Reefs 900LP 4S Servo is INSANE!
Вставка
- Опубліковано 1 чер 2024
- THE MOST INCREDIBLE SERVO EVER!! reefsrc.com/products/900lp-sm...
Exocagedrc paper weight exocagedrc.com/products/3d-tp...
These are my Affiliate links, they really do help the channel if you use them, Thank you
AMain bit.ly/2RsdBVl Amazon amzn.to/49fwQnL Horizon bit.ly/4b8l0xr Tower Hobbies bit.ly/3HyQijk
Exocaged RC exocagedrc.com/
Radiolink RC8x
Amazon amzn.to/3TzFE31
Flysky GT5
Amazon amzn.to/48qfPH4
If you would like support Exocaged RC Directly, consider being a channel member. Cheap monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. Take a look! / @exocagedrc - Розваги
Joe, you are turning me into a servo snob. That this rips!
We NEED that servo for our Sledge
I think you would have a blast running at ecc. If you need help figuring out the scale pts. I would be glad to help you. Maybe even look into traveling up to super shafty fall crawl.
Reefsrc presented by AGF servos 😆
More like agf servos presented by reefsrc seeing how the only thing thats reefs rc is the logos.
Yes but it's only $100 more for the Reefs logo 🤣
@@user-fk8zx8li7b lol I didnt want to offend the reefs fanbois here😁
@@themountain59which AFG servo would this model be?
Id like to see a comparison between this servo and the NSDRC RS800 on same voltage
I would agree but unfortunately I don't think Joe messes with NSDRC at all. I would love to see him try some but he's a Reefs guy it seems. If I'm correct though the RS800 isn't low profile. That would be the RS650 which is 950 oz at 8.4 volts. I asked him before about testing the RS-2500 V2 vs the beast 2000 for my Raminator 👊👊👍👍
@@Addicted_2RC The Rs700v2 would be the direct competitor to the 900lp they are both low profile and direct power up to 4s. In normal driving I doubt you could tell the difference though because they are so close in specs, Rs700v2 (1115oz .09 at 16.8v) 900lp (920oz .08 at 16.8v) your wallet is definitely going to tell though since the Rs700v2 is over $50 cheaper. I've been a NSDRC guy for awhile now but I do wish they could be programed like most of the reefs can.
Rs700 for the correct comparison. 960 vs 1115
Have you tried a servo programmer? Perhaps a agfrc or reefs would work unless those 2 are the same internals lol @Steve_J81
@@redndeyes It doesn't work unfortunately.
I need 3 brothers to make a lp g13 pro! The absolute best servo out imo.. I know you're a Reefs guy, Joe, but with my experience, they dont compare. Reefs get noisy and lose some power it seems like very quickly after a few hard runs (im not easy on them), but the G13 pro can't get enough of my abuse 😂 plus $100.00 compared to most at $150 to $180 or so is a no brainer imo. G13 pro is 850oz with 0.090 sec/60° on 4s Dp
Insanely expensive
1Tenth bmf1095l low profile servo is 1200oz in at 4s
Reefs is 920oz in
Iv been using the bmf1095l for a while now, it's my favorite servo
Nsdrc rs700 too at 1115oz-in. Reefs aka agf a little behind heh
Go for WRCCA Performance Scale comps, no scale points and no winch needed!!! Btw. RS700 in my Vrd😊
You should trying a poizd t3v2 build soon. You’d be shocked what it can do
👍👍😁
Getin one ! 🤫🗿
All the sorrca rules are the reason I left that seen. But I think you’d be great at it. You can drive. But you will need a winch.
I'll take NSDRC over Reefs every time
Where can i get the STL file for those? I work in a hobby shop and would love to print and display on my desk!
👍😀🤺❤
💯🤸♂️👍
🤷♂️😁
👍😁😎✌️
😴😴😴
@@ohnoadventures I was awake when posted your video but I fell back asleep lol
that servo cost's more than my 3s 1/10 scale..
Only $100 more to have it badged as Reefs and not AGFrc A75BUMW the manufacturer. The Horizon Hobbies tax is getting higher and higher.
Have you done anything more with the coyote chassis? If you have that would be a great chassis for a c2 build. I’m not a big fan of sorcca since they changed the rules and allow one company to slide on tires while telling another one they don’t look scale enough, you know the two I’m talking about. I recently built the coyote chassis as a c2/cheater style rig and it’s awesome. When I say as long as you can get the skid over the obstacle is done that’s no joke and I don’t have my forward bias right yet. I think my forward bias is around 59/41 ish so I’m thinking on this rig with a 60/40-61/39 would make this rig unstoppable.
Screw that ! Buy a g13 from 3 brothers for a 100 bucks and it’s awesome. Reefs is way way overpriced
I can't get into the scale stuff. It's OK right up to the point it starts to interfere with performance. Then it's "stupid scale stuff". I want my rigs to work great, I want cartoonish un scale performance.
I also don't take RC that serious, it's a fun, relaxing thing for me. The more rules involved the less fun and more like a chore it becomes.
I can understand classes by tire size and or wheelbase but other than that let guys get creative and have fun.
Nah if you cant handle backup rules. You probably shouldn't be competing. Besides your a basher guy, the people want to see you jumping and running a dirt track.