2007 Honda CR-V front doors speaker removal and install after market

Поділитися
Вставка

КОМЕНТАРІ • 29

  • @mkendall86
    @mkendall86 Рік тому +4

    What size are those speakers

  • @richardpbenaidrene6458
    @richardpbenaidrene6458 3 роки тому +5

    couldve purchased 4 brackets on amazon for $16 plug & play.did my sons was so clean

  • @marioclarke420
    @marioclarke420 2 роки тому +3

    What’s the size of the speakers?

    • @nestorautorepair
      @nestorautorepair  2 роки тому +1

      I believe 6 1/2

    • @eddiediaz9267
      @eddiediaz9267 2 роки тому +1

      @@nestorautorepair it is 6 1/2 most Honda’s use 6 1/2 or 6x9 sometimes on the back. But I’ve found 6 1/2 are better for most Honda’s.

    • @nestorautorepair
      @nestorautorepair  2 роки тому +1

      Thanks for sharing boss

  • @jayjayigna9602
    @jayjayigna9602 3 роки тому +1

    Did you had to drill holes to the door?

    • @nestorautorepair
      @nestorautorepair  2 роки тому

      Yes the screw will make the holes

    • @djijspeakerguy4628
      @djijspeakerguy4628 2 роки тому +1

      He did, but you don’t have to. They make brackets that look identical to the factory speakers, which new speakers can be mounted on. This removes the need for drilling, and is better because it also has the effect of moving the speaker closer to the interior door panel, which likely improves sound by channeling more sound out the grill rather than behind the interior panel. It also means the magnet has less chance of stopping the window from rolling all the way down if you install a more powerful speaker with a large magnet. Not to mention, it eliminates the gap between the speaker and the metal, seen at the top of the speaker at 4:34, which could effect bass performance.
      So basically, don’t do what this guy did, don’t drill your door! Buying the bracket is worth it.

    • @kolmevarista
      @kolmevarista 2 роки тому

      drill holes in good spirits, completely useless refinement of such brackets if you are not going to audio competitions...

  • @djijspeakerguy4628
    @djijspeakerguy4628 4 роки тому +3

    You do know, they make brackets so you don’t have to drill holes in your door.

    • @nestorautorepair
      @nestorautorepair  4 роки тому +2

      Ok

    • @kolmevarista
      @kolmevarista 2 роки тому +2

      what do those holes harm?

    • @djijspeakerguy4628
      @djijspeakerguy4628 2 роки тому +1

      A new hole won’t directly cause any problems, but it is more convenient to mount the new speakers with the same holes. Also, you may get a better seal with the bracket because it isn’t metal on metal, which improves the bass. Also, I had a family member who needed a stereo upgrade and wouldn’t allow me to drill new holes in their door, so I used the brackets. Lastly, the brackets make the speakers closer to the interior door panel, which both improves sound, and allows speakers with larger magnets to be installed without the magnet blocking the window from opening fully.

    • @djijspeakerguy4628
      @djijspeakerguy4628 2 роки тому +1

      Also, at 4:34, did you notice, at the top of the speaker, there is a gap between the speaker and the metal in behind it? That may or may not effect the bass performance. I certainly wouldn’t do that with any speaker, even if it were concealed behind a panel that rarely ever got removed.

    • @nestorautorepair
      @nestorautorepair  2 роки тому

      Ok

  • @davidcastillo1340
    @davidcastillo1340 3 роки тому +5

    You can get a BIC lighter for $1 at any 7-11

  • @dckoolaidlisa
    @dckoolaidlisa 4 роки тому +1

    Guys SMASH that 👍 BUTTON!!!