just broke my rear passenger axle!
Great info...I just did my brakes on my f30 328i, thanks to your video.
Would you do a Front and rear sway bar upgrade one day ?
Where did you get those blue front bumper reflectors matching the car color.
Random question ? 🤔 can you drive an ( xdrive - f32 ) without cv axles ? Or axles period
One more thing: since the suspension is still there and in the way you can't use the mallet technique to pop the CV back in. So I held the ball end with both hands and hit the inner part with it once it was properly started in the differential. The rubber booths keep the two ends apart and there is about an inch of play. That gives enough impact to pop the snap ring in place : )
perfect amazing
can you just replace the bearings for the F10 and put a new boot?
sorry how much Nm need for 'cooler' bolt in the end, didnt fint info in the links !?
Do you need to replace the shaft seal ?
How hard is front hub bearing on an f30 xdrive.
Need the whole output shaft bad !!! Not trying to pay for an oem one though !!!
where did you get part whats link to part ?
Where can I get a rear wheel bearing hub for BMW f30 335xi?
i broke that plastic piece and thought i could replace it . i dont see it on real oem listed as a part now im thinking it wasnt supposed to be broken if just changing cv boots, is there anyway to fix it?
Hi can you tell me the best way to remove the rear output shaft please
who to buy brake cover like this in this video the yellow?
thanks
Can you send me the link to buy the axle driver side f30 2013
Great video what is the torque specs for the center nut
210 nm plus 90 degrees of rotAtion
Don’t forget that if you remove the inner side of lower control arm for this that when put it back on you tighten it up about 90 percent while in the air and when you set the car down finish tightening that up 100 percent
I had broken right side outer Boot . It will be OK if I replace new Outer CV Joint only instead of whole new Front Axel ( with outer and inner CV Joint)?
Same here. I can't find a single video of to just do the boot on these cars... Maybe it's to easy?
Another quick tip if you dont have anyone to hit the brakes to torque axle nut then stick a screw driver through rotor vents and it will get wedged with the caliper and stay in place so you can torque the axle down i did this on my e46 too many times 😪
Another trick is to put the lug nuts/bolts back on, then place a prybar between two of them. Place a jack stand level with the prybar. It will keep the rotor from spinning
How to do the rear one ?
So what's the "very high torque rating" the collar nut?
Chris S 210 Nm + 90 deg
Can u do a cv boot replacement? Outer boot specifically
Help! I'm looking for the same video.. maybe it's so easy that no one wants to record it??
I have done the driveshaft replacement
But I cannot fit the strut back in for the life of me
Any help
Look at the axle boot on the output shaft, pull on the axle, you will see the joint separate inside the boot, now try pushing it back in, notice it will only mesh completely in certain positions. Rotate your brake disc, push again, and keep rotating till you can fully seat the axle. Now do that while trying to put your strut back in in a position where the cv joint cant be pushed in completely, hope that helps.
push me to the edge, all your links are dead.
btw
do u sell m sport steering wheel with buttons nd stuff?
thx
17MM ALLEN LETS DO THIS!
My axle keeps popping off after an accident. Its my 3rd front right axle. I barely drive it 10-15kms and it pops right out. Anyone has suggestions?
Something else is probably broke or bent
Broken axle support. It’s common. It’s prob cracked.
seems like a bitch to have an Xdrive if something fails :D but im sure its handy in other situations :D