Hi...this question may sound strange, but - can the opposite be done? Use the vision+ camera with an osd module and analog 5.8 ghz transmitter, while changing the remote to an 2.4 ghz version?
hello I have a pt 2 vision plus I accident it and the gimbal and the camera stop working, well now I want to put a gopro 4 but without gimbal but working the fpv, it can be done
Hello, i recently crashed my P2 Vision, everything is fine but the camera wont work, is the drone still flyable? Are there any higher fly away risks? I am thinking of strapping a gopro onto it seperately and completely removing the gimbal
hello i'm looking for help. I have ph2 vision plus with zenmuse h3 3d. everything works fine if i fly without the dji vison app the tilt camera works but if i run the dji vision app and connect to the drone everything works but can't tilt camera. that is, the camera does not respond to the potentiometer in the controller. is there any solution? thank you
@@FlymyPhantom Okey i just ordered the arduino board gonna try and fix it tomorrow. Its been collecting dust for 3 years. Thanks for the awesome guides!
Where can you download the vision app. I havnt been able to find it. I use litchi for p2 and it works for flying but I have no video feed. Great video.
@@j4r3d18 to answer your questions, if its the Phantom 2 vision plus and you have fitted the setup shown in the video then you cant use a 3rd party transmitter as they will interfere with the controller, facing down is something i get asked about a lot, its a fault with the gimbal from what ive been told
@@FlymyPhantom @FlymyMavic ohh so what i can only do is use the transmitter that is supposed to be in with the vision plus? Is the gimbal fixable or do i have to return it? I also forgot to tell you that the gopro is only charging whenever i turn on the drone
There is no freaking way we speak the same language what the f@#$ did you just say??? I cant see what pins and plugs u refer too, try holding the camera above the thing you're working on so the purpose of this video will not be lost as no one can see what your doing?
Hi...this question may sound strange, but - can the opposite be done?
Use the vision+ camera with an osd module and analog 5.8 ghz transmitter, while changing the remote to an 2.4 ghz version?
Thanks again Justin for Jackson mod and tool package you sent me merry Xmas from Andy. Mavic 👍👍👍
The DJI P2 SERIES LIVES FOREVER!!!
hello I have a pt 2 vision plus I accident it and the gimbal and the camera stop working, well now I want to put a gopro 4 but without gimbal but working the fpv, it can be done
Hello, i recently crashed my P2 Vision, everything is fine but the camera wont work, is the drone still flyable? Are there any higher fly away risks? I am thinking of strapping a gopro onto it seperately and completely removing the gimbal
hello i'm looking for help. I have ph2 vision plus with zenmuse h3 3d. everything works fine if i fly without the dji vison app the tilt camera works but if i run the dji vision app and connect to the drone everything works but can't tilt camera. that is, the camera does not respond to the potentiometer in the controller. is there any solution? thank you
Hi
Have you set the controller to upgrade mode in the assistant program ?
@@FlymyPhantom hi thanks for answer . no its in verion one
Will this fix the black FPV screen on the app ? I have an old GP4 silver and this seems like a good way to fix the problem :)
No as this method uses the same WiFi module as the original camera, so the problem will remain, you need to fix or get the WiFi module fixed
@@FlymyPhantom Okey i just ordered the arduino board gonna try and fix it tomorrow. Its been collecting dust for 3 years. Thanks for the awesome guides!
@@rakamora2266 any issues let me know
Hi if i fit a wifi module to standard vision Not plus model..would this still work? Ive a faulty fc200 and this would be a great solution.
yes it would work fine
Did you try this as I’ve the same No Live Feed issue on my P2V FC200 camera
I can’t see any reason why this wouldn’t work, but it’s an expensive fix as the cam and module will cost around £200
FlymyMavic cheers for the advice might just look at an aftermarket gimbal and FPV camera
Hello, I have a question, is it profitable to buy Dji Phantom 2 in 2020/2021
Profitable? No
Fun yes
These older quads are great for training on and getting used to how quads work,
Where can you download the vision app. I havnt been able to find it. I use litchi for p2 and it works for flying but I have no video feed. Great video.
Android
Droneslinger.com/software
iOS should be on the App Store
mine only shows black screen in the app ? the gimbal and everything works except it doesnt show image
It’s likely you have a failed module, its a common fault with the wifi modules
@@FlymyPhantom so should i replace it with the original wifi module or a 3rd party wireless transmitter?
@@FlymyPhantom one more thing is the gimbal is facing down a little bit is there anyway to fix that?
@@j4r3d18 to answer your questions, if its the Phantom 2 vision plus and you have fitted the setup shown in the video then you cant use a 3rd party transmitter as they will interfere with the controller, facing down is something i get asked about a lot, its a fault with the gimbal from what ive been told
@@FlymyPhantom @FlymyMavic ohh so what i can only do is use the transmitter that is supposed to be in with the vision plus?
Is the gimbal fixable or do i have to return it? I also forgot to tell you that the gopro is only charging whenever i turn on the drone
Hi can you give me a diagram for the connection
Email me flymymavic@outlook.com
There is no freaking way we speak the same language what the f@#$ did you just say??? I cant see what pins and plugs u refer too, try holding the camera above the thing you're working on so the purpose of this video will not be lost as no one can see what your doing?
2.2k views and you are the first to complain, tell you what you do a video on it and send me the link