Electric Rebar Cutter Restoration
Вставка
- Опубліковано 6 вер 2024
- I found this device from a recycling shop in Japan for $50. The motor runs normally. But the piston isn't moved.
I hope you find this video useful and enjoy it!
Furthermore, I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did in this video !!!
Thank you very much for choosing to watch my video!
Have a nice day
Gear Show
Great job! A little tip, 15:07 pressing on the inside ring can damage the bearing. In this case press on the outside of the bearing :D
If you must press on the inner race of the bearing, put the old bearing on top and then use it to press the new one.
Согласен!
Bin einverstanden!
The real mvp of restorations. Not like the vast majority of scammers who abound on UA-cam, who falsify the states of things and then make restorations only with brush and paint.
7:47 this device equals its Weight in gold 💯
Great job, thank you brother. You are so talented
I never seen such a tool like that before. Nice refurbishing for sure
very nice. interesting to see the rebar "cut" process. it shows where the strength is. great video.
Two mistakes in this one. Don't press bearings from the inner race, that's how you ruin them, you might even have the bad luck to press them apart and don't use abrasives on the commutators, rather a clean file. Abrasives embed themselves in the soft copper and ruin it.
@ 7:32 I like that bearing pull.... Very clean & nice... Well done Sir....
hello have a nice evening 🥰🥰
Great restoration and amazing work tool!
Perfect timing to upload the video and wonderful restoration
It is interesting to see a tool I know nothing about get restored. Thanks😀
Good video
22:05 nice
Nice job
Thank you so much for this. Watching this, your harmonious work, is comparable to a long session of meditation. It sooths the ragged soul.
Gear show perfect restrasyon
Brilliant from UK
Is there anything you have taken apart that you couldn't get back together?
Hello very good
Nice job 👍
Love from India gear bro😊💗
Big fan Pakistan
MAGISTRAL!!!! Y yo llevando la bordeadora de pasto al service para que la revisen!!!!!
Великолепная работа!
I think this is your first electrefied pressure method tool that you're fixing. I don't think i have seen myself any of these even in real life. Has to be very specialized tool...
Amazing device and great restoration! Thanks for sharing, that's been very informative!
Excellent work 👍👍👍 . Thanks for sharing
Wonderful work as always brother, I suggest you to make a restoration about Crown brand. Where I'm from it's very popular. Greetings from the Mediterranean.
Nice job! "Like" from me! Thanks for this video.
ขอบคุณสำหรับวิทยาทานนะครับ
And just like that it's like new 👍 great job. Really enjoyed watching.
Güzel çalışma eline sağlık kardeşim
You're doing great work.
I waited a lot for the video.. It felt so good to be able to see your video today..
늘 볼때마다 리스토어는 흥미롭군요.
Комментарий в поддержку канала и ролика, а также труда мастера.
Nice work , thanks a lot for this great videos ,i like your meticulous job
Do you take old tools to restore? I have a pair of drills that the battery don't work anymore but I don't want to throw them out, I would like to know if I could send them to you to make a good use of them.
Should be great to see Sandblasting!!!!!!
I love how gear show does more with electronics than Mr. electricity
Молодец 👍👍👍
Another fantastic restoration. Thank you!
I assume that the seal you repaired will function with the repair. I have no idea of the workings so I don't know myself. Hope it does! Looks pretty dang good!
Hi, I'd suggest du use a glass plate below your sanding paper so it's reasonable flat
Great work! Thank you very much for your wonderful videos!
But what systems are used in this machine to convert rotating force into shear cutting force?
Hi. It would be great if you could do this with a charger. I'm looking forward to. good work.
wow awesome machine. great job
So powerful 😍
Поржал с того, что он шнур помыл кинув его в воду) пускай гниёт себе)
good job bro
What were you spraying on the armature at the end of the video?
This is what mechanical surgery looks like. So satisfying
В 2012-ом году работал на гильотине подобного плана, но маятникого хода - до 25 мм арматуру резали.
Fantástico 👏👏👏💯🇧🇷
Great job.
Ottimo lavoro fratello, complimenti.
Dobra robota 👍. Pozdrowienia z Polski 🇵🇱
Чёт еле еле работает. А так молодец 👍
21:07 все развалилось на этом клее :)
Can u do a AC to DC with this?...
Great work bro
Muy buen trabajo
21:06 you brake the plate in superglue position , the glue isn't resist the impact force , but i hope it work nicely a long time
otherwise , great job bro...
Any idea of the manufacturer?
Very good
👍
عمل رائع 👍
Modified Battery Adapter and DC12V
Hello evrybody
WOW! Great job!
I never seen such a tool like that before. Nice refurbishing for sure. And it would be great to have such a tool if you were building a foundation with rebar. Thumbs Up!
If you made that one battery powered it would be the bicycle thief's greatest tool.
👍👍
Maravilha Gear Show! Gratidão
@10:16 I would have used JB weld. But other than that good 👍 Job 🙂
Imagine walking around with this thing all over site, carrying long extension cables
You actually use the fins on the anvil to put it in a vise and work at a work station, like where you're making the bends, wiring the quadrants and all that jazz.
Top 10 things I shouldn't put my wee wee in
Satisfying sound in 3…2…1…0:43
🇹🇭🇹🇭สุดยอดติดตามตลอด
beatiful
Những chiếc roang đã bị nứt, hỏng nên thay cái mới, không nên dan keo khi vào máy làm việc nó lại nứt tiếp, vì không chịu được lực nữa OK
💪👍😉
I thought you will convert it to cordless
15:08 noooo😭😭😱 u will damage the bearing😭
10:50 притирку на наждачной бумаге лучше проводить подложив Стекло,столешница всегда кривая завалишь края.
ممتاز مرة أخرى متى الفيديو التالى
The Japanese learn to drive with the English and use electricity with the American. 😂😂
what is the name of the process at 13:30
mükemmel olmuş elinize sağlık
why hasn't there been a video for a long time
Why bother cleaning the bearings?
Вы хотя бы узнали как правильно запрессовываются подшипники,если до этого момента были не в курсе.Смотреть больно на такое рукож....во.
👍👏🖤
👍👍👍😊
Make it cordless
한국사람?
more tahn better a n angle grinder
upgrade to battery
26 seconds