how did you hold the first layer of the spoilboard down to the frame? Please don't say T nuts but... if you have to say it. I'm thinking even glue. I also hope that you didn't have to put L brackets on the "joists" use tnuts, and then screw from underneath.
I am sorry to say, but here's how I did it: I affixed 12 wood blocks with slide nuts and angle brackets to the inside of the base extrusions. Then I used #10 countersink wood screws to attach the plywood to the wood blocks. MDF is then glued on the surface of the plywood and surfaced.T-track (if desired) is drilled and bolted on with M4 countersink bolts. I hope this helps.
Hi, your machine is 1000 x 1000 I assume? What size spindle did you go for? I’m thinking of a 2.2kw ER20 for my 750 x 750… it’s around 6kg net weight which I don’t think will be a problem for me, but interested in what you are running here with Archy.
how did you hold the first layer of the spoilboard down to the frame? Please don't say T nuts but... if you have to say it. I'm thinking even glue. I also hope that you didn't have to put L brackets on the "joists" use tnuts, and then screw from underneath.
I am sorry to say, but here's how I did it: I affixed 12 wood blocks with slide nuts and angle brackets to the inside of the base extrusions. Then I used #10 countersink wood screws to attach the plywood to the wood blocks. MDF is then glued on the surface of the plywood and surfaced.T-track (if desired) is drilled and bolted on with M4 countersink bolts. I hope this helps.
What are the table dimensions
The table is about 780x and 750y
I have around 120mm vertical with my spindle.
Where can I buy one?
Hi, thanks for watching. I bought my kit from Bulkman3d.com. #notsponsored
Are you going to do a demonstration and review?
Yes, my plan is a series of tests and reviews. It does take a bit of time to produce a decent video.
@@CNCMakerNW Thanks!
How do you grease the machine I can't figure out what grease gun to use
I will post a video with a how-to on greasing soon
Here is the tip I use for greasing. LockNLube Narrow Needle Dispenser a.co/d/8hU6ACO
@@CNCMakerNW thanks I'll have to order one
Hi, your machine is 1000 x 1000 I assume? What size spindle did you go for? I’m thinking of a 2.2kw ER20 for my 750 x 750… it’s around 6kg net weight which I don’t think will be a problem for me, but interested in what you are running here with Archy.
@@bernieinsaudi it is 1000x1000. I went with a 2.2 KW spindle. It can handle it,.