Easily the best BMW DIY channel on YT. Nice work. I imagine all the corrosion you're dealing with on this car is due to your location and the likelihood that your car probably spent its first years of life outside, covered in salt, and rarely got an undercarriage washing.
1. Great video 2. Very detailed 3. Alot harder than it looks. 4. Now i know why its expensive to swap turbo. 5. Cant wait to see next video and final results. Thanks for the video, much appreciation😎👍🏻
I own a n54 motor and i always have to take the subframe out if i need to do work on the turbos. I am very surprised that for the f30 N55, you have the option not to remove the subframe
Awesome stuff! Can you do an episode on changing the rear diff to a higher final drive and an LSD? I'd love to have shorter gears on my F30 335i m sport w/ 8 spd ZF 8HP trans.
Is all the engine support mount stuff due to xdrive? Im sure the dinan instructions i read once were simpler, obv on a RWD car. Anyway id be getting a mechanic to do it!
Hey Kies thanks for such a nice video. Besides changing oil and filter and the turbo oil lines is there anything else someone going for a pure stage 2 turbo should do in terms of maintenance or to make sure the car runs fine with this setup?
Hi guy's I have a 2013 328i and it smokes when starts when it's been 2+ day's without turning on. I would love some advice. I all so saw your video about the n20 engines and the lawsuit against BMW. Mine is at 66k but I'm in Florida and my vehicle is doing ok but very stressful to know my engine could go bad any time. I would like some advice on what to do. Love your instructive videos. "Great job"
will like to upgrade mines on my 2015 f30 335 RWD later on. how is that new turbo upgrade holding on so far? and after you did the upgrade what tunes did you throw on it to get the most out of the new turbo? btw thanks to your video you gave me enough confident that I can doit on my car. =]
Easily the best BMW DIY channel on YT. Nice work. I imagine all the corrosion you're dealing with on this car is due to your location and the likelihood that your car probably spent its first years of life outside, covered in salt, and rarely got an undercarriage washing.
This is an in depth lesson in painful turbo removal. Nice work.
1. Great video
2. Very detailed
3. Alot harder than it looks.
4. Now i know why its expensive to swap turbo.
5. Cant wait to see next video and final results.
Thanks for the video, much appreciation😎👍🏻
Вы молодцы
Вы красавицы 🔥👍🏼
This is amazingly involved!
U don’t say!
Good informative Video, waiting to see the results of the upgraded Turbo, perhaps a Dyno run.
Thanks
that engine bay is very packed
Yea, it’s no joke
Awesome videos. Great details and camera work
this channel deserves way more views and subs! btw can you guys KiesMotorsports my f32?
Thanks! Lol we can help with your car!
Is there anyway you guys could hook me up with an msport steering wheel?
I own a n54 motor and i always have to take the subframe out if i need to do work on the turbos. I am very surprised that for the f30 N55, you have the option not to remove the subframe
N55 turbo swap is so much easier then the n54 wish I had a n55
That might be the first time I’ve ever seen anyone say that
It did but I was the first one to watch it
Sorry everyone, we uploaded this and had an audio issue, so we had to pull it down, fix it and re-upload..
Hey Brian, are you still running just the stock injectors or did you do a meth kit/secondary injectors kit?
Another upload?
I bought a bmw f30 328i because of Kies Motorsports.
Last video had some audio issues, so we reloaded it..
Kies Motorsports are you going to dyno the car after installation?
I love my 328i..🙂
Awesome stuff! Can you do an episode on changing the rear diff to a higher final drive and an LSD? I'd love to have shorter gears on my F30 335i m sport w/ 8 spd ZF 8HP trans.
If you are replacing all the coolant and oil lines do they still need to be disconnected from the turbo to remove the turbo?
Do you have to put a custom tune after installing stage two turbos?
Is all the engine support mount stuff due to xdrive? Im sure the dinan instructions i read once were simpler, obv on a RWD car. Anyway id be getting a mechanic to do it!
Would it have been easier to take the engine out?
Without filming, this isn't that bad lol
you crazy right?
I think with a rack it would be
This is insane, you know i actually was goin to try it, not no more after watching this video,, too many pieces man smh
Would this be similar to e92?
Wait a minute. Is that cliff. Or is that just Brian with glasses. 🤔
Kies Motorsports Do you know if the Dinan Stage 2 Turbo for the F30 fits on a 2012 BMW 335i build date April 22nd of 2012.
Hey Kies thanks for such a nice video. Besides changing oil and filter and the turbo oil lines is there anything else someone going for a pure stage 2 turbo should do in terms of maintenance or to make sure the car runs fine with this setup?
What you used to lift the motor, not the support bar doe, my tow hook won’t fit on my motor
Hi guy's I have a 2013 328i and it smokes when starts when it's been 2+ day's without turning on. I would love some advice. I all so saw your video about the n20 engines and the lawsuit against BMW. Mine is at 66k but I'm in Florida and my vehicle is doing ok but very stressful to know my engine could go bad any time. I would like some advice on what to do. Love your instructive videos. "Great job"
where does it smoke? Engine room? Then it may be the Valve Cover gasket. Common Problem with BMW. you can DIY with a bit of knowledge.
Nice videos! With all this torque is the 8HP45 realiable??? I though absolute max torque was 500Nm, arent you worried?
Is this easier than n54 turbo swap seems like it
will like to upgrade mines on my 2015 f30 335 RWD later on. how is that new turbo upgrade holding on so far? and after you did the upgrade what tunes did you throw on it to get the most out of the new turbo? btw thanks to your video you gave me enough confident that I can doit on my car. =]
How did the install go? I also have an f30 RWD and planning on doing the install myself
How did your install go? Im getting ready to do the install myself
Taking the engine out is the faster way, trust me
Hey Bryan, it seems like a lot of work.. How much would you typically charge for it?
Muhammad Ali ..... ive been quoted $1000 for the swap.
Why drain the oil? Coolant, yes, but why the oil?
This is quite possibly the scariest vid I’ve ever seen
I feel like it would be cheaper to buy a car with an upgraded turbo already installed 😂
3:41 😏
Hi h'is your bro?
I would rather just drop the subframe with the engine on it and get everything without the frustration
Wow, way too complicated, if you do own an F30 pray to god the turbos don't go bad!
(Googles installation cost for pure turbo....)
600 to 800 so far that i see
Is your car pwg or ewg?
Pwg
@@markyrose79 For EWG cars, you need to adjust wastegate with ISTA+
Are you twins??
Lol not even related
Nightmare I'm selling my car f this
WHY GERMANS?! Why?!!!!!!