Це відео не доступне.
Перепрошуємо.
Enforcer™ PUC™ Pumper Tanker - Wasilla, AK
Вставка
- Опубліковано 19 сер 2024
- Check out Central Mat-Su Fire Department’s new Enforcer™ Pumper Tanker. The body style was chosen, with additional compartment space in the crew cab, due to their rural service area with longer response times. To save space, a rear snap tank was added. Front bumper mounted turrets allow pump-and-roll capabilities. With the darkness in Wasilla, Alaska each emergency light has a scene light underneath providing additional lighting.
CHASSIS
Chassis: 70” Enforcer cab with 24” raised roof
Seating capacity: 6
Overall height: 11’ 4”
Overall length: 37’
GVW Rating: 76,000 lb
Front axle: TAK-4® Independent Front Suspension, 24,000 lb
Rear axle: Meritor RT50-160, 52,000 lb
Engine: Detroit Diesel DD13, 525 hp, 1850 lb-ft
Safety: Side Roll and Frontal Impact Protection
Electrical: Command Zone™ Advanced Electronics System
BODY
Material: Aluminum
Shelving: Adjustable up to 500 lb
Doors: Rollup
Pump: Pierce PUC™, 1500 gpm
Tank: 2125-gallon
Foam System: Husky™ 12 Foam System and Hercules™ CAFS
Foam Cell: 50-gallon
Job Number: 34962
Dealership: Hughes Fire Equipment
What a beautiful rig.
SWEET, the Pumper/ Tender combo probably helps with your ISO rating! Good luck with the upcoming winter months!!
Sweet truck
I love the video
Nice
Lighted 'Big Dipper' Constellation?
I'm moving to wasilla lol
What is the gpm on that pump
1500 gpm with 2125 gal. tank
What’s a snap tank?
Portable dump tank. Similar to the classic Fol-Da-Tank, except whereas the Fol-Da-Tank is a one-piece unit--the frame is permanently sewn into the fabric--the Snap Tank is more like a camping tent in that the fabric "tank" and metal frame are separate parts that the crew assembles on scene. The Fol-Da-Tank has the advantage of quicker deployment (a couple firefighters pull it off the side of the rig and pull on opposite corners until it pops into a square or rectangle) but requires more space for storage--two sides of the tank collapse, while the perpendicular sides are rigid, so a 3000g/11,350l model measures 13ft x 13ft x 29in/4m x 4m x 74cm (both units of measure rough and rounded) when open and 13ft x 7in x 29in/4m x 18cm x 74cm when packed--whether simply slapped on the side of a tender or an internal compartment sized to fit. A disassembled, 3000g/11,350l SnapTank, meanwhile, measures 79 x 16 x 14in/200 x 41 x 35cm (I've never personally worked with a SnapTank, so I don't have deployed dimensions, and pulled the disassembled numbers from NationalFirefighter.com's catalog), so you're sacrificing deployment time for added space for other gear on the rig. Looks like that's what works for Central Mat-Su, and they designed that specific compartment to fit their SOP.
Thats amazing information about Pierce Manufacturing: ua-cam.com/video/1CSqlY1rKc0/v-deo.html