DIY Kayak Truck Rack & Bed Extender (Easy To Load Your Kayak In)
Вставка
- Опубліковано 7 чер 2020
- How do you transport kayaks in your truck?
Do you throw them in the back and hope they don’t fly out on the way home?
Or do you have a rack that you like?
In this video, I’m going to show you how I made a DIY kayak rack using a truck bed extender.
It helps keep my kayak safe and scratch-free, and it makes it really easy to load my kayak in and out of.
I’ll also show you how I strap my kayak down and what not to do when doing this.
Every time I go fishing I always drive 45 minutes to 2 hours on the highway, so this setup has been put to the test a lot and it's passed with flying colors (at least, I haven't lost my kayak yet!).
How do you transport your kayak?
Have any questions about this rack?
Let me know in the comments below!
P.S. To get our best fishing spots and tips, plus discounts to our online tackle store, click here to join us in the Insider Club: bit.ly/2XGwi8n - Розваги
To get our best fishing spots and tips, plus discounts to our online tackle store, click here to join us in the Insider Club: bit.ly/2XGwi8n
Just bought my first Yak. Been watching hundreds of hours of vids, trying to see who, what, when, where, why, and how yakers are transporting Yaks. I bought a bed extender, was looking for mods. This is the winner! Man this is awesome! I was thinking of 2x4s, of a pipe, etc, this setup is perfect. Thx man. I also have Yakima roof rack system as a backup, in case of a failure. Older disabled Vet here, so low loading will definitely be more user friendly. Not to mention my fishing buddy who is telling I don't need to do this extra protection stuff, will see it, then want one. Lol! Awesome, most useful vid I've watched on this subject yet. Thank you.
Dude! This is one of the best Kayak mods ever. Great video ! Tight Lines
Great video. I have a bed extender and have been looking to make bunks for the kayaks I transport. I love this idea. Gonna make one similar for two. Thanks!
Awesome instructions Tony! That’ll finally be solving my problem on how to get my kayak safely from SA to Port A!
Tony .. great idea.. you might want to use 2 straps.. cheap insurance.. I’ve had those straps fail ..
I had something similar but this is next level!! Love it!!
Fantastic design! I just purchased a Hobie and have been looking for the best way to transport it. Many Thanks...
Nice design! Thanks for posting.
I really like this set up. Ultimately, I’m looking for a trailer set up, but until I can get that figured out (including where to store it) this is at the very least a great interim solution.
Thanks for checking it out!
Pretty cool setup
You should always use two tie downs min and one for every 10’ of your cargo. If you made the bunks the same length as your kayak you could use it to hang it up for the non used storage time as well . I like the design.
Nice change and great work
Great video.
Thank you I will be making one I like it👍
You're welcome!
Sweet
Not really DIY if you're starting with a $250 bed extender product, but I like the idea of this.
Awesome
Thanks!
And Hobie recommends you simply lay it flat, without tunnel supports.
But you still have to spend several more minutes ON THE RAMP installing your batteries, gear, cooler, pedal drive, graph, and anything else. And with a PA14, its a beast to pick the nose OR stern up off the extender empty.
nice.
Thanks for checking it out!
Could you add the breakdown of parts used? In addition what holds PVC to bed ?
Nice! Are the bunks necessary if you have a full size bed? Would the bed extender be enough?
Hi Tony will that bed extender fit any tow bar insert?
Thanks for the great video! Can you please tell me what diameter pool noodles used? And, did you just slit the noodles on one side length-wise, or actually cut them fully in half lengthwise? I've got 2 @ 22" wide sea kayaks to transport in a full sized f150 bed, with bed extender,, and will be trying to construct an integrated 2 bunk unit, using your pvc design. Will be trying to construct in a way that the pvc unit is snug fitting, stabilized between the wheel wells (48"). Thanks for any info and/or suggestions!
Thanks for your question! Make sure to ask this over in the Community
where the coaches spend their time. There are some tips that can be found here as well: www.saltstrong.com//search/?wp_searchable_posts%5Bquery%5D=pool+noodle
Sweet mod
Thanks!
So... How do you take this off and put it back on? Looks awesome, otherwise!
Why did you build the bunks vs. just using the bed of the truck? I have a t-bone and it lines right up to my bed height to be a nice flat surface.
Same here. I’ve got a long bed Tacoma and just have a rubber bed liner as well as the T- bone for the Outback to rest flat on. Good idea but I just didn’t see the need unless I’m missing something. Thanks for the vid though.
@@bennettles9230 short bed Tacoma here and the t-bone makes it rock solid.
I don't think you can avoid scratches on the bottom of your kayak if you are fishing, so I don't have a need for protection in the truck bed. (Tacoma long bed, with built-in liner.)
How is the pvc system attached to the truck bed? Or does it just rest on top freely ?
Judging by the movement that was shown, it’s just resting freely. It gets tensioned when you strap the kayak down.
Hobie Outback owner's manual clearly states that PVC bunks are not to be used... It will void the warranty.
Thanks for the info
@@Saltstrong 👍
Three way coupler? You mean a PVC Tee?
Yes, it would be considered the same. Thank you for watching!
I think the the end t bar is to long
You dont say how its fastned to the truck bed
It’s not. Even though he doesn’t say it, you can tell by the movement. It doesn’t need to be attached to the bed since it get tensioned by the weight of the kayak and the cam strap.
it is obviois that it's attached to the tbar and just resting on the truck bed
All I really use is 1 strap..... Simplicity says this is efficient... Common sense says you're buying time for that disaster moment.
Ratchet strap = too tight or not tight enough. I cringe every time I see someone use them.