I have just installed this lock and it seems well made, like every product, reviews are mixed. With a bit of thought Yale could really improve this lock especially on the software side. I wouldn't say it's a total smart lock, unless you have the z module, would be nice if that was included along with the hub. But at the moment I am happy with it.
Hi Anthony, I get your point. It would be nice for it to come complete for first-time buyers but this would put up the price and if you already have the hub, you are then wasting money. So I think it would be nice for a lock on its own with the option of a starter kit would be best. Ie a cheap z wave hub + z wave model. Or at least make it easier and clear where to get them. Yale does have the SR-Hub & Module 2 Kit but I can not get a link for it and I have not tried it so would not want to recommend it at the moment. I can only recommend the Samsung SmartThings Starter Kit amzn.to/2Kaxv2T with the Z-Wave Module 2 amzn.to/2WQisNr as I have tried it and know it works. Thanks for your comments wish you all the best and keep well. David
Hi Elton As long as your current lock is a multipoint euro lock then no drilling is needed. See this part of the video, setting the fixing locations ua-cam.com/video/8_OnJTmXasE/v-deo.html and ua-cam.com/video/8_OnJTmXasE/v-deo.html so no need to drill new holes. I hope this helps. Kind regards and keep well David
Hi Paul I don't know where your comment went :( "How wide is the handle? I can't find measurements anywhere and want to know if it will fully cover my old handle or if it's thinner it will expose old paint" It's a good question so I will post it here. Outside Width = 36mm Hight 276mm Inside Width =36mm Hight = 386mm I only quickly measured mine so might be out a bit so use this as a guide. You can always paint the door before you fit it, which may be best if you are thinking of repainting it in the near future. Hope you get to see this. Take care and keep well David.
Hi Momin, Thanks for you comment on my video about the Conexis L1 Smart Lock and that it was what you were looking for and encouraged you to get one. I see you also do your own UA-cam videos :) I have subscribed to your channel and will be keeping an eye out for your take of lock. Kind regards and keep well David
When the custome decides to change the main opening codes on the unit, can the key cards and tags be updated with the new codes? or do they need to be replaced with new ones? Cheers!
Hi Firebrand, I am not following what you are asking as there are no codes with this lock only authorised keys either as accounts on a phone or NFC tags. If you reset the lock you loose all soft keys and will run out and need to buy new ones which I do not agree with. NFC tags are reusable. I will be releasing a new video about a different lock so subscribe so you can see it when it is relaced. As I think this is what you are looking for. All the best Dave
I bought the Yale access bridge and it just will not pair. I must have tried 20 times. All i get is the message "You do not own any locks that support bridge. Please install your compatible smart lock first". This is the problem, I have installed the wifi module into the Conexis L1 and it is working on the app via bluetooth ok. I can unlock and lock the door fine with the app. It's the bridge that is the problem. Can you help or offer any advice. Thx
Hi Alex, great to hear from you. Have you pressed the button inside three times to start the module? Try watching ua-cam.com/video/eJEPmeE8BC0/v-deo.html as this may help. I am using SmartThings and zwave but should be the same process. Your phone is likely communicating with the lock via internal Bluetooth instead of WiFi at the moment and not using the module at all. I hope this helps please let us know how you get on. All the best Dave
@@AlsKitchen Hi Alex, The video you sent me looks like you are scanning the wrong QR code. First make sure your hub is less then 3 meters from your door. Power up the hub and set it up. Then try pressing the button in the lock three times in quick succession. If you need to scan any QR codes it will be on the lock modual and or the hub itself or in the documentation that came with it. Not a photo on a tablet even if this is a photo of your device the image may corrupt the QR code enough to change the data in it. When scanning QR codes make sure you only have one code in the scan area and keep the item you are scanning on a flat service not your other hand as this will give two much image shake. I hope this helps, let us know how you get on. Dave
Hi Leigh, Yes you have to lift to lock! It’s a replacement of your current lock so works the same way. If you press and turn the internal knob, use the app or key fob to unlock the door with out pushing the handle down. It will automaticity lock without being lifted again! This is because when you start the unlock process before you push down on the handle it only is engaging or disengaging the locking mechanism not moving the multi point locks around the door. Only the internal handle mechanism. I would love it to automaticity fully lock the door remotely but I am going to guess this might require a more powerful motor, bigger batteries and how would the lock know if the door is fully closed? But would be an excellent feature. All the best Dave
Hi Pyle Well that is an open ended question. For us I would say yes, as I like having the peace of mind on checking if the door is locked whilst out. Also I now seldom bring any keys or wallets when I am out as I just use my phone for letting me back in when I get home and for contactless payment. My wife likes being able to unlock the door from upstairs to let someone in as she is disabled and can take time getting downstairs so with the SkyBell she has the confidence to open the door remotely. She also loves being able to check that the door is locked while in bed. We both love being able to unlock the front door from the worm dry inside of the car in winter and then just go straight in, no fussing at the door. So for us, yes we love it. But I can see some people would be happy with a simple key, no battery, no internet or WiFi no problem. As for security all locks are just deterrent to stop the opportunist from walking in, so far there is not much publicly on how to hack the Yale lock so brute force is most likely which will probable mean they with use the window instead of the door being a multi point lock. Glad you enjoyed our video, wish you all the best and keep well. David
Hello I have this smart lock. And the sound has changed. Does that mean there is something wrong. Do I need to reset the handle if the batteries are failing. Many thanks
Hi Chantel, If it is playing few beeps after unlocking or locking the door then it is warning you the batteries are low. Just replace the batteries all settings are saved in the lock so you will not need to reset anything. Even if the batteries completely die and you are outside with the door locked you just need a 9V batterie and press and hold it to the contacts at the bottom of the outside lock and you will be able to get back in as normal. Hope you clicked like and subscribe :) All the best Dave
So I’ve just purchased this door lock, however, the app is now no longer in use and it directs you to the Yale home app. My problem is I have no qr code to can and when I enter the serial number it doesn’t allow it. So therefore I can not access the app functionality
Hi User-yg6cs1cn8h, Yale are closing the old app and doing a new one which can be found www.yalehome.com/global/en/trusted-innovation/yale-apps/download-yale-home You may well need to get a new module in your lock and attach your DoorSense™ Magnet as well which you can get from yalehome.co.uk/yale-access-module-upgrade/ I hope this helps. I have now moved to using the Loqed smart touch lock ua-cam.com/video/8aVovYLc6lc/v-deo.html All the best Dave
Hi Dan Yes, Open the app and click the key icon top right, Click My Locks, Tap for Settings, Click Cards/Tags Select the one you have lost Click Remove. Done I wish there was a way to suspend the key so you can reactivate it once found instead of having to add it back. Wish you all the best and keep well David
Hi, A good question. The app only allows you to be logged into one phone at a time with that soft key. You install the app on a new phone and login, it will then ask if you want to move your key to the new device, once you confirm the move is done. The key will still show up on the old device but will not work just in case the phone was lost or stolen. Hope this helps.
I appreciate this video is 11 months ago but how are you finding the lock. Can you lock it remotely on your smartthings app? Would be interesting to see smartthings functionality with the lock. Great vid, thanks.
Hi Hammy, I am finding the lock to be relay good, especially in winter. I sit in the car and use the app to unlock the front door. That way I spend less time in the rain. Pore me ... I also like having the ability to check to see if I have not left the door unlocked when out. It's nice to have the reassurance your home is secure so you can enjoy the day. Your not the first to want to lock the door remotely and I am sure most of us want this option. However it is not possible with this lock as it's lift to lock. The motor just disengages or engages the handle after the handle has been lifted. I have done a video of the Yale Conexis L1 Lock working with z wave and SmartThings here ua-cam.com/video/eJEPmeE8BC0/v-deo.html Glad you liked my video, Kind regards and keep well David
@@BrenTeckITSupport Hi David, Thank you for taking the time to reply. I am considering getting one myself, thanks to helpful videos like yours. I hadn't even thought of that extra assurance knowing if the door is locked! I'll check out your other video, thanks again.
Hi Busyswizzler, I don't know about the ultion lock so I can not say how that one will be, only the Yale Conexis L1 Smart Lock. As for any lock on a stable door design, I really can't say. I know UPVC stable doors exist as I have seen them but not taken one apart yet. So all I will say if it's using the standard multi-point and lift to lock then I can't see why they won't work. If you want to be sure asked the door manufacture if they are compatible. Hope you had a lovely Christmas and wish you all the best for 2021 David
Hi Leo, I do not think you can, and I would advise against it if you could, as an audible warning of the lock working or not as the case may be is better to have than not. The beeps are not that loud compared to the door being closed anyway so they will not disturb anyone sleeping. It may sound louder in my video due to the amplified mic. I hope this helps, all the best David
@@BrenTeckITSupport You can actually disable the beeps, or have them quieter, it's done in the advanced lock settings in the lock, that's also where auto relock time, shutdown time, and wrong tag lockout time limit are set too, at least in my app anyway. I'm very curious how you did the firmware update you mention though, if you can remember; my understanding is that you borrow a currently unobtainium 'update module' from Yale, is that how you did it, or is there a a hidden way via the app or a download from somewhere? Mines a very old firmware that I'd like to update if possible.
@@Tekwyzard Hi Ken, Yes you are very right about looking in the advanced lock settings thank you for your input on this topic. I can not remember exactly how I did the firmware update, I know I used my phone and had over-the-phone support from Yale. Possible something to do with Samsung smart things I really can not remember but I know it was not obvious and you would not stumble on to it. Looking at some online forum posts it looks like you have to send the lock back for a firmware update now Mar 2021. I can find anything official from Yale about this. I will contact Yale and see if I can find out for you.
Hi Sahim, You can register extra fobs at any time. There is no charge for setting up fobs other than the purchase of them. Soft keys are per account only, unfortunately. I hope this helps, kind regards and keep well David
Nice lock but I'm afraid it's going to wake people up when I leave early in the morning, is it very loud ?can you turn the bleep off ? How are you getting on with it since May cheers
Hi Daz, Hope you had a good Christmas. Are you meaning the quiet beep the lock makes, or the app on your phones? If you mean the lock itself No. But it's not that loud in real life, the video makes it sound louder as I have an amplified mono-directional mic aimed at it. It's no louder then closing the door behind you as you leave. If you mean the app then yes. There are two easy ways of doing this. 1. Turn off the Play Unlock Sound in the app. Click the gear icon, Notifications, Play Unlock Sound. That's what I have done along with Unlock Vibrate. 2. More complicated but good to have and get to know. Download MacroDroid from the play store play.google.com/store/apps/details?id=com.arlosoft.macrodroid&hl=en_GB Add macro, Date/Time, Day/ Time Trigger, (set when you want to turn off ALL notifications sounds, Actions, Volume, Volume Change, Sent any volume you want on any or all sliders, Tick and give it a name and press OK Then do it again and set the volume high. Now at night the volume on the phone goes down and back up in the morning. Play with this app it's Free for five macros at a time I believe. You can start making more automation with it. I find it very useful and easier to use then Tasker. If you want I can make a video on how to do this if it helps. Wish you all the best. Dave
Hi literally did everything like you did but mine after installing and all kind of bleeps when put handle down and up the last bleep when it shows its lock doesn’t come up neither red light. So i cant move to next step and register card. Any suggestions?
Hi Abc. It could be a trapped / pinched lead as this causes all sorts of weird problems. I suggest taking the lock off completely and starting again making sure to use the cable run space, also make sure the bar is the right length ua-cam.com/video/8_OnJTmXasE/v-deo.html ua-cam.com/video/8_OnJTmXasE/v-deo.html I hope this helps please let us know how you get on. Remember to Like, Share and Subscribe. All the best Dave
@@BrenTeckITSupport so i take the whole lock down start again and it was the same so i send it back to Yale and they called me apologise for inconvenience and send me new one which i paid more for installation…. The old/original unit was ok but bluetooth wasn’t working so it was manufacturer issue.
@@AbcAbc-ch4mq Hi Abc, if ever in dought it's best to get a professional installer in for any job. Shame about the Bluetooth not working from out of the box but these things do happen. This could have been the issue don't know why you would be told the old one was ok but Bluetooth not working this means there is a fault and so the lock is not working as expected LoL. Well, at least you got it all sorted now. I love having this lock the number of times I would have locked myself out as I often forget to pick up the key fob when I leave but never forget my phone so I can always get back in. :) All the best and thanks for your comments Dave
Hi David, Thanks for that, you know I don't think I noticed the squeak until you pointed it out. Humm another jobe for me to do if I have not done it already. Thanks a lot lol :( Take care and all the best. David
Hi David. Great review! Could you please answer this question for me. I often leave my front door open as I have a stainless steel mesh security screen that I keep locked, allowing a breeze to flow through the house. If I leave the door open/ajar for a long period of time, will the Conexis be OK, or will it beep at me incessantly? Thank you, - Mike.
Hi Mike It will beep ones waring you the door is open but I think it then stops. I certainly have not noticed it more than that. I hope this helps, kind regard and keep well David
thanks for the full walk though.. do you know if it is possible to turn down the volume of the notifications on the door.. (not wanting to wake the whole house if leaving to work early).
Hi, Are you meaning the quiet beep the lock makes or the app on your phones? If you mean the lock itself No. But it's not that loud in real life the video makes it sound louder as I have an amplified mono-directional mic aimed at it. If you mean the app then yes. There are two easy ways of doing this. 1. Turn off the Play Unlock Sound in the app. Click the gear icon, Notifications, Play Unlock Sound. That's what I have done along with Unlock Vibrate. 2. More complicated but good to have and get to know. Download MacroDroid from the play store play.google.com/store/apps/details?id=com.arlosoft.macrodroid&hl=en_GB Add macro, Date/Time, Day/ Time Trigger, (set when you want to turn off ALL notifications sounds, Actions, Volume, Volume Change, Sent any volume you want on any or all sliders, Tick and give it a name and press OK Then do it again and set the volume high. Now at night the volume on the phone goes down and back up in the morning. Play with this app it's Free for five macros at a time I believe. You can start making more automation with it. I find it very useful and easier to use then Tasker. If you want I can make a video on how to do this if it helps. Wish you all the best.
@@BrenTeckITSupport Thanks for the quick answer! I meant the beep from the door electronics itself when registering an unlock. So it's not so noisy... Thanks.
@@Oceansteve Hi, I would say it's nice and quiet. However, that is subjective. Plus people are good at filtering out repetitive noise that is unimportant so if it does wake anyone up they should get used to it jut like the kettle clicking off when you make your tee/coffee. I hope this helps. David
Hi Alan, sadly no you must manually lift the handle to engage the multipoint locks. The motor only allows the handle to be active or deactive. You must also push the handle down to unlock the door after telling the lock to unlock otherwise within about 30 seconds it will disengage the handle again. So if someone is at the door and you want to let them in remotely you must have the zwave module installed first. You can use the Samsung smart things app to activate the handle. The person can then push down on the handle to retract the multipoint locks and open the door. To lock the door, the person must first close the door and lift the handle fully. The motor will then disengaged the handle so the door can not be opened again. The handle must be fully pushed up otherwise it will attempt to disengage the handle but will fail and the door can still be opened, if using zwave and Samsung smart things the status of the lock should also show the door unlocked if this happens. I hope this helps. I can do a quick video about this when my new tripod arrives. If you like. Dave
BrenTeck IT Support hi Dave, thanks so much for your detailed reply, this is exactly the kind of detail I was looking for in my investigations into whether to consider smart locks (I'm a complete gadget geek and smart locks are about the only thing left 'to do' in my house). I always wondered about the push up functionality, I suspected that smart locks, being only battery operated, couldn't really do the pushing up, I figured they must only disengage the handle or something like that. Your explanation was really helpful, I may still go for them but at least now I'm much better informed. Cheers, Alan
@@BrenTeckITSupport My door currently doesn't have multi lock mechanism. So when I close it behind me then the handle can still be pushed down to open. Am I right in understanding that with this, the unlock feature enables the handle to be turned downwards? So even if I don't have a multi lock door I can use this to effectively lock the door behind me because the handle can then not be pushed down again unless I unlock it?
@@kalelkar Hi Saager, The lock will not work for you what you want is the Yale YD-01-CON-NOMOD-CH Keyless Connected Ready Smart Door Lock amzn.to/2TKKtpi Sorry for the delay the app did not show me your message. I am still getting used to running the channel, I have a lot of catching up to do apparently. Hope this helps David
Hi George, A good question. The simple answer is Yes you can us one key tag/card on multiple locks. I called their support to find this out as it's not clear online. The full answer is; Each lock must have one and only one master phone account. Each lock can have up to 50 key tags/cards to open them. Each phone account can have any number of locks to work with. Each key tag/card can work with any number of locks. Kind regards David
I seem to have the same thickness PVC door as in your video 45mm. The distance from the inside to the centre of the lock is 23mm. According to the book it says I need the short tailbar but in your video you have used the long one. Can you please clarify which is correct? Thanks
@@georgevarsamis4554 Hi George, I believe that I had to use the short one in the end and Pack B. The Tailbar I am NOT using is 54mm The problem I had is I did not use the cable run the first time and so the lock was not sitting correctly. Sorry for the delay in my reply, the YouTub app only shows me new comment threads, not new comments. So I am missing out on comments even though I check every morning. :( Hope this helps, if you need any more help please fill free to ask and good luck fitting it, hope you have fun. David
Hi Michael Yes, Yes I would recommend the Conexis L1 Smart Lock. It has never let me down, I do keep a 9V battery in the glove box just in case but as long as I replace the battery when it gives me the warning beep it will be good to go every day. I am finding the lock to be relay good, especially in winter. I sit in the car and use the app to unlock the front door. That way I spend less time in the rain. Pore me ... I also like having the ability to check to see if I have not left the door unlocked when out. It's nice to have the reassurance your home is secure so you can enjoy the day. To unlock the door using the app you need the z wave module which I have done a video of the Yale Conexis L1 Lock working with z wave and SmartThings here ua-cam.com/video/eJEPmeE8BC0/v-deo.html Hope you had a lovely Christmas and wish you all the best for 2021 David
Very helpful video well done. There is one question: I have same lock as your original lock, is it possible to use another lock rather Yale conexis L1? For example Ultraloq UL3?
Hi, Sorry for not getting back to you earlier. The simple answer is no. The Conexis L1 is for a "multipoint lock" with a lift handle to engage all locking points and the motor retracts the locking system to disengages the handle. I hope this helps. So if you are wanting to upgrade then you will need the Conexis L1 amzn.to/2JGkxsJ.
ERA used to do an electronic lock that had a keypad on, it was rather chunky and I don't think it connected to WiFi or Bluetooth, that was a few years ago they may have a new product now.
My only whinge is that, unlike others, there is no way to configure it to unlock when your smartphone's wifi comes within range. So you either have to get your phone out to use the app (awkward if you have your hands full or if it's raining etc) or get the fob/RFID card out and hold it on the sensor. I have not found a suitable alternative but will jump ship as soon as possible if I do. (Edit: see my reply to my own post below where I have very successfully used a SmartThings hub and Z-Wave module to get around this limitation. MW).
Hi Martin, Sorry, you are having problems with yours. Make sure your batteries are fully charged / new alkaline. I get away with rechargeables but they are not recomended. Also, make sure no wires are trapped/pinched as this can cause a communication problem. You can have it unlocked via geofencing or wifi connectivity using events in Samsung SmartThings, Google Home, Alexa or using HomeAssistant but this is a lot more work to get working and I don't recommend doing it as we found that our door unlocked when phones restarted or power on when at home. The door will relock after a minute or two if the leaver was not pushed down so not supper critical but still a security flore. The best practice is to use the NFC fob. If it's raining we unlock the door using the SmatThins app so we can walk strat in from the car. I hope this helps and thanks for your comments. David
@@BrenTeckITSupport Hi David, I'm £200 in so I might as well go the extra mile. Would I need the 'sync module' and the 'Yale Connect Wi-Fi Bridge' *and* one of Samsung SmartThings, Google Home, Alexa or HomeAssistant? If so which one (of the last lot) would you say is best for my geofencing needs (I probably won't use the 'talk to it' thing much but you never know...).
@@BrenTeckITSupport BTW, am I right in understanding that there is an alternative synch module that isn't wi-fi-based but one which uses z-wave comms instead?
@@martinwinlow Hi Martin, OK This is going to be fun to explain as things have changed since I got ours and did the video. You will need a sync module of some type; 1. I used to recommend the Z-wave 2 module with smart things. BUT this has stopped working with home assistant due to updates and SmatThings is now rebranded. It still works great using the SmartThings APP. 2. Aeotec Smart Home Hub - UK version amzn.to/3mZ1qwl which is SmarThings rebrand + Yale SD-M1100, Smart Door Lock Z-Wave Module 2 amzn.to/31M7eBm. 3. Or The Yale Wi-Fi Bridge + Access Module amzn.to/3BVRBDH The new Yale Connect Wi-Fi Bridge + Yale Access Module may be a better starting point amzn.to/3BVRBDH but I have not tried it so can not say how good it is or if it offers anything over the Aeotec Smart Home Hub - UK version amzn.to/3mZ1qwl which is SmarThings rebrand. Smart assistance such as Google Home, Alexa or HomeAssistant are not needed to use the module and app to unlock the door remotely. Geo-fencing the lock was not a great experience for me. With the updates I don't know how well it will work now as when I did it I used Stringify that no longer exists :( I did not move it over to HomeAssistane as I found Geo fencing the lock to be unreliable from "my" phone. To do Geo fencing you will need a 3/4th party such as Alexa routines, SmatThings or IFTTT to track your location then respond to the change. Home Assistant may work with the new Aeotec Smart Home Hub amzn.to/3mZ1qwl or even with the old SmartThings if starting from scratch. The SamartThings updates just broke the security. There is a Yale smart living integration for Home Assistant but I have not tried it. I am now using a ZigBee dongle with Home Assistant directly to overcome the problems with SmartThings but this does not support Z-Wave and I do not know what the new Yale Access Module works on as I can not see in their documentation. It may be ZigBee, Z-wave, Bluetooth, the new Matter standard or WiFi who knows. I am sure this is not as helpful as you were hoping for but just my experience and with the new Matter standard coming out soon all could change again, have fun. David
@@martinwinlow Hi Martin The new Yale Access Module amzn.to/3kjOYWi may be ZigBee, Z-wave, Bluetooth, the new Matter standard or WiFi who knows. The old one was Z-Wave amzn.to/3CYZr0Q works with Aeotec Smart Home Hub (SmartThings) amzn.to/3klhIxS Regards David
Hi Anthony, I don't know if the Conexis L1 can use ZigBee, where did you see this? This is why I recommend the Yale Smart Door Lock Z-Wave Module 2amzn.to/2WQisNr as I know it works. Yale does there own Z-wave hub. But I recommend the Samsung SmartThings Starter Kit - White amzn.to/2Kaxv2T as it gave us more devices to test and have around the house. Keep well and all the best David
@@BrenTeckITSupport I am not sure where I read it, but one site I came across said it was Z wave and ZigBee compatible. I have decided to use the module 2 and Samsung hub version 2.
Good installation video :-) Did you manage to add the "skill" to Alexa? Keeps telling me my email and / or password is incorrect even though it exactly matches
Hi AberdeeAl, In a word yes. I don't think I recorded it and ever use it. I prefer Google Home Assistant and SmartThings. First of, make sure your details are ExAcT as it could be case sensitive and check you have got Num Lock off if using a keyboard without a number pad. Is your Amazon account associated with the right country I remember this causing me a problem for something in the past? To check/change region: 1. Logged in to your Amazon account in a desktop browser. 2. Go to Accounts & Lists > Your Content and Devices > 3a. Preferences and click the downwards arrow to the right of Country/Region Settings to view your current country. 3b. You may need to click "Learn more about updating your default Kindle Store to Amazon.co.uk" 4a. Hit Change and enter the new address you'd like to associate with your account 4b Click Transfer your Kindle account to Amazon.co.uk Doing this will change a whole host of Amazon settings and preferences so take care before changing it. Kind regards and keep well David
Hi, I gave them a phone call for you and found this! Yes, you can when setting up a new soft/shared key. (Not the fob or card) Also can not be added to an existing key it must be done at the time of creation. To Schedule time Keys: - When sending a sub user a shared key, there is an option o send them a scheduled or permanent key - Permanent key will give access to the user all of the time - Scheduled key will give the sub user access only during specific times the master user sets To set up a scheduled key - Type in the email you would like to send a key - Select ‘Scheduled Key’ - Select the start/end time you would like to enable the key fore - Underneath it will ask you to select days which you would like the key to be valid from and what date. Please see picture www.brenteck.com/images/YaleScheduling.png
Hi Shuaib A soft key is one in the phone app. You have to buy one for each account / user. They are not transferable between users or reusable which is a shame. You can put them on a new phone but only one device per key (user). So if you want to give someone regular access to your property I suggest using a key fob or card and they can hand it back when needed. If they don't you can deleted the key to stop it form working till you get it back. When setting up the card / fob you can add a time it can be used, but only during setup. I hope this helps. Kind regards and keep well David
Would be great if someone could do a troubleshooting video. Had this lock for around two years and for reasons unknown when I close the door the confirmation chimes now ring multiple times instead of the once like it used to do and the only way to stop it is to push the internal button to the right after locking. I've tried resetting it to no avail. Just annoying
Hi Tom, I think this might be warning you the batteries are running low and to replace them now before they get to low to reliably operate the look. It does start waring you well in advance so you may not sport the correlation between the double chime and batteries dying. I hope this helps. Kind regards and keep well, David
@@BrenTeckITSupport Thanks for your reply. It is definitely not the low battery chimes and I put fresh ones in just in case. It is the door close chimes. When closing the door they used to chime once but now they chime multiple times for about 2 minutes unless you turn the internal circular button to the right to stop it. Wondered if anyone else had a similar problem.
Humm, ok could you not be lifting the handle enough, or the door just slightly ajar stopping it from looking property? If it's not this than give Yale support a call This help page looks very useful so try this there is a sample of sounds but all are short. help.yale.co.uk/advice/product-support/smart-door-locks/conexisl1/ Telephone: 01902 364 606 Email: info@yale.co.uk
@@BrenTeckITSupport . I have been all over that site and it really doesn't help. Yale are known for having very poor support and not replying to emails anyway the problem is annoying but I can live with it. Thanks all the same.
@@tomaharbowx Hi Tom, I have been extremely busy this month so sorry for the late reply. If it's not the handle being lifted fully or the door not being fully closed fully. It could be a traped lead or another fitting problem such as not enough room for components to move or the wrong bar insert. It could be worth opening the lock again and refitting it to make sure it's all correct. Good luck and let us know how you get on. Kind regards and keep well David
My lock sounds like it is having trouble locking and then when it does lock, it doesn’t actually stay locked. Any advice ? Or faulty product. Many thanks
Hi Shezan I found ours does this from time to time, Not the locks fault but mine! If I just let the door close on it's own and don't push it fully shut and or do not lift the handle fully the lock fails to engage. This is to be expected as I have not fully closed the door! You are probably experiencing the same thing. When it sounds like it is looking for a longer time than it should, give the door a shove and lift the handle fully. See if that helps. Kind regards and keep well David.
Hi Kevin, Yes, I know what you mean but if you already have a lift to lock setup then you should be used to it. It's just a simple lift to lock and all done no key needed. But I do wish there was a motor to do remote locking for though of us who forget to lift to lock or if we let someone in to drop off a package, walk the dog etc and wanted to make sure the door was locked after. I guess it would take more battery power and a bigger motor to do it. Thanks for watching and commenting, keep well. David
Hi Peter, the Conexis L1 is only for multipoint locks. So If your back door is multipoint UPVc door like my front door then yes. However, if you have a French patio door I don't think so as looking at mint it does not look to have enough room to fit. Tilt and slide doors would definitely not work with it. It might work with sliding doors depending on your mechanism. Best bet is to contact yale directly www.yalelock.com/en/yale/com/menu/contact/ I hope this might help. I just found a compatibility guide. www.yale.co.uk/Yale/Yale_co_uk/Smart%20Locks/Conexis/Conexis%20L1%20Template%202017-2018.pdf and help.yale.co.uk/is-conexisl1-compatible-with-my-door/ David
Hi Malcolm, You use a 9V battery on the outside of the lock. There are two metal contacts at the bottom. I keep one in the car and one in the garage. It works well as I have had to use it twice as I wanted to see how long after the battery low warning chime it would work for, it varied between a few days to a week. Hope this helps. David
Hi Joe, Yes, I still recommend the Conexis L1 for multipoint locks. I have just had a quick look at the new Linus locks and they don't say that there for multipoint locks, so I assume they are for the latch or single point lock styles. If so I can not recommend them for multipoint locks. But yea should be good for latch or single point locks. I like the idea of the lock detecting the status of the door, ie open, closed, locked and unlocked. Also, the ability to lock remotely. This is why I think ist only for latch or single point locks. Kind regards and wish you all the best. David
@@BrenTeckITSupport Hey thanks for the response! so does the Conexis not let you know in the app if the door is locked or not? even with the Z Wave addon?
@@JoePaterson1992 Hi Joe, The Conexis lets you know if the door is locked or unlocked but not open or closed. So if you try you can get a locker status when the door is open. But you have to deliberately try and do it. Open the door then lift the handle to lock it. If the do is just not quite closed then the lock will warn you it could not lock by making a locking noise longer then normal and will say unlocked. Kind regards David
That's not as smooth operating as I'd have hoped, someone leaving the house still has to manually lock the door behind them instead of the handle simply not catching until engaged as I expected it would work. Not great for a front door, especially in a HMO.
Hi Hashterix Yes it does require the person leaving the house to lift the handle to lock it. The same for most secure doors. I say secure as the push to close latch are so insecure you can open them with a credit card down the gap as seen in spy films. I do agree it would be nice to have an auto lock feature so after x minutes it could be set to auto lock and a hold open mode if you want it to stay unlocked till you lock it. I would love this feature myself. You can see if the door is locked or unlocked via the SmatThings app. Using Home Assistant you can start doing amazing things like take a photo every time the door is unlocked and locked. You could record who leaves it unlocked and have a friendly chat with them. Have Home Assistant alert you if the door has been unlocked for x amount of time. I will not go into HA here as this is a massive topic which I will do a video on later. I am just stating to get into HA and finding some of it amazing but parts frustrating so its not for everyone yet... I mean yet they are updating it all the time and it should become the standard for home automation. Kind regard and keep well David
@@BrenTeckITSupport they ought to release a split-spindle version, plenty of homes use this type of mechanism. As long as the frame of the door overlaps the door itself there would be no risk of a credit card being able to open the lock, it would operate the same as a nightlatch. Split-spindle support and a keypad would make this near enough perfect, their nightlatch version already has these capabilities but your luck is just a matter of whether you have a PVC or a wooden door.
@@Hashterix Hi Hashterix, A night latch is not classed as a secure lock. It only holds the door closed in one point using a spring catch. Which can easily be overcome by one good shoulder barge or a kick, two screws are holding it in or if you're lucky about 1cm of wood in one place which will split. Whereas a multi-point lock holds the entire door to the frame. The stretcher of the door and frame are holding the door locked and closed (as long as it's locked). You will need a ram to force this type open. This being the main problem someone has to lock it! I would love it to have the auto-lock function. So much so if it came out I would upgrade. You are right it all depends on what door and frame you have in place at the time. No lock will guarantee security, it's frightening how insecure all locks are. If you what to lose your faith in locks have a look at ua-cam.com/users/lockpickinglawyer all security does is to keep honest people honest and delay or deter the criminal. The best security for a home is to have a big dog. Kind regards and keep well David
@@Hashterix Yes like the Skybell ua-cam.com/video/3oHq1vkejHU/v-deo.html and the Netatmo Smart Outdoor Security Camera, Wi-Fi, Integrated Floodlight, Movement Detection, Night Vision, Without Fees, NOC01-UK amzn.to/3icsLad Video is in the process of being edited.
Those who live outside britain do not buy. it will not fit any other mortise except those install in Britain. distance 92mm mortise is impossible to find outside britain or the EU
Hi Michel, Where are you from and what is your handle to key distance? You could try the Loqed Lock amzn.to/443xRfs Supported doors thicknesses: up to 110mm for a symmetric door, or up to 55mm measured from the cylinder screw. The most common center-to-center distances: PC 55, 72, 92 and 110 mm. support.loqed.com/en/articles/6202154-which-door-lock-types-are-supported Hope this helps all the best Dave
Great Video, better than reading the manual, thank you
Hi,
Thank you for you comment, I do relay appreciate it and glad you found it helpful.
Kind regards
David
I have just installed this lock and it seems well made, like every product, reviews are mixed.
With a bit of thought Yale could really improve this lock especially on the software side. I wouldn't say it's a total smart lock, unless you have the z module, would be nice if that was included along with the hub. But at the moment I am happy with it.
Hi Anthony,
I get your point. It would be nice for it to come complete for first-time buyers but this would put up the price and if you already have the hub, you are then wasting money. So I think it would be nice for a lock on its own with the option of a starter kit would be best. Ie a cheap z wave hub + z wave model. Or at least make it easier and clear where to get them. Yale does have the SR-Hub & Module 2 Kit but I can not get a link for it and I have not tried it so would not want to recommend it at the moment.
I can only recommend the Samsung SmartThings Starter Kit amzn.to/2Kaxv2T with the Z-Wave Module 2 amzn.to/2WQisNr as I have tried it and know it works.
Thanks for your comments wish you all the best and keep well.
David
Very detail , I want to know door lock hole is same current not need drill new hole ! .? Thanks
Hi Elton
As long as your current lock is a multipoint euro lock then no drilling is needed.
See this part of the video, setting the fixing locations ua-cam.com/video/8_OnJTmXasE/v-deo.html and ua-cam.com/video/8_OnJTmXasE/v-deo.html so no need to drill new holes.
I hope this helps.
Kind regards and keep well
David
@@BrenTeckITSupport ok thanks
Hi Paul
I don't know where your comment went :(
"How wide is the handle? I can't find measurements anywhere and want to know if it will fully cover my old handle or if it's thinner it will expose old paint"
It's a good question so I will post it here.
Outside Width = 36mm Hight 276mm
Inside Width =36mm Hight = 386mm
I only quickly measured mine so might be out a bit so use this as a guide.
You can always paint the door before you fit it, which may be best if you are thinking of repainting it in the near future.
Hope you get to see this.
Take care and keep well
David.
excellent video, thats what i was looking for. hopefully will be buying one soon and will make a comprehensive video. Thanks
Hi Momin,
Thanks for you comment on my video about the Conexis L1 Smart Lock and that it was what you were looking for and encouraged you to get one. I see you also do your own UA-cam videos :) I have subscribed to your channel and will be keeping an eye out for your take of lock.
Kind regards and keep well
David
@@BrenTeckITSupport Great, i look forward for that. Youve explained properly which makes your channel gold.
When the custome decides to change the main opening codes on the unit, can the key cards and tags be updated with the new codes? or do they need to be replaced with new ones?
Cheers!
Hi Firebrand, I am not following what you are asking as there are no codes with this lock only authorised keys either as accounts on a phone or NFC tags.
If you reset the lock you loose all soft keys and will run out and need to buy new ones which I do not agree with. NFC tags are reusable.
I will be releasing a new video about a different lock so subscribe so you can see it when it is relaced. As I think this is what you are looking for.
All the best
Dave
I bought the Yale access bridge and it just will not pair. I must have tried 20 times. All i get is the message "You do not own any locks that support bridge. Please install your compatible smart lock first". This is the problem, I have installed the wifi module into the Conexis L1 and it is working on the app via bluetooth ok. I can unlock and lock the door fine with the app. It's the bridge that is the problem. Can you help or offer any advice. Thx
Hi Alex, great to hear from you. Have you pressed the button inside three times to start the module? Try watching ua-cam.com/video/eJEPmeE8BC0/v-deo.html as this may help. I am using SmartThings and zwave but should be the same process. Your phone is likely communicating with the lock via internal Bluetooth instead of WiFi at the moment and not using the module at all.
I hope this helps please let us know how you get on. All the best Dave
@@BrenTeckITSupport I tried the 3 press activation but nothing.
@@AlsKitchen Hi Alex, The video you sent me looks like you are scanning the wrong QR code.
First make sure your hub is less then 3 meters from your door. Power up the hub and set it up. Then try pressing the button in the lock three times in quick succession. If you need to scan any QR codes it will be on the lock modual and or the hub itself or in the documentation that came with it. Not a photo on a tablet even if this is a photo of your device the image may corrupt the QR code enough to change the data in it. When scanning QR codes make sure you only have one code in the scan area and keep the item you are scanning on a flat service not your other hand as this will give two much image shake.
I hope this helps, let us know how you get on.
Dave
Do you have to manually lift the door handle to lock or can it lock the door fully automatically?
Hi Leigh, Yes you have to lift to lock! It’s a replacement of your current lock so works the same way. If you press and turn the internal knob, use the app or key fob to unlock the door with out pushing the handle down. It will automaticity lock without being lifted again! This is because when you start the unlock process before you push down on the handle it only is engaging or disengaging the locking mechanism not moving the multi point locks around the door. Only the internal handle mechanism.
I would love it to automaticity fully lock the door remotely but I am going to guess this might require a more powerful motor, bigger batteries and how would the lock know if the door is fully closed? But would be an excellent feature.
All the best Dave
Great video and very helpful. Now that you have it over a year, can you tell me if it was worth the purchase? Thanks
Hi Pyle
Well that is an open ended question.
For us I would say yes, as I like having the peace of mind on checking if the door is locked whilst out. Also I now seldom bring any keys or wallets when I am out as I just use my phone for letting me back in when I get home and for contactless payment.
My wife likes being able to unlock the door from upstairs to let someone in as she is disabled and can take time getting downstairs so with the SkyBell she has the confidence to open the door remotely. She also loves being able to check that the door is locked while in bed.
We both love being able to unlock the front door from the worm dry inside of the car in winter and then just go straight in, no fussing at the door.
So for us, yes we love it. But I can see some people would be happy with a simple key, no battery, no internet or WiFi no problem. As for security all locks are just deterrent to stop the opportunist from walking in, so far there is not much publicly on how to hack the Yale lock so brute force is most likely which will probable mean they with use the window instead of the door being a multi point lock.
Glad you enjoyed our video, wish you all the best and keep well.
David
Hello I have this smart lock. And the sound has changed. Does that mean there is something wrong. Do I need to reset the handle if the batteries are failing. Many thanks
Hi Chantel, If it is playing few beeps after unlocking or locking the door then it is warning you the batteries are low. Just replace the batteries all settings are saved in the lock so you will not need to reset anything. Even if the batteries completely die and you are outside with the door locked you just need a 9V batterie and press and hold it to the contacts at the bottom of the outside lock and you will be able to get back in as normal.
Hope you clicked like and subscribe :)
All the best Dave
@@BrenTeckITSupport Thankyou so much for your reply. I've changed the batteries, and everything is fine now
@@chantelbriody1418 Hi Chantel, Glad we could help :) all the best Dave
So I’ve just purchased this door lock, however, the app is now no longer in use and it directs you to the Yale home app. My problem is I have no qr code to can and when I enter the serial number it doesn’t allow it. So therefore I can not access the app functionality
Hi User-yg6cs1cn8h, Yale are closing the old app and doing a new one which can be found www.yalehome.com/global/en/trusted-innovation/yale-apps/download-yale-home
You may well need to get a new module in your lock and attach your DoorSense™ Magnet as well which you can get from yalehome.co.uk/yale-access-module-upgrade/
I hope this helps.
I have now moved to using the Loqed smart touch lock ua-cam.com/video/8aVovYLc6lc/v-deo.html
All the best
Dave
Great video, well done. Can you remove tags / cards from the lock if they are lost though?
Hi Dan
Yes,
Open the app and click the key icon top right,
Click My Locks,
Tap for Settings,
Click Cards/Tags
Select the one you have lost
Click Remove.
Done
I wish there was a way to suspend the key so you can reactivate it once found instead of having to add it back.
Wish you all the best and keep well
David
What happens if you upgrade to a new phone? Does the app transfer across? Surely you don't have to do a hard reset on the lock?
Hi, A good question. The app only allows you to be logged into one phone at a time with that soft key. You install the app on a new phone and login, it will then ask if you want to move your key to the new device, once you confirm the move is done. The key will still show up on the old device but will not work just in case the phone was lost or stolen. Hope this helps.
I appreciate this video is 11 months ago but how are you finding the lock. Can you lock it remotely on your smartthings app? Would be interesting to see smartthings functionality with the lock. Great vid, thanks.
Hi Hammy,
I am finding the lock to be relay good, especially in winter. I sit in the car and use the app to unlock the front door. That way I spend less time in the rain. Pore me ... I also like having the ability to check to see if I have not left the door unlocked when out. It's nice to have the reassurance your home is secure so you can enjoy the day.
Your not the first to want to lock the door remotely and I am sure most of us want this option. However it is not possible with this lock as it's lift to lock. The motor just disengages or engages the handle after the handle has been lifted.
I have done a video of the Yale Conexis L1 Lock working with z wave and SmartThings here ua-cam.com/video/eJEPmeE8BC0/v-deo.html
Glad you liked my video,
Kind regards and keep well
David
@@BrenTeckITSupport Hi David,
Thank you for taking the time to reply. I am considering getting one myself, thanks to helpful videos like yours. I hadn't even thought of that extra assurance knowing if the door is locked! I'll check out your other video, thanks again.
This or the ultion ? not really anything else on the market for multipoint locking doors, also will any of these locks work with stable doors ?
Hi Busyswizzler,
I don't know about the ultion lock so I can not say how that one will be, only the Yale Conexis L1 Smart Lock.
As for any lock on a stable door design, I really can't say. I know UPVC stable doors exist as I have seen them but not taken one apart yet. So all I will say if it's using the standard multi-point and lift to lock then I can't see why they won't work. If you want to be sure asked the door manufacture if they are compatible.
Hope you had a lovely Christmas and wish you all the best for 2021
David
Great video, can you disable the beeps?
Hi Leo,
I do not think you can, and I would advise against it if you could, as an audible warning of the lock working or not as the case may be is better to have than not. The beeps are not that loud compared to the door being closed anyway so they will not disturb anyone sleeping. It may sound louder in my video due to the amplified mic.
I hope this helps, all the best
David
@@BrenTeckITSupport You can actually disable the beeps, or have them quieter, it's done in the advanced lock settings in the lock, that's also where auto relock time, shutdown time, and wrong tag lockout time limit are set too, at least in my app anyway. I'm very curious how you did the firmware update you mention though, if you can remember; my understanding is that you borrow a currently unobtainium 'update module' from Yale, is that how you did it, or is there a a hidden way via the app or a download from somewhere? Mines a very old firmware that I'd like to update if possible.
@@Tekwyzard Hi Ken, Yes you are very right about looking in the advanced lock settings thank you for your input on this topic.
I can not remember exactly how I did the firmware update, I know I used my phone and had over-the-phone support from Yale. Possible something to do with Samsung smart things I really can not remember but I know it was not obvious and you would not stumble on to it. Looking at some online forum posts it looks like you have to send the lock back for a firmware update now Mar 2021. I can find anything official from Yale about this. I will contact Yale and see if I can find out for you.
can you register more than 1 fob when you do the initial setup to avoid paying for it separately?
Hi Sahim,
You can register extra fobs at any time. There is no charge for setting up fobs other than the purchase of them. Soft keys are per account only, unfortunately.
I hope this helps, kind regards and keep well
David
Nice lock but I'm afraid it's going to wake people up when I leave early in the morning, is it very loud ?can you turn the bleep off ? How are you getting on with it since May cheers
Hi Daz,
Hope you had a good Christmas.
Are you meaning the quiet beep the lock makes, or the app on your phones?
If you mean the lock itself No. But it's not that loud in real life, the video makes it sound louder as I have an amplified mono-directional mic aimed at it.
It's no louder then closing the door behind you as you leave.
If you mean the app then yes.
There are two easy ways of doing this.
1. Turn off the Play Unlock Sound in the app. Click the gear icon, Notifications, Play Unlock Sound.
That's what I have done along with Unlock Vibrate.
2. More complicated but good to have and get to know.
Download MacroDroid from the play store play.google.com/store/apps/details?id=com.arlosoft.macrodroid&hl=en_GB
Add macro, Date/Time, Day/ Time Trigger, (set when you want to turn off ALL notifications sounds, Actions, Volume, Volume Change, Sent any volume you want on any or all sliders, Tick and give it a name and press OK
Then do it again and set the volume high.
Now at night the volume on the phone goes down and back up in the morning.
Play with this app it's Free for five macros at a time I believe. You can start making more automation with it. I find it very useful and easier to use then Tasker.
If you want I can make a video on how to do this if it helps.
Wish you all the best.
Dave
The motor nosie and the bleep on the unit sounds so loud ?,yes and I hope you had a good xmas chhers
Sorry didn't read it all, lol thanks for the reply
Hi literally did everything like you did but mine after installing and all kind of bleeps when put handle down and up the last bleep when it shows its lock doesn’t come up neither red light. So i cant move to next step and register card. Any suggestions?
Hi Abc. It could be a trapped / pinched lead as this causes all sorts of weird problems. I suggest taking the lock off completely and starting again making sure to use the cable run space, also make sure the bar is the right length ua-cam.com/video/8_OnJTmXasE/v-deo.html
ua-cam.com/video/8_OnJTmXasE/v-deo.html
I hope this helps please let us know how you get on.
Remember to Like, Share and Subscribe.
All the best Dave
@@BrenTeckITSupport so i take the whole lock down start again and it was the same so i send it back to Yale and they called me apologise for inconvenience and send me new one which i paid more for installation…. The old/original unit was ok but bluetooth wasn’t working so it was manufacturer issue.
@@AbcAbc-ch4mq Hi Abc, if ever in dought it's best to get a professional installer in for any job. Shame about the Bluetooth not working from out of the box but these things do happen. This could have been the issue don't know why you would be told the old one was ok but Bluetooth not working this means there is a fault and so the lock is not working as expected LoL. Well, at least you got it all sorted now.
I love having this lock the number of times I would have locked myself out as I often forget to pick up the key fob when I leave but never forget my phone so I can always get back in. :)
All the best and thanks for your comments
Dave
Great video, have you lubricated those hinges yet?
Hi David,
Thanks for that, you know I don't think I noticed the squeak until you pointed it out. Humm another jobe for me to do if I have not done it already. Thanks a lot lol :(
Take care and all the best.
David
Hi David. Great review! Could you please answer this question for me. I often leave my front door open as I have a stainless steel mesh security screen that I keep locked, allowing a breeze to flow through the house.
If I leave the door open/ajar for a long period of time, will the Conexis be OK, or will it beep at me incessantly?
Thank you, - Mike.
Hi Mike
It will beep ones waring you the door is open but I think it then stops. I certainly have not noticed it more than that.
I hope this helps, kind regard and keep well
David
thanks for the full walk though.. do you know if it is possible to turn down the volume of the notifications on the door.. (not wanting to wake the whole house if leaving to work early).
Hi,
Are you meaning the quiet beep the lock makes or the app on your phones?
If you mean the lock itself No. But it's not that loud in real life the video makes it sound louder as I have an amplified mono-directional mic aimed at it.
If you mean the app then yes.
There are two easy ways of doing this.
1. Turn off the Play Unlock Sound in the app. Click the gear icon, Notifications, Play Unlock Sound.
That's what I have done along with Unlock Vibrate.
2. More complicated but good to have and get to know.
Download MacroDroid from the play store play.google.com/store/apps/details?id=com.arlosoft.macrodroid&hl=en_GB
Add macro, Date/Time, Day/ Time Trigger, (set when you want to turn off ALL notifications sounds, Actions, Volume, Volume Change, Sent any volume you want on any or all sliders, Tick and give it a name and press OK
Then do it again and set the volume high.
Now at night the volume on the phone goes down and back up in the morning.
Play with this app it's Free for five macros at a time I believe. You can start making more automation with it. I find it very useful and easier to use then Tasker.
If you want I can make a video on how to do this if it helps.
Wish you all the best.
@@BrenTeckITSupport Thanks for the quick answer! I meant the beep from the door electronics itself when registering an unlock. So it's not so noisy... Thanks.
@@Oceansteve Hi,
I would say it's nice and quiet. However, that is subjective. Plus people are good at filtering out repetitive noise that is unimportant so if it does wake anyone up they should get used to it jut like the kettle clicking off when you make your tee/coffee.
I hope this helps.
David
Do smart locks like this activate the multi points the same as if you had turned the handle "up" manually before locking it?
Hi Alan, sadly no you must manually lift the handle to engage the multipoint locks. The motor only allows the handle to be active or deactive. You must also push the handle down to unlock the door after telling the lock to unlock otherwise within about 30 seconds it will disengage the handle again. So if someone is at the door and you want to let them in remotely you must have the zwave module installed first. You can use the Samsung smart things app to activate the handle. The person can then push down on the handle to retract the multipoint locks and open the door. To lock the door, the person must first close the door and lift the handle fully. The motor will then disengaged the handle so the door can not be opened again. The handle must be fully pushed up otherwise it will attempt to disengage the handle but will fail and the door can still be opened, if using zwave and Samsung smart things the status of the lock should also show the door unlocked if this happens.
I hope this helps. I can do a quick video about this when my new tripod arrives. If you like.
Dave
BrenTeck IT Support hi Dave, thanks so much for your detailed reply, this is exactly the kind of detail I was looking for in my investigations into whether to consider smart locks (I'm a complete gadget geek and smart locks are about the only thing left 'to do' in my house). I always wondered about the push up functionality, I suspected that smart locks, being only battery operated, couldn't really do the pushing up, I figured they must only disengage the handle or something like that.
Your explanation was really helpful, I may still go for them but at least now I'm much better informed.
Cheers,
Alan
@@BrenTeckITSupport My door currently doesn't have multi lock mechanism. So when I close it behind me then the handle can still be pushed down to open. Am I right in understanding that with this, the unlock feature enables the handle to be turned downwards? So even if I don't have a multi lock door I can use this to effectively lock the door behind me because the handle can then not be pushed down again unless I unlock it?
@@kalelkar Hi Saager,
The lock will not work for you what you want is the Yale YD-01-CON-NOMOD-CH Keyless Connected Ready Smart Door Lock amzn.to/2TKKtpi
Sorry for the delay the app did not show me your message. I am still getting used to running the channel, I have a lot of catching up to do apparently.
Hope this helps
David
If I have more than 1 Conexis L1 lock in the house, can I reuse the same tags or do I have to buy new ones for each lock?
Hi George, A good question.
The simple answer is Yes you can us one key tag/card on multiple locks.
I called their support to find this out as it's not clear online.
The full answer is;
Each lock must have one and only one master phone account.
Each lock can have up to 50 key tags/cards to open them.
Each phone account can have any number of locks to work with.
Each key tag/card can work with any number of locks.
Kind regards
David
@@BrenTeckITSupport Thanks for getting back to me.
I seem to have the same thickness PVC door as in your video 45mm. The distance from the inside to the centre of the lock is 23mm. According to the book it says I need the short tailbar but in your video you have used the long one. Can you please clarify which is correct? Thanks
@@georgevarsamis4554 Hi George,
I believe that I had to use the short one in the end and Pack B. The Tailbar I am NOT using is 54mm The problem I had is I did not use the cable run the first time and so the lock was not sitting correctly.
Sorry for the delay in my reply, the YouTub app only shows me new comment threads, not new comments. So I am missing out on comments even though I check every morning. :(
Hope this helps, if you need any more help please fill free to ask and good luck fitting it, hope you have fun.
David
@@BrenTeckITSupport Thanks David. That has been really useful.
That little hand on the box looks like your hand lol
Hi Steve,
You found out my secret, I am Deadpool. lol
Take care and keep well.
David
Hi David, so well over a year now since you've had the Yale Conexis L1 Smart Lock, would you recommend it ?
Hi Michael
Yes, Yes I would recommend the Conexis L1 Smart Lock. It has never let me down, I do keep a 9V battery in the glove box just in case but as long as I replace the battery when it gives me the warning beep it will be good to go every day.
I am finding the lock to be relay good, especially in winter. I sit in the car and use the app to unlock the front door. That way I spend less time in the rain. Pore me ... I also like having the ability to check to see if I have not left the door unlocked when out. It's nice to have the reassurance your home is secure so you can enjoy the day.
To unlock the door using the app you need the z wave module which I have done a video of the Yale Conexis L1 Lock working with z wave and SmartThings here ua-cam.com/video/eJEPmeE8BC0/v-deo.html
Hope you had a lovely Christmas and wish you all the best for 2021
David
@@BrenTeckITSupport Brilliant David Thank you, and a Happy New Year to you and your family too.
Very helpful video well done. There is one question: I have same lock as your original lock, is it possible to use another lock rather Yale conexis L1? For example Ultraloq UL3?
Hi, Sorry for not getting back to you earlier. The simple answer is no. The Conexis L1 is for a "multipoint lock" with a lift handle to engage all locking points and the motor retracts the locking system to disengages the handle. I hope this helps. So if you are wanting to upgrade then you will need the Conexis L1 amzn.to/2JGkxsJ.
Hello BrenTeck , do you know some other lock for this type oh multilock system?
Hi Zelijko, at the moment I only know of the Yale Conexis lock that works with lift to lock system. Regards David
ERA used to do an electronic lock that had a keypad on, it was rather chunky and I don't think it connected to WiFi or Bluetooth, that was a few years ago they may have a new product now.
Here is another option but more expensive than the Yale.
www.aviasmart.com/
My only whinge is that, unlike others, there is no way to configure it to unlock when your smartphone's wifi comes within range. So you either have to get your phone out to use the app (awkward if you have your hands full or if it's raining etc) or get the fob/RFID card out and hold it on the sensor.
I have not found a suitable alternative but will jump ship as soon as possible if I do. (Edit: see my reply to my own post below where I have very successfully used a SmartThings hub and Z-Wave module to get around this limitation. MW).
Hi Martin,
Sorry, you are having problems with yours. Make sure your batteries are fully charged / new alkaline. I get away with rechargeables but they are not recomended.
Also, make sure no wires are trapped/pinched as this can cause a communication problem.
You can have it unlocked via geofencing or wifi connectivity using events in Samsung SmartThings, Google Home, Alexa or using HomeAssistant but this is a lot more work to get working and I don't recommend doing it as we found that our door unlocked when phones restarted or power on when at home. The door will relock after a minute or two if the leaver was not pushed down so not supper critical but still a security flore. The best practice is to use the NFC fob.
If it's raining we unlock the door using the SmatThins app so we can walk strat in from the car.
I hope this helps and thanks for your comments.
David
@@BrenTeckITSupport Hi David, I'm £200 in so I might as well go the extra mile. Would I need the 'sync module' and the 'Yale Connect Wi-Fi Bridge' *and* one of Samsung SmartThings, Google Home, Alexa or HomeAssistant? If so which one (of the last lot) would you say is best for my geofencing needs (I probably won't use the 'talk to it' thing much but you never know...).
@@BrenTeckITSupport BTW, am I right in understanding that there is an alternative synch module that isn't wi-fi-based but one which uses z-wave comms instead?
@@martinwinlow Hi Martin,
OK This is going to be fun to explain as things have changed since I got ours and did the video.
You will need a sync module of some type;
1. I used to recommend the Z-wave 2 module with smart things. BUT this has stopped working with home assistant due to updates and SmatThings is now rebranded. It still works great using the SmartThings APP.
2. Aeotec Smart Home Hub - UK version amzn.to/3mZ1qwl which is SmarThings rebrand + Yale SD-M1100, Smart Door Lock Z-Wave Module 2 amzn.to/31M7eBm.
3. Or The Yale Wi-Fi Bridge + Access Module amzn.to/3BVRBDH
The new Yale Connect Wi-Fi Bridge + Yale Access Module may be a better starting point amzn.to/3BVRBDH but I have not tried it so can not say how good it is or if it offers anything over the Aeotec Smart Home Hub - UK version amzn.to/3mZ1qwl which is SmarThings rebrand.
Smart assistance such as Google Home, Alexa or HomeAssistant are not needed to use the module and app to unlock the door remotely.
Geo-fencing the lock was not a great experience for me. With the updates I don't know how well it will work now as when I did it I used Stringify that no longer exists :( I did not move it over to HomeAssistane as I found Geo fencing the lock to be unreliable from "my" phone.
To do Geo fencing you will need a 3/4th party such as Alexa routines, SmatThings or IFTTT to track your location then respond to the change. Home Assistant may work with the new Aeotec Smart Home Hub amzn.to/3mZ1qwl or even with the old SmartThings if starting from scratch. The SamartThings updates just broke the security. There is a Yale smart living integration for Home Assistant but I have not tried it.
I am now using a ZigBee dongle with Home Assistant directly to overcome the problems with SmartThings but this does not support Z-Wave and I do not know what the new Yale Access Module works on as I can not see in their documentation. It may be ZigBee, Z-wave, Bluetooth, the new Matter standard or WiFi who knows.
I am sure this is not as helpful as you were hoping for but just my experience and with the new Matter standard coming out soon all could change again, have fun.
David
@@martinwinlow Hi Martin
The new Yale Access Module amzn.to/3kjOYWi may be ZigBee, Z-wave, Bluetooth, the new Matter standard or WiFi who knows.
The old one was Z-Wave amzn.to/3CYZr0Q works with Aeotec Smart Home Hub (SmartThings) amzn.to/3klhIxS
Regards
David
I see this lock works with ZigBee, is there a ZigBee module for this lock, or is it just Z wave
Hi Anthony,
I don't know if the Conexis L1 can use ZigBee, where did you see this?
This is why I recommend the Yale Smart Door Lock Z-Wave Module 2amzn.to/2WQisNr as I know it works.
Yale does there own Z-wave hub. But I recommend the Samsung SmartThings Starter Kit - White amzn.to/2Kaxv2T as it gave us more devices to test and have around the house.
Keep well and all the best
David
@@BrenTeckITSupport I am not sure where I read it, but one site I came across said it was Z wave and ZigBee compatible.
I have decided to use the module 2 and Samsung hub version 2.
Hi Anthony,
Good plan, best to be sure you get a comparable system.
Take care and keep well.
David
Good installation video :-)
Did you manage to add the "skill" to Alexa? Keeps telling me my email and / or password is incorrect even though it exactly matches
Hi AberdeeAl,
In a word yes. I don't think I recorded it and ever use it. I prefer Google Home Assistant and SmartThings.
First of, make sure your details are ExAcT as it could be case sensitive and check you have got Num Lock off if using a keyboard without a number pad.
Is your Amazon account associated with the right country I remember this causing me a problem for something in the past?
To check/change region:
1. Logged in to your Amazon account in a desktop browser.
2. Go to Accounts & Lists > Your Content and Devices >
3a. Preferences and click the downwards arrow to the right of Country/Region Settings to view your current country.
3b. You may need to click "Learn more about updating your default Kindle Store to Amazon.co.uk"
4a. Hit Change and enter the new address you'd like to associate with your account
4b Click Transfer your Kindle account to Amazon.co.uk
Doing this will change a whole host of Amazon settings and preferences so take care before changing it.
Kind regards and keep well
David
Do you know if it is possible to control access to certain days/times of each key fob or only with the mobile keys?
Hi, I gave them a phone call for you and found this! Yes, you can when setting up a new soft/shared key. (Not the fob or card) Also can not be added to an existing key it must be done at the time of creation.
To Schedule time Keys:
- When sending a sub user a shared key, there is an option o send them a scheduled or permanent key
- Permanent key will give access to the user all of the time
- Scheduled key will give the sub user access only during specific times the master user sets
To set up a scheduled key
- Type in the email you would like to send a key
- Select ‘Scheduled Key’
- Select the start/end time you would like to enable the key fore
- Underneath it will ask you to select days which you would like the key to be valid from and what date. Please see picture www.brenteck.com/images/YaleScheduling.png
what is a soft key for the yale conexis L1 smart lock
Hi Shuaib
A soft key is one in the phone app. You have to buy one for each account / user. They are not transferable between users or reusable which is a shame. You can put them on a new phone but only one device per key (user).
So if you want to give someone regular access to your property I suggest using a key fob or card and they can hand it back when needed. If they don't you can deleted the key to stop it form working till you get it back. When setting up the card / fob you can add a time it can be used, but only during setup.
I hope this helps.
Kind regards and keep well
David
Would be great if someone could do a troubleshooting video. Had this lock for around two years and for reasons unknown when I close the door the confirmation chimes now ring multiple times instead of the once like it used to do and the only way to stop it is to push the internal button to the right after locking. I've tried resetting it to no avail. Just annoying
Hi Tom,
I think this might be warning you the batteries are running low and to replace them now before they get to low to reliably operate the look. It does start waring you well in advance so you may not sport the correlation between the double chime and batteries dying.
I hope this helps.
Kind regards and keep well,
David
@@BrenTeckITSupport Thanks for your reply. It is definitely not the low battery chimes and I put fresh ones in just in case. It is the door close chimes. When closing the door they used to chime once but now they chime multiple times for about 2 minutes unless you turn the internal circular button to the right to stop it.
Wondered if anyone else had a similar problem.
Humm, ok could you not be lifting the handle enough, or the door just slightly ajar stopping it from looking property?
If it's not this than give Yale support a call
This help page looks very useful so try this there is a sample of sounds but all are short.
help.yale.co.uk/advice/product-support/smart-door-locks/conexisl1/
Telephone: 01902 364 606
Email: info@yale.co.uk
@@BrenTeckITSupport . I have been all over that site and it really doesn't help. Yale are known for having very poor support and not replying to emails anyway the problem is annoying but I can live with it. Thanks all the same.
@@tomaharbowx Hi Tom, I have been extremely busy this month so sorry for the late reply.
If it's not the handle being lifted fully or the door not being fully closed fully. It could be a traped lead or another fitting problem such as not enough room for components to move or the wrong bar insert. It could be worth opening the lock again and refitting it to make sure it's all correct.
Good luck and let us know how you get on.
Kind regards and keep well
David
My lock sounds like it is having trouble locking and then when it does lock, it doesn’t actually stay locked. Any advice ? Or faulty product.
Many thanks
Hi Shezan
I found ours does this from time to time, Not the locks fault but mine!
If I just let the door close on it's own and don't push it fully shut and or do not lift the handle fully the lock fails to engage. This is to be expected as I have not fully closed the door!
You are probably experiencing the same thing. When it sounds like it is looking for a longer time than it should, give the door a shove and lift the handle fully. See if that helps.
Kind regards and keep well
David.
Thanks good video
Hi Populargood
I am glad you liked it.
All the best and keep well.
David
Biggy for me is that you can not lock it via phone/smart home integration (only unlock).
Hi Kevin,
Yes, I know what you mean but if you already have a lift to lock setup then you should be used to it. It's just a simple lift to lock and all done no key needed. But I do wish there was a motor to do remote locking for though of us who forget to lift to lock or if we let someone in to drop off a package, walk the dog etc and wanted to make sure the door was locked after.
I guess it would take more battery power and a bigger motor to do it.
Thanks for watching and commenting, keep well.
David
can you fit it up to the back door as well ?
Hi Peter, the Conexis L1 is only for multipoint locks. So If your back door is multipoint UPVc door like my front door then yes. However, if you have a French patio door I don't think so as looking at mint it does not look to have enough room to fit. Tilt and slide doors would definitely not work with it. It might work with sliding doors depending on your mechanism.
Best bet is to contact yale directly www.yalelock.com/en/yale/com/menu/contact/
I hope this might help.
I just found a compatibility guide.
www.yale.co.uk/Yale/Yale_co_uk/Smart%20Locks/Conexis/Conexis%20L1%20Template%202017-2018.pdf
and
help.yale.co.uk/is-conexisl1-compatible-with-my-door/
David
How do you get in if the batteries fail?
Hi Malcolm,
You use a 9V battery on the outside of the lock. There are two metal contacts at the bottom. I keep one in the car and one in the garage.
It works well as I have had to use it twice as I wanted to see how long after the battery low warning chime it would work for, it varied between a few days to a week.
Hope this helps.
David
is this still something you recommend? there's the new yale linus lock too, you looked at that one?
Hi Joe,
Yes, I still recommend the Conexis L1 for multipoint locks. I have just had a quick look at the new Linus locks and they don't say that there for multipoint locks, so I assume they are for the latch or single point lock styles. If so I can not recommend them for multipoint locks. But yea should be good for latch or single point locks. I like the idea of the lock detecting the status of the door, ie open, closed, locked and unlocked. Also, the ability to lock remotely. This is why I think ist only for latch or single point locks.
Kind regards and wish you all the best.
David
@@BrenTeckITSupport Hey thanks for the response! so does the Conexis not let you know in the app if the door is locked or not? even with the Z Wave addon?
@@JoePaterson1992 Hi Joe,
The Conexis lets you know if the door is locked or unlocked but not open or closed. So if you try you can get a locker status when the door is open. But you have to deliberately try and do it. Open the door then lift the handle to lock it. If the do is just not quite closed then the lock will warn you it could not lock by making a locking noise longer then normal and will say unlocked.
Kind regards
David
@@BrenTeckITSupport Legend, cheers for this! the app only has 1.5 stars, only thing that puts me off tbh!
@@BrenTeckITSupport Also sorry, but you can have 5 soft keys (im guessing thats on mobile) but you can have unlimited hard keys??
That's not as smooth operating as I'd have hoped, someone leaving the house still has to manually lock the door behind them instead of the handle simply not catching until engaged as I expected it would work. Not great for a front door, especially in a HMO.
Hi Hashterix
Yes it does require the person leaving the house to lift the handle to lock it. The same for most secure doors. I say secure as the push to close latch are so insecure you can open them with a credit card down the gap as seen in spy films.
I do agree it would be nice to have an auto lock feature so after x minutes it could be set to auto lock and a hold open mode if you want it to stay unlocked till you lock it. I would love this feature myself.
You can see if the door is locked or unlocked via the SmatThings app.
Using Home Assistant you can start doing amazing things like take a photo every time the door is unlocked and locked. You could record who leaves it unlocked and have a friendly chat with them.
Have Home Assistant alert you if the door has been unlocked for x amount of time.
I will not go into HA here as this is a massive topic which I will do a video on later.
I am just stating to get into HA and finding some of it amazing but parts frustrating so its not for everyone yet... I mean yet they are updating it all the time and it should become the standard for home automation.
Kind regard and keep well
David
@@BrenTeckITSupport they ought to release a split-spindle version, plenty of homes use this type of mechanism. As long as the frame of the door overlaps the door itself there would be no risk of a credit card being able to open the lock, it would operate the same as a nightlatch. Split-spindle support and a keypad would make this near enough perfect, their nightlatch version already has these capabilities but your luck is just a matter of whether you have a PVC or a wooden door.
@@Hashterix Hi Hashterix,
A night latch is not classed as a secure lock. It only holds the door closed in one point using a spring catch. Which can easily be overcome by one good shoulder barge or a kick, two screws are holding it in or if you're lucky about 1cm of wood in one place which will split. Whereas a multi-point lock holds the entire door to the frame. The stretcher of the door and frame are holding the door locked and closed (as long as it's locked). You will need a ram to force this type open. This being the main problem someone has to lock it! I would love it to have the auto-lock function. So much so if it came out I would upgrade.
You are right it all depends on what door and frame you have in place at the time.
No lock will guarantee security, it's frightening how insecure all locks are. If you what to lose your faith in locks have a look at ua-cam.com/users/lockpickinglawyer all security does is to keep honest people honest and delay or deter the criminal.
The best security for a home is to have a big dog.
Kind regards and keep well
David
@@BrenTeckITSupport Or indeed realistic visible security cameras would make a good deterrent!
@@Hashterix Yes like the Skybell ua-cam.com/video/3oHq1vkejHU/v-deo.html and the Netatmo Smart Outdoor Security Camera, Wi-Fi, Integrated Floodlight, Movement Detection, Night Vision, Without Fees, NOC01-UK amzn.to/3icsLad Video is in the process of being edited.
Those who live outside britain do not buy. it will not fit any other mortise except those install in Britain. distance 92mm mortise is impossible to find outside britain or the EU
Hi Michel, Where are you from and what is your handle to key distance?
You could try the Loqed Lock amzn.to/443xRfs
Supported doors thicknesses: up to 110mm for a symmetric door, or up to 55mm measured from the cylinder screw.
The most common center-to-center distances: PC 55, 72, 92 and 110 mm.
support.loqed.com/en/articles/6202154-which-door-lock-types-are-supported
Hope this helps all the best Dave