Vasily Custom Builds you're off to a good start. I'm trying to tell you what to do just a suggestion. Something you could try if you don't already have one an air powered angle grinder with a 3in disc with a brown pad on it. the cheapest I found them is at Harbor Freight or possibly online maybe. the brown green and the purple disc pad is good. but the brown cuts the best and fastest. it would really smooth your welds down better than a grinder or flap disc o grinder and acurate. They're so accurate I have machined tops of carburetors down with them and you can put a level on them they're so clean and accurate. Orinda small four-stroke gasoline engines I am too I have them on a lot of machines and equipment and vehicles. If you're interesting and starting up with propane or running propane message me I've always been gasoline. But it always leaves black carbon. wear, tear and carburetor rebuilding down the road. What's cool about propane the carburetor can die and you can add propane and still keep getting it I even took a carburetor off a little 9 horsepower engine while I was rebuilding the carburetor and ran it on propane. It ran at an idle and wide open. I'm not too good at texting I do voice command I talk and it prints it out for me. I use an average BBQ tank in a about a 6ft lead spray it into my gasoline engines if it get flooded or not want to start and I start up with propane. Also you could run your little engines on gasoline shut them off with a little plastic valve and run propane on them. And when an average 20 lb BBQ tank on my 2200 wattduel fuel propane and gasoline generator will run 19 hours at half an idle. And I can put the generator with a bag down under the generator in my backseat of my truck. Because it doesn't have any gasoline in it just 12 oz of oil in the crankcase. I've never used gasoline in this little generator so far. Message me back if you're interested in converting over to propane or actually excuse me running dual fuel propane and gasoline. You're pretty mechanically inclined it's really easy to convert to propane you can buy those expensive propane conversion kits. but you seem like a guy that uses a lot of different engines and builds all kinds of things so this conversion is a lot easier in one will fit on all of them it's Universal. Also gasoline can be hard to start propane it's not hard to start as long as you got engine spark plug fire and propane down the intake it will run. And propane Never Comes Out Of Tune and generally they say a propane motor last two to three times as long as a gasoline motor will. And the motors are super clean in a propane engine no matter how rich or lean you run them. also the spark plug oil and inside of the engine and muffler are super clean.
Vasily Custom Builds I don't know how to do a UA-cam video. Or print and paste stuff in the comments section. Or I would send you the simple stuff how to hook up propane I'm sure you could do it you do more than that. Or if you want to call me over the phone I can call you or you could call me. I could tell you how to do it it's a lot easier. Once you go propane you won't go back to gasoline on the Little Engines. And starting big gasoline engines it works great too. You just wouldn't want to start a 2-stroke with it or if you did you might be wearing on the motor sex propane doesn't have oil in it. But it probably wouldn't hurt it just to start it with propane.
Fine job, I have been spraying furniture for 40 years, learned to keep it simple, buy a cheap $20 cupgun, a gal of lacquer, + laq .thinner and some 180 s paper, add 80% laq. 20% thinner, after you spray empty cup, always and add a lil thinner, and trigger gun . Do not disassemble gun. You will find out how wonderful it can be, light prep. By hand,and spray, lacquer is your money maker, trust me, you can make any piece you spray look so good, and it drys so fast, trust me, that's what I'm good at, can't weld at all, good work young man, I appreciate you. Ok
Enjoy seeing a younger guy cutting and welding etc. expressing himself through a creation. I would just add as a tool and die guy that has had to dig steel bits out of my hands and eyes a couple times, wear safety glasses at the least always when cutting, cleaning etc. only get 2 eyes.
Might as well ignore what I said 😂 you learn fast as hell. It's awesome to see some people with common sense and self awareness. It's awesome to literally see the learning progression in the video, and see someone else have as much ambition towards this profession/hobby. We're a dying breed so keep it going strong 💪💪 Side note: also nice to see your heart through the video, very gentle with the little bird and caring. You're an awesome guy, don't change man 👌 you've earned my sub
I did this with the same exact scooter but I used one of them Chinese 79cc CAG motors that they put in the pocket rockets. I got one with the blue flywheel cover and it looked really slick all put together. I took it to the liquor store for some smokes and on the way back, I was able to pass people in cars that were going at least 30mph. I cut the silencer off of the cheap run of the mill expansion chamber pipe that they make for that engine and I think some of the debris made it back down into the exhaust port. I think I'll bring it back to life after watching this. Also, yours looks like its WAY snappier. Im jealous.
Idea for a new video: Make a mini camper looking like a scaled-down-truck from a scooter engine (like in this video), a differential fit for it's size and weight, to have two powered wheels in the front, and a front cabin where the driver to be protected from rain and snow, and make it a 4-wheeler with wheelbarrow wheels (which are bigger than that scooter's wheels) or even small scooter wheels (if they're cheaper, for the size). It would be a lot more expensive, and would need a bigger engine, but you would have a mini camper in which you could sleep, or a mini-truck for carrying cargo. You might even be able to fit some cheap motorcycle suspension, to make the ride smoother. I do think a lot of the parts could be second-hand, and having access to a scrap yard would surely come in handy. And I'm sure there are people who would buy one for themselves. Just look at the pod rider, on google images and/or youtube, and imagine the long-truck version of that, just long enough for an adult to sleep in it.
Not sure how but this video got recommended to me by UA-cam. The bird you found was a Tufted Titmouse! They’re very friendly, and you’ll probably spot a lot more of them if you put a feeder out!
If you go out and get yourself a 49cc scooter exhaust and put it on your motor real it will quiet it down and you won't have your neighbors about a noise that it makes
this video takes me back to what i loved about you tube .. a well grounded guy with plenty of drive to make things happen and .. no big ego to feed.. no make up artist either - you dont fuck about lol i dont know what or when you tube broke for me but i feel like a tourist most of the time.... lost without a paddle in destinations i wouldn't be seen dead in!
You my friend are one very talented young guy. You perfected this thing all with improvising! Funny I can fix transmission problems on my cars but always had trouble with these dang things lol
Pretty Sweet ! Make sure you get an" 18and Over to look it over and" Sign,'As-Is' and that You accept No responsibility for future use,and or damage to equipment or user" Letter" when you Sell,or give.: That is a pretty nice scooter.Wish we could use on sidewalks here.Really great work Vman.
Pretty good welding. You should put it together with some lipos batteries instead of fuel. It will make it quieter and quicker i believe. I upgraded mines with 12” hubs, a phase runner controller with a 52v battery and it humms like a baby at 30 mph. Good work kid.
Nice intro. I'm glad you got an air filter! Your neighbors will be happy you got a muffler. Paint looks great! Do you know what type of scooter that is? I might want to build one similar. Great video! Great thumbnail too
100% !! The flux core welds will be harder to master, Stick makes prettier welds. It takes alot of practicing to be able to weld thin metal with a stick welder though.
Go to orchelns if you got one around and get you a simple 120-130amp 110-120 volt MIG and make sure you get Flux core wire. Costs about $200 total going the cheap way. I personally started on an Arc welder with 6011 rods and once I got comfortable I went to MIG and it was like spreading butter on bread it was so easy. You don't have to be a certain age to buy a welder and if you're young then ask for one for Christmas or your birthday haha. Good luck!
Good job buddy, I keep checkin you out.actually have 2 wheeler collection (12) from ezip 400 to couple brit.iron triumph n a norton wish i was yer age agin . i'm 62...stay with it✌
The connecting rod in the engine from factory are very cheep and are not ment for high rpm. If you want a connecting rod for high rpm, you can get one from go power sports or a proformance company so the rod will not break and damage the block.☺☺
Great video!! Just a couple of tips: Metric bolts aren’t stronger than sae bolts. It’s just a different unit of measure. You have to look at the grading of the bolts to determine “strength”. You need to put more tension on your chains. This is why they keep coming off/breaking/rubbing. There should only be a few millimeters of slack in the chain at the center point between the two sprockets. Yours always seem to have an inch or more which is really bad. Keep up the good work! Great channel!
You are correct that finer thread bolts have more holding power. The thread size is called the thread pitch of the bolts. Metric vs SAE (inch etc) is just how the bolt heads and threads are measured; not a reference to their strength or actual thread pitch. For stronger bolts you want to look at the grading of the bolt. Like a grade 8 bolt vs a grade 10 bolt.
Enjoyed the build I've had a lot I like building the razor drift karts as long as you know how to use your 2 hands an have a little common sense you can put a motor an anything
ok now that i seen part 2 i see the seat is back. dang you did allot of work to it.. more than i am willing to do to mine, my ryobi s430 engine i think may not be enough.. maybe do a go kart engine..
I don't know man, the hassle of buying another project car, when I already have a project car sitting in the driveway. And it's been done plenty on UA-cam. I might consider it in the future. But I do wanna turbo my red car
@@VasilyBuilds my build is crazy is need alot of stuff done with it but it will pay off this video gave me more thoughts 😀. Tomorrow is the shipment of my predator 212cc engine can't wait to do some mods like you did 😋
Thank you for the advice because this build is going be hard to do the bolts are rusted on and it's for the engine so I need to figure out how to get that off I didn't even get it off today but I probably need WD-40 and leave it over night
I just did the same thing with a Schwinn scooter and an old pocket rocket engine. Waiting for master links to give it a full test ride but from the little ride I took it has a crazy amount of torque. Full throttle going like 15-20 still pills the front end up. I'm not gonna have much of a top speed though like yours
Feeling generous? Consider giving my Patreon page a ✔️ www.patreon.com/vasilycustombuilds Any donations are much appreciated!!
Vasily Custom Builds you're off to a good start. I'm trying to tell you what to do just a suggestion. Something you could try if you don't already have one an air powered angle grinder with a 3in disc with a brown pad on it. the cheapest I found them is at Harbor Freight or possibly online maybe. the brown green and the purple disc pad is good. but the brown cuts the best and fastest. it would really smooth your welds down better than a grinder or flap disc o grinder and acurate. They're so accurate I have machined tops of carburetors down with them and you can put a level on them they're so clean and accurate. Orinda small four-stroke gasoline engines I am too I have them on a lot of machines and equipment and vehicles. If you're interesting and starting up with propane or running propane message me I've always been gasoline. But it always leaves black carbon. wear, tear and carburetor rebuilding down the road. What's cool about propane the carburetor can die and you can add propane and still keep getting it I even took a carburetor off a little 9 horsepower engine while I was rebuilding the carburetor and ran it on propane. It ran at an idle and wide open. I'm not too good at texting I do voice command I talk and it prints it out for me. I use an average BBQ tank in a about a 6ft lead spray it into my gasoline engines if it get flooded or not want to start and I start up with propane. Also you could run your little engines on gasoline shut them off with a little plastic valve and run propane on them. And when an average 20 lb BBQ tank on my 2200 wattduel fuel propane and gasoline generator will run 19 hours at half an idle. And I can put the generator with a bag down under the generator in my backseat of my truck. Because it doesn't have any gasoline in it just 12 oz of oil in the crankcase. I've never used gasoline in this little generator so far. Message me back if you're interested in converting over to propane or actually excuse me running dual fuel propane and gasoline. You're pretty mechanically inclined it's really easy to convert to propane you can buy those expensive propane conversion kits. but you seem like a guy that uses a lot of different engines and builds all kinds of things so this conversion is a lot easier in one will fit on all of them it's Universal. Also gasoline can be hard to start propane it's not hard to start as long as you got engine spark plug fire and propane down the intake it will run. And propane Never Comes Out Of Tune and generally they say a propane motor last two to three times as long as a gasoline motor will. And the motors are super clean in a propane engine no matter how rich or lean you run them. also the spark plug oil and inside of the engine and muffler are super clean.
Thank you!
@jon smith I will look into that
Vasily Custom Builds I don't know how to do a UA-cam video. Or print and paste stuff in the comments section. Or I would send you the simple stuff how to hook up propane I'm sure you could do it you do more than that. Or if you want to call me over the phone I can call you or you could call me. I could tell you how to do it it's a lot easier. Once you go propane you won't go back to gasoline on the Little Engines. And starting big gasoline engines it works great too. You just wouldn't want to start a 2-stroke with it or if you did you might be wearing on the motor sex propane doesn't have oil in it. But it probably wouldn't hurt it just to start it with propane.
Do electric scooter e.bike complete rebuild
For a young dude you have skill. If i was an company owner i would hire you right away.
I got a junk one of these in my yard. Should it remain junk or should i try to get it running? 100 thumbs up will get me to look at it
Meet in the middle at 50?
How about two
do it now i will even give you a blown up 50cc
I'd take it off ya for a few buxks
Whats the status of this now?
Fine job, I have been spraying furniture for 40 years, learned to keep it simple, buy a cheap $20 cupgun, a gal of lacquer, + laq .thinner and some 180 s paper, add 80% laq. 20% thinner, after you spray empty cup, always and add a lil thinner, and trigger gun . Do not disassemble gun. You will find out how wonderful it can be, light prep. By hand,and spray, lacquer is your money maker, trust me, you can make any piece you spray look so good, and it drys so fast, trust me, that's what I'm good at, can't weld at all, good work young man, I appreciate you. Ok
Wow, I missed this one. I love that the donor frame came from an electric scooter👏😂😂😂
Enjoy seeing a younger guy cutting and welding etc. expressing himself through a creation. I would just add as a tool and die guy that has had to dig steel bits out of my hands and eyes a couple times, wear safety glasses at the least always when cutting, cleaning etc. only get 2 eyes.
Might as well ignore what I said 😂 you learn fast as hell. It's awesome to see some people with common sense and self awareness. It's awesome to literally see the learning progression in the video, and see someone else have as much ambition towards this profession/hobby. We're a dying breed so keep it going strong 💪💪
Side note: also nice to see your heart through the video, very gentle with the little bird and caring. You're an awesome guy, don't change man 👌 you've earned my sub
Haha Thank you for your kind words! Trying to earn a living
I did this with the same exact scooter but I used one of them Chinese 79cc CAG motors that they put in the pocket rockets. I got one with the blue flywheel cover and it looked really slick all put together. I took it to the liquor store for some smokes and on the way back, I was able to pass people in cars that were going at least 30mph. I cut the silencer off of the cheap run of the mill expansion chamber pipe that they make for that engine and I think some of the debris made it back down into the exhaust port. I think I'll bring it back to life after watching this. Also, yours looks like its WAY snappier. Im jealous.
Idea for a new video: Make a mini camper looking like a scaled-down-truck from a scooter engine (like in this video), a differential fit for it's size and weight, to have two powered wheels in the front, and a front cabin where the driver to be protected from rain and snow, and make it a 4-wheeler with wheelbarrow wheels (which are bigger than that scooter's wheels) or even small scooter wheels (if they're cheaper, for the size). It would be a lot more expensive, and would need a bigger engine, but you would have a mini camper in which you could sleep, or a mini-truck for carrying cargo. You might even be able to fit some cheap motorcycle suspension, to make the ride smoother. I do think a lot of the parts could be second-hand, and having access to a scrap yard would surely come in handy. And I'm sure there are people who would buy one for themselves. Just look at the pod rider, on google images and/or youtube, and imagine the long-truck version of that, just long enough for an adult to sleep in it.
Not sure how but this video got recommended to me by UA-cam. The bird you found was a Tufted Titmouse! They’re very friendly, and you’ll probably spot a lot more of them if you put a feeder out!
I like how you kept the little cargo space that is cool!!!
Almost 5 thousand subscribers! This build is dope
Yessir thank you! Next ones should be 🔥🔥
I put this engine on a bike, but I had a torque converter also. It isn’t crazy fast, but with the torque converter it definitely gets you moving.
If you go out and get yourself a 49cc scooter exhaust and put it on your motor real it will quiet it down and you won't have your neighbors about a noise that it makes
Really professional job bro!!!👍 That would be my daily driver! I converted a razor mx500 with a predator 212cc! They are great motors!
this video takes me back to what i loved about you tube .. a well grounded guy with plenty of drive to make things happen and .. no big ego to feed.. no make up artist either - you dont fuck about lol
i dont know what or when you tube broke for me but i feel like a tourist most of the time.... lost without a paddle in destinations i wouldn't be seen dead in!
Appreciate that!
Try using a heat gun or hair dryer on the stickers next time you want to remove them.
Heat them, then use a scraper or razor blade to scrape them off.
"It's not even that loud"
zzzZZZZAAARATATATATATAPSH!!
Now that's the way you do it. I enjoy every bit of it. Excellent encourage man. 👏👏👏👏
You my friend are one very talented young guy. You perfected this thing all with improvising! Funny I can fix transmission problems on my cars but always had trouble with these dang things lol
woah chill your videos are too good lol! Keep up the amazing work!
haha appreciate it paul!! Just trying to give other UA-camrs a run for their money lol
As always I like before I watch
Appreciate it :))
i ended up with the chain on my shoulder one time
He's so cute and smart haha just goes to show you what determination and knowledge can do :)
I Was Inspired By This Video to do A big Engine Scoot. :) Happy to have found this video.
Pretty Sweet ! Make sure you get an" 18and Over to look it over and" Sign,'As-Is' and that You accept No responsibility for future use,and or damage to equipment or user" Letter" when you Sell,or give.: That is a pretty nice scooter.Wish we could use on sidewalks here.Really great work Vman.
Keep up the hard work buddy! Things will come around for you 👍
Great videos buddy, keep going. From the music to the bird to the reveal, excellent
Awesome process to watch totally custom motor scooter! I bought a 49cc motor scooter but I definitely want to put this motor on it instead.
Its a good idea to put up some tarps to shield your pets from welding flash as they may go blind. Nice Work..
Couldn't watch more than 3 secs before I had to stop scroll down, like the video, type this comment, and now going back to watch the rest.
fares mouhebati
I just want to say that your video are actually quality and the editing is great!!
Rai Nashi Appreciate it brother!!
Awesome builds man! Fabricators FTW! You deserve way more viewers. P.s. do some full bare metal stuff and just clear coat it, looks tight.
Science of Speed Thank you!!!
Well done kid. Ur dad must be proud 👍🏻
Thank you!
Pretty good welding. You should put it together with some lipos batteries instead of fuel. It will make it quieter and quicker i believe. I upgraded mines with 12” hubs, a phase runner controller with a 52v battery and it humms like a baby at 30 mph. Good work kid.
Love your videos I can tell you spent a lot of time on this
Thank you brother!
Built something similar recently with a chainsaw motor. Really scary to ride haha
Impressive welding skills
You did a great job on your build !
Great engineering 👍🏼
This looks like a fun little putter 😎💪👍
Buen proyecto, saludos desde costa Rica
Put a leg shield on just in case chain snaps
Lol
Very good young man, exceptional skills for such a young man, with such limited tools and equipment, A+++++++++++
NOTIFICATION SQUAD!
You will get there brother..you have many skillz... and soon they will pay the billz..keep it up👍
Thank you brother! Wouldn't be possible without you and subscribers!! will keep grinding
Awesome build
You have a very bright future ahead of you!!!
Great job man... I'm impressed!!!
Nice intro. I'm glad you got an air filter! Your neighbors will be happy you got a muffler. Paint looks great! Do you know what type of scooter that is? I might want to build one similar. Great video! Great thumbnail too
Appreciate it!! E-Zip 400 Electric scooter. I actually found an advertisement of the same one, check it out: ua-cam.com/video/NDuGqxq1J0I/v-deo.html
Thank you!
@@VasilyBuilds 😂😂😂15 mph...
Always wear those ear helmets. Great build.
10:40pm Squad ✔️
that things chain is thiccc
Oliver Motorized 😂
Dang, youre a badass man. Respect
Solid work, you did a really nice job...
Thank you!!
Your builds are 100 times better then cars and camera. If you had their sponsors you'd be set. Time to reach out to go power sports
I have, they told me they would send me parts for my new build, but still haven't due to holiday rush
Congratulations
Eh I contacted one of their guys on the 10th of december, it is the second now, and still no parts :(
Vasily.me gusto tu respuesta.eres un joven muy inteligente.te felicito.te seguiré en tus proyectos.ok.goodday.
Sick videos man! I watch them every day!
Thank you!
Good job man keep up the good work!
Thank you!!
Awesome video! Wish I had a welder so I could do this stuff
Thank you! You could start off with the harbor freight brands
There are very affordable welders available especially stick welders. So make your dreams come true.
100% !! The flux core welds will be harder to master, Stick makes prettier welds. It takes alot of practicing to be able to weld thin metal with a stick welder though.
Go to orchelns if you got one around and get you a simple 120-130amp 110-120 volt MIG and make sure you get Flux core wire. Costs about $200 total going the cheap way. I personally started on an Arc welder with 6011 rods and once I got comfortable I went to MIG and it was like spreading butter on bread it was so easy. You don't have to be a certain age to buy a welder and if you're young then ask for one for Christmas or your birthday haha. Good luck!
@@Chevy-tc9sf I love 6011 ;) but 7018 is prettier
That scooter is so cool!!! If you still have that BMX gas bike we should see which is faster when I fix what is wrong with Wally lol
Appreciate it!! The bmx bike is clapped out too :(( I got to fix it soon..
I just really broke wally lol taking it apart on live stream @@VasilyBuilds
Cooters Carport that was some serious Carnage. First thing I thought was how in the world?
First video I see that you made, definitely subscribing
Very nice m8 u should paint wheels white to make them stand out
Good job buddy, I keep checkin you out.actually have 2 wheeler collection (12) from ezip 400 to couple brit.iron triumph n a norton wish i was yer age agin . i'm 62...stay with it✌
The connecting rod in the engine from factory are very cheep and are not ment for high rpm. If you want a connecting rod for high rpm, you can get one from go power sports or a proformance company so the rod will not break and damage the block.☺☺
Cool stuff man.
Well done m8 looked proper
Loved it bro keep It up man!!!!
The music is nice
Great video!! Just a couple of tips:
Metric bolts aren’t stronger than sae bolts. It’s just a different unit of measure. You have to look at the grading of the bolts to determine “strength”.
You need to put more tension on your chains. This is why they keep coming off/breaking/rubbing. There should only be a few millimeters of slack in the chain at the center point between the two sprockets. Yours always seem to have an inch or more which is really bad.
Keep up the good work! Great channel!
giuliasprint67 Great advice thank you! Need to tighten the chain. I was told that finer thread bolts hold more force because of less steep angle
You are correct that finer thread bolts have more holding power. The thread size is called the thread pitch of the bolts. Metric vs SAE (inch etc) is just how the bolt heads and threads are measured; not a reference to their strength or actual thread pitch.
For stronger bolts you want to look at the grading of the bolt. Like a grade 8 bolt vs a grade 10 bolt.
www.hunker.com/13415083/what-are-the-different-grades-of-bolts
www.boltdepot.com/fastener-information/Measuring/TPIandPitch.aspx
www.albanycountyfasteners.com/blog/2018/03/19/coarse-thread-vs-fine-thread-fasteners/
Enjoyed the build I've had a lot I like building the razor drift karts as long as you know how to use your 2 hands an have a little common sense you can put a motor an anything
ok now that i seen part 2 i see the seat is back.
dang you did allot of work to it.. more than i am willing to do to mine, my ryobi s430 engine i think may not be enough..
maybe do a go kart engine..
Fantastic job
I think you should get a 92-95 honda civic project car 💪
I don't know man, the hassle of buying another project car, when I already have a project car sitting in the driveway. And it's been done plenty on UA-cam. I might consider it in the future. But I do wanna turbo my red car
Bravo e geniale un saluto dall'Italia!!!
Looks great buddy. Hope you can get some help with the next build. Wish I could help but I’m very poor. Good job
Thank you!! I opened up Patreon just for the younger teens
Looks and Sounds Great!!!!
Nice work bro..
Good job. I like it. Support together
Great welds kid🎇🎇🎇🎇🎇🎇🔥🔥🔥🔥🔥🔥🔥
Good job man
Damn that intro👀💣
Appreciate it!!!
And we're did you get that air filter adapter from. If you could provide a link that would be great!
www.ebay.com/itm/Air-Filter-Adapter-for-79cc-Engine-Motorized-Bicycle/262794256918?hash=item3d2fc22216:m:mGuKaAmtlWlKVBY8fIwlvfw:rk:2:pf:0
@@VasilyBuilds awesome thank you!
Awesome just picked one up with a 49cc 2 stroke ...i want to fit a 212 on it i have...👍
Sick wheels
sik build bro.... looks awesome,, goes well to
Grip tape on the foot plate might look nice if it’s cut correctly.
You could of probably fit a 212 on that with some mods and you would have 45 mph scooter😂
Definitely. I didn't want to put too much resources on this scooter
@@VasilyBuilds how much was the 79cc predator motor? Cuz with coupon a 212 predator is 99 at Hf tools.
Eric Coen 79cc retails for 99.99$$ 212cc retails for 114.99$$. they don't let you put 20% off coupons on engines so I bought mine full price
@@VasilyBuilds I guess so the cops out here are sometimes nice or not nice
ddrusa yeah
who keeps turning off my notifications for this channel particularly
Logan Hawkins TV 😂
hope u sell some scooter some day bro lol like it so much... :)
This is awesome!
I found the predator engine at harbor freight, what clutch, gear cog at the engine and rear sprocket do you recommend?
My guess is that that bird is a Finch :)
Yo this is such a good video!
Thank you sir!
@@VasilyBuilds my build is crazy is need alot of stuff done with it but it will pay off this video gave me more thoughts 😀. Tomorrow is the shipment of my predator 212cc engine can't wait to do some mods like you did 😋
Wish you good luck! Set your mind to it and be sure you have extra money just in case
Thank you for the advice because this build is going be hard to do the bolts are rusted on and it's for the engine so I need to figure out how to get that off I didn't even get it off today but I probably need WD-40 and leave it over night
But yeah good luck on future videos I hope you reach your goal 🙂
Nice video
Nice job
Good job.
Did you take the governor off the motor ? It will hall butt if you take it out its pretty easy just check cars and cameras .
SUBBED !!!
Good build kiddo......shoulda left the power switch there on the neck and put a sticker above it that says "nitro boost"
Haha
I just did the same thing with a Schwinn scooter and an old pocket rocket engine. Waiting for master links to give it a full test ride but from the little ride I took it has a crazy amount of torque. Full throttle going like 15-20 still pills the front end up. I'm not gonna have much of a top speed though like yours
Awesome !! Only thing mine is missing is some torque. Those 49cc 2 strokes are just slightly weaker than a stock 79cc
I just love the torque they give out for so small of an engine. Plus they're only like 52 bucks for a brand new engine on eBay
Dang thats not bad
@@rjwhipple8896 suggesting you replace the carb and coil with some better quality ones because those are the weakest points on those
@@Nograc_ trust me I know I've had this engine for a couple years and went through 2 carbs and 4 coils.
Good job! However, good luck on that bent seat-post. Doesn't look like it's going to stay in one piece for long!
It is shcedule 40 piping, should stay
Nice intro