A very nice video that explains the assignment of buttons on the throttle. I also added your profile to SPAD-neXt. But I have to press the switch for the parking brake twice after setting it so that it is released again. Do I have to change anything in your profile so that it works like it does in the video (only release the parking brake once)?
I was hoping that in this video you would have gone into the controls menu and shown which commands you set ur switches to. I was trying to map a command for the fuel cut-off switches which I saw you did. I did hear you mention engine master switches, but when I tried to map the controls to it nothing worked.
Hello, thanks for the good video, my question: When i change it with spad, are these setings fix and than for all planes? Or is it speciffic and only for the pmdg? thanks
Hi, how do the MSFS device setting influence the profile/snippet, are they overruled or should I use the Default profile. In other words, does changing the buttons and dials have an effect in combination with SPAD?
You have to have the alpha version of spad.next, and then when you select a control there should be a button for online snippets. Searching for “zulu” should filter it to my snippet.
@@InformationZulu I actually managed to convert it, it is really easy, just find the same command but NG3 instead, idk if i can share it to you, it works btw
Hi there...great video..thanks! One question for you...are you having issues with the engines not responding over idle when you advance the levers? I had this issue and had to delete the mapping on spadnext for the fuel cutoff levers...very strange solution but now everything works as advertised....curious to know if you or anyone else has experienced this...seems like it just started happening after the latest sim update...cheers
@@InformationZulu That's the problem, doing a search in this sped next for the title you give results in nothing. seriously if your going to use some random site that nobody has ever heard of, at least put a link. Thanks for the reply but this is completely useless. Lastly it's not complicated to show, all you had to do was open your controls settings on msfs
MSFS control settings are all turned off. This tutorial is for a 3rd party add-on called SPAD.next that does custom control mapping. It has a built in preset publishing system.
When i pull the reversers back I used SPAD to send the repeat key for Throttle decrease (F2 or F3 i think). When the reversers are pushed forward into the zero position i send throttle cut (F1)
I just updated my SPAD to 0.9.13.34 and looked in online snippets. Under TCA Q-ENG i can still see my INFOZULU PMDG B737-700 snippet. (Uncheck “only for current aircraft”?)
@@InformationZulu thanks but weirdest thing is I still can't find it?? I wonder is it because I'm on the trial on SPAD or maybe SAP thinks the hardware is different? Have you published the profile?
A very nice video that explains the assignment of buttons on the throttle. I also added your profile to SPAD-neXt.
But I have to press the switch for the parking brake twice after setting it so that it is released again. Do I have to change anything in your profile so that it works like it does in the video (only release the parking brake once)?
same problem for mi and the auto brake dont work
Love your videos. I had given up on trying to configure the quadrant but thanks to use diligence, I (we) all have a way to make it work. Thank you!
I was hoping that in this video you would have gone into the controls menu and shown which commands you set ur switches to. I was trying to map a command for the fuel cut-off switches which I saw you did. I did hear you mention engine master switches, but when I tried to map the controls to it nothing worked.
This is what i'm looking for too. I'm looking for a video that shows exactly which inputs in the controls menu he used.
me too @@rampy01
Yeah….I was hoping the same. It didnt tell us how to do it at all.
Hello, thanks for the good video, my question: When i change it with spad, are these setings fix and than for all planes? Or is it speciffic and only for the pmdg? thanks
Can you achieve the same with AAO ?
ok so where do we download this thing why don't you just make a video of you inside the control options and show us what you did to bind them ??
How to set the Engine Master levelers up? PLS HELP
Thanks for all the help! I am having a big problem getting the throttles to idle at 20-21% as in the video. They idle around 45-50% instead.
Hi ! Do you find how to do ??? 😅
Hi, how do the MSFS device setting influence the profile/snippet, are they overruled or should I use the Default profile. In other words, does changing the buttons and dials have an effect in combination with SPAD?
Generally if i’m using spad all the revelant controls in MSFS settings are unmapped so they dont conflict or fight each other
@@InformationZulu so I should unmap all buttons, thanks. I'm trying to grasp SPAD but it's still a bit of a black box ;-p
Hi, nice work, where can we find the snippet/profile? I'd love to use it!
You have to have the alpha version of spad.next, and then when you select a control there should be a button for online snippets. Searching for “zulu” should filter it to my snippet.
@@InformationZulu Super, I'll give it a try tomorrow, is adding snippets to a profile easy?
I think you can choose to load a snippet for just one control or the whole device. But I would test in a new profile first just in case.
I want to know the engine master switch key setting Please let me know
Do you solve the landing gear problem?
Well done Zu...😊
Cheers JET. Appreciated
Jet, where you able to locate Zulu's snippet?
@@donrickey123 Zu has responded..
@@jet4926 I think I have seen all of his responses, but I assume you were not able to or did not need to locate it. Correct?
@@donrickey123 Yes I saw, that's why I responded.
Any Chance to import this to PMDG 737-800??
I think same controls would work but i will also do an updated snippet publish for that asap. I didnt buy the -800 yet. Stand by
@@InformationZulu I actually managed to convert it, it is really easy, just find the same command but NG3 instead, idk if i can share it to you, it works btw
@@lucaverzura1352 awesome!
Hey I downloaded your snippet but can’t seem to get the speed brake + flaps working properly
@@George-vn7co which preset? Mine or his?, speed brakes should work flawlessly by default since fs2020 axis is red by pmdgs, what’s wrong with flaps?
Hi there...great video..thanks! One question for you...are you having issues with the engines not responding over idle when you advance the levers? I had this issue and had to delete the mapping on spadnext for the fuel cutoff levers...very strange solution but now everything works as advertised....curious to know if you or anyone else has experienced this...seems like it just started happening after the latest sim update...cheers
It would help if you showed your actual in game settings and bindings for the controls, rather than just showing that it works
Theyre complicated to show so i published the preset instead. Name is in the description if you can find it in spadnext
@@InformationZulu That's the problem, doing a search in this sped next for the title you give results in nothing.
seriously if your going to use some random site that nobody has ever heard of, at least put a link.
Thanks for the reply but this is completely useless.
Lastly it's not complicated to show, all you had to do was open your controls settings on msfs
MSFS control settings are all turned off. This tutorial is for a 3rd party add-on called SPAD.next that does custom control mapping. It has a built in preset publishing system.
What are your settings for the full reversers
When i pull the reversers back I used SPAD to send the repeat key for Throttle decrease (F2 or F3 i think). When the reversers are pushed forward into the zero position i send throttle cut (F1)
@@InformationZulu thank you
Best all work!!!! thx a lot men
Hello, the profile is no more available on spad, can you re share it please?
Thanks
OK its been a while since i made that video. I’ll take a look!
I just updated my SPAD to 0.9.13.34 and looked in online snippets. Under TCA Q-ENG i can still see my INFOZULU PMDG B737-700 snippet. (Uncheck “only for current aircraft”?)
@@InformationZulu Hello Information Z, I found it. Thank you for your time.
Awesome! I hope it works for you
Sympa la video, mais vous n'expliquez pas comment les reglages sont fait? Donc vidéo inutile merci quand même.
Nice Video, but i cant find INFOZULU PMDG B737-700 TCA Q-ENG 1&2 040722 profile
I couldn't find your snippet either.
@@АлексейДавидович-ш2ч Same
Here's a screenshot from SPAD.next
ua-cam.com/channels/wUOv8_NNeLaFrjtUpO-VqQ.htmlcommunity?lb=Ugkxk8xPnUZOoPPQA8ZwOMsh5Cg3Fb8Qi_Dz
see screenshot in post below
@@InformationZulu thanks but weirdest thing is I still can't find it?? I wonder is it because I'm on the trial on SPAD or maybe SAP thinks the hardware is different? Have you published the profile?
I Have been watching your Live stream In LAX Lobe it
Thank you so much
Where i can download it?
PSXT can be downloaded from lekseecon.nl
Downloading the AI plane models try AIG-OCI from Alpha India Group website
@@InformationZulu I'm not talking about traffic, but about your quadrant configuration settings