Removing Backseats for MORE BASS | Backseat Delete | 2011 Scion xB | DaSlapBox
Вставка
- Опубліковано 14 жов 2024
- In this video, we remove the backseats to make more space for bass in DaSlapBox, which is my 2011 Scion xB car audio build,
It's not a racecar, it's a bass car.
The port of my subwoofer box for my Fi BL18 was being choked by the rear hatch/trunk door and the only way to solve the problem was to remove the backseats and move the box away from the back of the car.
Removing the backseats is very easy, the bottom just pulls off and the back is held in by a few bolts. After removing the backseats I took measurements for the frame I needed to build and the new wooden trunk floor I was going to make.
Thanks for watching!
•••SUPPORT THE CHANNEL•••
Some links below are affiliate links, meaning I earn commissions on qualifying purchases at no extra cost to you.
(Amazon, Auxito, Big Jeff Audio)
~~~Coupon Codes~~~
(Use my coupon code at checkout. You get a discount, I get a commission. It's a win win!)
Auxito LED Headlight Bulbs: DBN15 (15% off) www.auxito.com...
Big Jeff Audio: DBN5 (5% off) bigjeffaudio.c...
~~~Referral Links~~~
Amazon Storefront: www.amazon.com...
Auxito LED Headlight Bulbs: www.auxito.com...
Big Jeff Audio: bigjeffaudio.c...
~~~Contact~~~
Instagram: / dabadnewz
Tiktok: / dabadnewz
Email: DaBadNewz@DaBadNewz.com
~~~Popular Videos~~~
• Build and Install 1/0 ...
• Install Pioneer Head U...
• Subwoofer Box Build fo...
• Installing a High Outp...
• Installing 80 mil Soun...
• Sound Deadening Car Ro...
• Sound Deadening Scion ...
• How to Spray Paint Pla...
~~~DaSlapBox~~~
2011 Scion xB
Audio:
Head Unit: Pioneer AVH-2600BT
Subwoofer: Fi BL18 • Subwoofer Box Build fo...
Subwoofer Amp: Sundown SCV-1500d
Subwoofer Speaker Wiring: 8ga OFC SHCA
Subwoofer Terminal Lugs: 8ga Copper Lugs, 1/2" I.D. amzn.to/3YJ2wO2
Door Speakers: Pioneer TS-A1684R A-Series 6 1/2"
Power:
Alternator: Mechman 240A
Power/Ground Wiring: 1/0 OFC SHCA
Power/Ground Terminal Lugs: Riocan 1/0 AWG
Ring Terminals amzn.to/3YJ2wO2 (1/4, M6) amzn.to/3YGFcRa (5/16, M8)
Acoustic Treatment:
Sound Deadening: Noico 80 mil (Doors+Panels, Roof, Floor, Trunk, Center Console, Pillars) amzn.to/47HpadN
Closed Cell Foam: Noico 315 mil (Floor) amzn.to/47DomXs
Sound Deadening Roller: Lumiteco Bearings Equipped Sound Deadening Roller amzn.to/3P4bylv
Lights:
RGB Strips: ELLights (Footwells, 2 rows under sub box, under amp, around amp rack) amzn.to/47JN8VJ
Fog Lights: Auxito Q16 H11 LED Bulb, amzn.to/3OMGh5q
Low Beams: Auxito Y19 H11 LED Bulb, amzn.to/3KOuzpG
High Beams: Auxito 9005/HB3 LED Bulb, amzn.to/3KR1ud4
Brake Lights: Phinlion LED amzn.to/3YZ6jap
Reverse Lights: Phinlion LED w/ Projector amzn.to/44nGOAq
Turn Signals: Phinlion LED amzn.to/47yp3kG
Dome Light: iBrightstar 31mm LED amzn.to/3P5wPeE
Map, License Plate, DRL: iBrightstar Wedge LED Bulbs amzn.to/3qFV6i4
Junkyard Finds:
Daytime Running Lights from 2013+ • Installing Fog Lights ...
Foglights + Switch + Grille • Installing Fog Lights ...
JDM Toyota Rumion Tail Lights
I see this man has his priorities in the right order. Screw passengers. Bass is what matters :D Love the channel bro,! Keep it up!
Oh you know it!! Bass > Passengers any day! And thanks for showing love man, it really means a lot! (And saw that email, we’ll be talkin!)
Man I like the progress videos. Some of the things don’t get finished all at once and I think most of us with builds understand that! That platform is gonna make a big difference I’d say letting that port breathe. Nice work!
Thanks for the feedback! And yea if I waited until each phase was done it’d take me forever to put stuff out (not that it doesn’t now haha). And yea it already makes me a lot more secure about security if the amp and it’s mounting. Thanks for watching man, have a great one!
LMFAO! "This must be what it feels like for a parents child to come home from Afghanistan" Bro that actually made me LOL
That’s really how it felt man!!
@@DaBadNewz I laughed because I can relate! HAHA.
That intro line🔥
I appreciate that!!
I like the construction updates, its interesting and gives me motivation for my own project. Maybe put the other content on a secondary channel MoreBadNewz or something.
Thanks, I definitely hope my videos can inspire some progress on some builds! And yea I actually already have a channel that strictly AV stuff, I was just considering merging then a bit. But I like the MoreBadNewz idea, I’m gonna have to use that for something for sure!!
Awesome thanks 🔥😎😎💯🎧 ,I have 2010 scion xb,7.0.
Thanks for checking it out!! Thats dope you got the RS, I’m basically trying to DIY one!
Man these videos are well done. I have a 2009 Toyota Corolla Rumion (I'm in Japan) and virtually nobody does bass in Japan, let alone in a Rumion/xB, so these videos are a HUGE help for my build. Not sure if I want to go 4 12's or 2 15's.
Thanks! And oh really? Didn't know car audio wasn't very popular out there (but now that I think of it, I can't remember seeing a car audio video from Japan, but I have seen a few subs in more race-style cars).
That's really cool though man, I'm glad you can find some use out of them, and if you have any questions, don't hesitate! Pretty sure for the next version of my build I want to do 15s (thinking 3, but I'll have to see how the math works out).
Super jealous you got easy access to all the Rumion parts! I've been thinking about planning a trip to Japan just for the parts shopping.
Thanks for checking out the channel man!
hey how to remove rear seats?! that’s crazy
Let's see if I remember correct. You have to remove the back part first, it folds down and then you have access to the 6 or so bolts that hold it in place (4 on the back, and 2 that hold it to the sides). With the back out, the part you sit on just pops out if you pull on it. Under that there is a metal frame that it is mounted to (you can see at 0:17), that you can remove with a few bolts. I just left it in there though and use it as support for my frame the box sits on.
Hope that helps!
Thanks for watching!
@@DaBadNewz i released all bolts, bottom part of seat just should be pulled up?
@user-ey4sj6xu1z yea it’s just locked in there with 2 clips, you kinda just pull up on the seat and it will release itself (you can see me do it in the very beginning of the video, but it happens quick)
@@DaBadNewz thanks bro, appreciate it, have good day
no problem man, good luck with your project! If there's any other questions you have, I'd be happy to help if I know the answer
My bass sucks but I have good system but I have a car where my back seats t fold down or anything I feel like if I could it would be wayyy louder
For cars like that you gotta get creative (also depends on how deep you wanna go). I would seal it up and port through the shelf as part of my box design, or at least leave room for the trunk to breathe into the rest of the car.
I literally bought this car because the shape was good for bass!
Good luck figuring that out though, and thanks for checking out the video
best case scenario imo would be if you could post a car audio video and your audio video work video at the same time. 2 posts so its kinda like a win win for both. If you want to post anything you gotta bro regardless but since you brought it up we wouldn't mind a car audio video along side it. If takes longer im cool with that if you are. lol
Maaaaan just the fact that you would watch 2 videos if I dropped em means a lot to me! I appreciate the feedback! And yea I’m not trying to switch to the AV stuff, just kinda bring another part of what I do to this channel you know? Definitely still gonna keep it car audio regardless!
Thanks for watching and taking the time to leave feedback!
@@DaBadNewz Bro your videos are lit and informative, I'm sure a lot of people be looking forward to your post on your channel. I wouldn't mind 2 or even more keep them coming bro the more consistent you are the further your channel will go. If you care for that stuff.
I’m definitely trying to step up the consistency, for sure for sure! Thanks for the words of encouragement man, I guess imma have to drop some of these non-car videos and just see what happens
@@DaBadNewz Yessirrr you got this man !
Is that wood level a family air loom lol jk nice work!,
It’s funny you say that, it kinda is!! Not even sure whose it was, but definitely either my grandpa’s or my dad’s. Thanks for checking it out! Have a good one man
Are you using 5/8 “or 3/4”
3/4 for the frame parts and amp rack, 1/2 for the actual trunk floor
Legit shit!
Thanks man! Trying to take it to the next level now that it’s back making noise
@@DaBadNewz that was a miiin..
I’m sayin man! I had to make a big come back