Wow! FINALLY. I’ve been trying to figure out a way to get this to work and now my reversers are working just like they would in the Airbus which makes it so much easier! Just tested this on a rejected take off and everything worked perfectly! Thank you!
I bought the PMDG-777 as my first Boeing or even Aircraft with an irl yoke a week ago and since then I was trying to set up my Thrustmaster Officer Pack and you are the first one to actually get it perfectly explained and working! Thank you so much!!!
I did everything as in the video, but the reverse does not work for me. It activates literally by 9% and then to switch to gas, I need to click the mouse in the cabin itself
It does work, but it seems that you have to start the engine to see it working entirely. The reversers won't work when you are on cold and dark on the apron.
@@molotkovdmitry Yes, the problem was that I checked when the plane was not in motion. As soon as I accelerated and turned on the reverse, everything worked
Thank you for this. My only issue now is that I have to check reverse axis to make it go in the correct direction, whenever I'm out of reverse thrust my plane shoots forward for some reason, and everytime I exit the menu back into the game no matter where the stick is, it's always full power.
Very good tutorial. As I am sure you are aware, you can adjust the sensitivity so that Reverse Thrust is not always at 100%, it can be graduated exactly as you want by where you put the levers in reverse thrust, exactly like the forward thrust.
I am not sure what I am doing wrong, I have your exact setting but it not fully registering like yours in the video. Its almost if I need to calibrate it with the 737 but nothing in the menu.
Thanks again for your Boeing profile. I have bought the Black Square Turbine Duke and cannot set up my TCA Airbus panel to work properly with reverse prop pitch. Do you have any advice on this. Thanks Paul
ABOUT THE DETENTS!! If you want to remove them, you can find 2 plastic pieces under the quadrant held in with two screws each. They are right under the actual levers themselves. You can un-screw these and remove the detents as a whole. When you want them back, just simply screw them back in. The ridges should be facing up towards where the levers would be at 100% throttle
Any idea why pmdg 777 when I moved the throttles from full to idle it also changed the flaps from 25 to 20… even tho the throttle has nothing to do with the flaps in settings..
Tried so many tutorials for this issue! Found one that semi worked but not happy with it. Never seen it done like this before. Look forward to trying it when I get back!! Thanks as always 😁👍🏻
I am really desperate... I have seen this tutorial and other one which are same settings, but even if I follow 100% all the steps, its not working for me - the IDLE to TOGA works fine, when I engage REV buttons and move to REV, PMDG will respon with REV idle (first position) and then its stuck here no matter what... I have to click with mouse to the REV lever in order to get the throttle back in control :(
Same for me. The reverse does not fully engage, but then the levels stay stuck in one position and nothing moves. I created my setup by duplicating the default.
I'm also having this issue, with this throttle as well as with other throttles. Seems like a bug with PMDG as I don't have this issue with other planes.
Found a workaround. You can assign button 1 to "Toogle reverse thrust". Once you move the thrust levers out of the reverse position into idle, just click the button twice and reverse deactivates. Not realistic but oh well..
Thanks for the video. Just recieved my airbus trhottle quadrant but i have problems binding the right axis. IIn the windows device manager i have turned on the virtual buttons option. I copied a profile to PMDG. Once in the 737 i can move the throttle up and down and in game same happens until i activate the reverse thrust on the trustmaster quadrant, the PMDG throttles get stuck. Once i delete the binding in MSFS i cannot rebind the throttles as i can only bind buttons...Can you explain how you mapped engines 3 and 4 to the quadrant?
great video thank you so much, i have a question did anyone find a way to make use of the eng 1 & 2 levers aswell as the autobreak or are those just dead on the pmdg 737 and 777? i cant find a way to do it, thank you for any advice!
Thanks a lot for this video. I tested it for the PMDG 777/Msfs and it works. One Question. Did you also have a instruction for the engine start with the Thrustmaster Airbus TCA?
@AirNOTT I tried doing the same as per your video for thr pmdg 777 but when my tca is at idle,the throttle in the pmdg777 is at around 25 percent throttle...any fixes please? Love the videos.❤
@@AirNOTT that’s true, I’m interested to see how long I’ll have the due diligence to unscrew and replace the little thing at the bottom when switching aircraft types before I just push through them aswell 😅
Hello i have followed your tutorial regarding the set up of the TCA but what happens is the following.when i try to activate the reverse on engine 2 instead of reversing it goes full throttle.any chance to explain me what happened here?thanx in advance
I've found your video a lot different from others on UA-cam, specially thrust and reverse setup and sensibility. In any case i'm testing it now. I'd like too a way to use the Eng on/off of Tca Throttle quadrant for cutoff option ( when reaching 25%), do you believe possible? Many and many thanks
Great, however it did not work on Boeing 737 MAX, maybe it does for the PMDG, but I would not buy PMDG to trail my Airbus quadrant. i was about to buy the 737 PMDG pack... Thanks anyway for the great video.
I have the bigger airbus throttle pack with the speedbrake and flaps etc however the auto brakes and as you may have noticed engine starters dont work on the boeing and if it does I haven't found a way to do it
Hi there, I am using Airbus throttles for PMDG 738 which is set up following your settings. I noticed when thrust reverse goes to idle thrust my auto brakes disarms. Would greatly appreciate your help on this. Thank you!
@AirNOTT have you ever run across where the 737 throttles with TCA Airbus become unresponsive? Like when you hit reverse it doesn't do anything no movement from the throttles in-game?
Can you help me setup the Airbus TCA Throttle Quadrant for the A340? I'm using your settings for the 4 engines (and only dual throttles on the thrustmaster) but I cannot for the life of me get them in cl, flex togo etc. i'm going crazy here.
I did all you said in the video and it works but I have an issue where one of the levers on the 737 randomly rolls back without me touching it especially when setting toga thrust dont know whats happening anyone can help?
Does the pmdg 737 still work properly if you have a side stick? (before anyone says just buy a yoke, I don’t have a lot of room and I don’t really want to buy one for 1 aircraft)
Nice Video, I almost got it working, however the reversers in the aircraft gets stuck (id say about 20 percent extended) when I enable reverse thrust on my physical throttle. I did bind Buttons 12 and 16 to Thottle 1/2 Decrease. The only way I can unstuck it is by manuelly resetting the thrust reverse levers inside the aircraft. Did something similar happen to any of you and does anybody know how I can fix that problem? Maybe there is a setting inside the aircraft that I missed?
@@Marco-vp1fy Thanks for your reply, but the Issue has actually fixed itself: It seems that the thrust reverse freeze only occurs on ground / when parking. I have flown about 3 approaches and it worked everytime without a problem.
It all worked apart from once I put it in reverse, it's stuck there..? Any ideas mate? I can just tap F3 to take it out of reverse but can't figure out a way to fix it
@@kingbarnab344 I did fix it but I’m not sure how, I have a feeling it’s because I tried it with nothing turned on on the aircraft because after that comment I did a flight and it all worked fine. Not sure how it would make a difference but it did
Anyone else here had the issue that it selects reverse but then doesn't come back out of reverse when moving the throttle levers back to idle? Only way i can get it out of reverse is by moving the levers in the cockpit with my mouse!
@@toastedtea I figured it out in the end, turns out you have to have engines running! I was trying to set it up with the engines off and it wouldn’t work. As soon as I fired engines up it all worked beautifully
Using the "decrease" to move the throttle to reverse is just brilliant! Thank you!
Wow! FINALLY. I’ve been trying to figure out a way to get this to work and now my reversers are working just like they would in the Airbus which makes it so much easier! Just tested this on a rejected take off and everything worked perfectly! Thank you!
I bought the PMDG-777 as my first Boeing or even Aircraft with an irl yoke a week ago and since then I was trying to set up my Thrustmaster Officer Pack and you are the first one to actually get it perfectly explained and working! Thank you so much!!!
Love the “agnostic” setup - makes practical sense!
Tell that to the commenters 😅
I did everything as in the video, but the reverse does not work for me. It activates literally by 9% and then to switch to gas, I need to click the mouse in the cabin itself
It does work, but it seems that you have to start the engine to see it working entirely. The reversers won't work when you are on cold and dark on the apron.
Did you fix the problem with reverse?
@@molotkovdmitry Yes, the problem was that I checked when the plane was not in motion. As soon as I accelerated and turned on the reverse, everything worked
After watching 20-ish different videoes, finally I found one that makes sense.... and works first time. Thank you. 😁
Glad it helped!
This is so much helpful! The default only work for an Airbus, not 738. Love it! Thank you!
BROOOO THANK YOU SOOOO MUCH I had so many problems watching other videos but now it works PERFECTLY!
Tried every setting as is, the throttle didnt move an inch though in settings the bar moved...
You need to restart the plane
Absolutely what I needed to use my TCA Throttle Quadrant for the PMDG 777. Amazing thank you! New subscriber here.
Subscribed so instantly! Thank you for clear and concise explanations. Keep bringing us more contents like this.
Thank you kindly! Maybe catch you in a live stream soon 🙂
Thank you for this. My only issue now is that I have to check reverse axis to make it go in the correct direction, whenever I'm out of reverse thrust my plane shoots forward for some reason, and everytime I exit the menu back into the game no matter where the stick is, it's always full power.
Thanks! This helped me a lot, not only for Boeing but other aircrafts without detend and having a more fluid throttle
Sweet! Do the fuel cutoff switches work as well? If so, do you know what they’re actually called in Controls Options?
It’s my understanding you need something like spad.next for that
@@AirNOTT Ok, thanks! Maybe I’ll fart around with that this weekend.
You made the right video for me at the right moment. You saved me a lot of work! Thx, mate! 😎👍🏻
No problem! Glad it could help 👍
Very good tutorial.
As I am sure you are aware, you can adjust the sensitivity so that Reverse Thrust is not always at 100%, it can be graduated exactly as you want by where you put the levers in reverse thrust, exactly like the forward thrust.
Great, I'm using the TCA Airbus pack with Boeing - very happy with the setup but your video really helped me set it up correctly! Thanks so much....
Great to hear!
Thanks very much Airnott. I succeeded to set my Thrustmaster as your. I thanks you for the tutorial video.
You’re very welcome! Thanks for watching
I am not sure what I am doing wrong, I have your exact setting but it not fully registering like yours in the video. Its almost if I need to calibrate it with the 737 but nothing in the menu.
That works perfectly for me on PMDG 737 and Horizon 787-9, thanks and Happy 2024!
Glad to hear it. You too!
Simple but effective video. As they should be my friend. This works like a charm. Bravo!
Awesome! Happy flying!
Hello, got the levers set nicely, have you been able to set up the engine switches? I've been trying, but with no luck.
I have, but only recently. I did so using spad.next - there’s a recent video on the channel with the details
Thanks again for your Boeing profile. I have bought the Black Square Turbine Duke and cannot set up my TCA Airbus panel to work properly with reverse prop pitch. Do you have any advice on this. Thanks Paul
Great video yet again sir. 😊
Cheers! How’s that internet holding up?
@@AirNOTT we managed a stream this morning and tonight without any problem so fingers crossed it’s fixed.
Thanks!! This helped me get my throttle setup.
No problem! Glad it helped
ABOUT THE DETENTS!!
If you want to remove them, you can find 2 plastic pieces under the quadrant held in with two screws each. They are right under the actual levers themselves.
You can un-screw these and remove the detents as a whole.
When you want them back, just simply screw them back in. The ridges should be facing up towards where the levers would be at 100% throttle
Yep, very true. Though i switch between Boeing and Airbus quite a lot so it may get annoying switching them out
Hi, great vid many thanks. Do you have you engine buttons and engine crank switch setup at all with the 737?
Any idea why pmdg 777 when I moved the throttles from full to idle it also changed the flaps from 25 to 20… even tho the throttle has nothing to do with the flaps in settings..
Tried so many tutorials for this issue! Found one that semi worked but not happy with it. Never seen it done like this before. Look forward to trying it when I get back!! Thanks as always 😁👍🏻
Enjoy the sunshine!
I am really desperate... I have seen this tutorial and other one which are same settings, but even if I follow 100% all the steps, its not working for me - the IDLE to TOGA works fine, when I engage REV buttons and move to REV, PMDG will respon with REV idle (first position) and then its stuck here no matter what... I have to click with mouse to the REV lever in order to get the throttle back in control :(
same here any fix?
Same for me. The reverse does not fully engage, but then the levels stay stuck in one position and nothing moves. I created my setup by duplicating the default.
I'm also having this issue, with this throttle as well as with other throttles. Seems like a bug with PMDG as I don't have this issue with other planes.
Same here
Found a workaround. You can assign button 1 to "Toogle reverse thrust". Once you move the thrust levers out of the reverse position into idle, just click the button twice and reverse deactivates. Not realistic but oh well..
Absolutely nothing wrong with your set up using yoke and airbus throttle some people just love a good moan mate. Keep up the great work 👍🏻
Well said
Hiya, how do you do the hold button, then increase power one? Thanks.
Thanks for the video. Just recieved my airbus trhottle quadrant but i have problems binding the right axis. IIn the windows device manager i have turned on the virtual buttons option.
I copied a profile to PMDG. Once in the 737 i can move the throttle up and down and in game same happens until i activate the reverse thrust on the trustmaster quadrant, the PMDG throttles get stuck. Once i delete the binding in MSFS i cannot rebind the throttles as i can only bind buttons...Can you explain how you mapped engines 3 and 4 to the quadrant?
Thanks so much, I would never have figured this out by myself.
No problem, glad it helped 👍
great video thank you so much, i have a question did anyone find a way to make use of the eng 1 & 2 levers aswell as the autobreak or are those just dead on the pmdg 737 and 777? i cant find a way to do it, thank you for any advice!
I believe spad.next will help here. I’m planning another video on the topic soon
Thanks a lot for this video. I tested it for the PMDG 777/Msfs and it works. One Question. Did you also have a instruction for the engine start with the Thrustmaster Airbus TCA?
No, but that’ll be coming soon. Got a video planned with spad.next
@AirNOTT I tried doing the same as per your video for thr pmdg 777 but when my tca is at idle,the throttle in the pmdg777 is at around 25 percent throttle...any fixes please? Love the videos.❤
you can actually remove a little element out of the bottom of the throttles which can remove the detents
Yes that’s right, but I personally don’t find them to be annoying when flying Boeing and just push through them
@@AirNOTT that’s true, I’m interested to see how long I’ll have the due diligence to unscrew and replace the little thing at the bottom when switching aircraft types before I just push through them aswell 😅
Do you mind showing your binds for the Airbus add-on pack? Just got them and can't seem to get the spoilers to map correctly!
All default I believe.
Hello i have followed your tutorial regarding the set up of the TCA but what happens is the following.when i try to activate the reverse on engine 2 instead of reversing it goes full throttle.any chance to explain me what happened here?thanx in advance
I've found your video a lot different from others on UA-cam, specially thrust and reverse setup and sensibility. In any case i'm testing it now. I'd like too a way to use the Eng on/off of Tca Throttle quadrant for cutoff option ( when reaching 25%), do you believe possible? Many and many thanks
I haven’t tried it, though I wonder if spad.next could help. I’ll make a video on it if it’s turns out well
Great, however it did not work on Boeing 737 MAX, maybe it does for the PMDG, but I would not buy PMDG to trail my Airbus quadrant. i was about to buy the 737 PMDG pack...
Thanks anyway for the great video.
I have the bigger airbus throttle pack with the speedbrake and flaps etc however the auto brakes and as you may have noticed engine starters dont work on the boeing and if it does I haven't found a way to do it
I keep meaning to try spad.next to see if that can hook in with it
Hi there, I am using Airbus throttles for PMDG 738 which is set up following your settings. I noticed when thrust reverse goes to idle thrust my auto brakes disarms. Would greatly appreciate your help on this. Thank you!
you are legend!!! ..great explanation, but can you tell me how the hell did you figure out that is button 12 and 16 :)?
I forget where I saw it, a forum post months ago I think. Didn’t seem like many knew so figured I’d share
@AirNOTT have you ever run across where the 737 throttles with TCA Airbus become unresponsive? Like when you hit reverse it doesn't do anything no movement from the throttles in-game?
Thank you! Helped me alot! :)
Are you a PC or Xbox user? Thruatmaster told me that the Boeing yoke wasn’t compatible with the airbus quadrant. I too want to combine the two.
Pc. Not sure how it would work on Xbox. I would take Thrustmaster word for it
Works great on the tfdi md11!
Mine on the sensivity part it doesn't go smooth, in 3/4 of the thrust it just gives a jump to toga.
so when i uncheck my reverse axis to show like yours everything works backwards, but when i check my reverse axis then my reverse does not work?
Thank you so much, super effective and well explained! Saludos from Spain!
You’re welcome!
Hello! Thank you for your video. I did everything like you said but reverse thrust doesn't work... Idk why... Can you help me please?
Can you help me setup the Airbus TCA Throttle Quadrant for the A340? I'm using your settings for the 4 engines (and only dual throttles on the thrustmaster) but I cannot for the life of me get them in cl, flex togo etc. i'm going crazy here.
Can confirm this works! great videos!
Thanks! Glad it worked out for you
How to set reverse on the throttle axis?
Thanks for this! I really needed it!
You’re welcome!
THE BEST VIDEO ... I LOVE YOUUUUUUUUUUUUUUUUUU MAN
🫡
Thx for sharing ! I thought you've done one of these videos in the past..anyway, must check your approach :)
I spoke about it briefly in my setup tour, but never went into the details of setting up the finer details. Thanks for watching!
My Axis is not in sync with the plane. When the TCA is in idle the throttle in the plane is still at about 25%
What am i missing? Thanks!
Same here..did u solve this issue?
same, can u help me guys?
Very well explained. Thanks for your efforts.
Cheers Andy!
Brilliantly good explanation. Thx
Thanks, Robert!
For some reason my throttle randomly increases speed to full throttle when taxiing
Why i've got the problem that my boeing is only going into "idle" thrust reverse? I think i've done everything like you explained in the video :(
Same here, got the same problem
Why does my rudder not work when twisting the sidestick, it has no movement for rudder
Very efficient. Functional. Tanks
for the 777-300ER: It works fine until i actually go into Reverse, then i seem to stay stuck in reverse and cannot get out of it anymore
Weird, I’ve heard people say the same but it’s not an issue I can replicate
im having the same issue. I'm hoping theres a fix
I did all you said in the video and it works but I have an issue where one of the levers on the 737 randomly rolls back without me touching it especially when setting toga thrust dont know whats happening anyone can help?
this worked but my throttle doesnt get to 100% it get to 70 % how do I fix it?
Thats very helpful, thank you.
Glad it was helpful!
Does the pmdg 737 still work properly if you have a side stick? (before anyone says just buy a yoke, I don’t have a lot of room and I don’t really want to buy one for 1 aircraft)
Yeah you can fly with a side stick, I did for many months before getting the yoke.
Thanks, great instruction video!
Hey man just a question will this mess up the settings for the Fenix if I switch back to the Fenix?
If you make a profile for the Fenix and a profile for the Boeing you should be able to switch between them without them conflicting
Everything else works fine but my throttles wont fo toga they get stuck at 89% thrust any known fix. I have copied your exact settings
Anyone else having the issue of the throttle decrease option not showing up? Help?
You don’t have it filtering only assigned inputs? (on the left hand side of the screen)
@@AirNOTT ohhhh… Thanks a ton!
@@CarterFlyz1 no problem, happy flying!
Nice Video, I almost got it working, however the reversers in the aircraft gets stuck (id say about 20 percent extended) when I enable reverse thrust on my physical throttle. I did bind Buttons 12 and 16 to Thottle 1/2 Decrease. The only way I can unstuck it is by manuelly resetting the thrust reverse levers inside the aircraft.
Did something similar happen to any of you and does anybody know how I can fix that problem?
Maybe there is a setting inside the aircraft that I missed?
I managed to work around this by mapping button 12 and 16 to Throttle cut, but only on Button Release (instead of Button Press).
@@Marco-vp1fy Thanks for your reply, but the Issue has actually fixed itself: It seems that the thrust reverse freeze only occurs on ground / when parking. I have flown about 3 approaches and it worked everytime without a problem.
Only my reverse works, not my throttle. Can someone help me.
Do you have the Fenix. Having issues with the calibration
I do indeed.
@@AirNOTT having issues with the detent on rev/idle. It seens to be same
wow, thank you so much. It works perfectly.
Glad it helped!
What if when I plug it in pc it says the Last USB device you connected malfunctioned and Windows does not recognise it? Please help
Try a different usb port? Make sure your drivers are up to date. Your unit could also be faulty I guess
@AirNOTT it was the unit thanks for help
massive thank you
Does this work with the yoke too ? For the 737 -800 cause recently got one
The Boeing yoke would work alongside airbus throttles without issue, if that’s what you mean?
Yea beacuse I do want the airbus thrustmaster soon @@AirNOTT
Do you know if flying the 737 with the airbus joystick would work instead of the yoke?
I used to fly 737 using the stick for several months before getting the yoke
@@AirNOTT So it works fine then?
Reverse thrusters not working when i assign button 12/16. any idea whats happening
Same. It was working before and suddenly it stopped working. Any fix @AirNOTT ?
No idea! Mine still works fine, sorry!
Good job !! Thank you too much !!
It all worked apart from once I put it in reverse, it's stuck there..? Any ideas mate? I can just tap F3 to take it out of reverse but can't figure out a way to fix it
same here any fix?
@@kingbarnab344 I did fix it but I’m not sure how, I have a feeling it’s because I tried it with nothing turned on on the aircraft because after that comment I did a flight and it all worked fine. Not sure how it would make a difference but it did
@@Brad_1511 thx will give it a try
omg thank you so much it works now@@Brad_1511
@@kingbarnab344 so? It works for you?
do you have any settings for the airbus tca joystick for the 737
I don’t thing I made any changes to the stick beyond the defaults. What are you struggling with?
when i try to use the the airbus sidestick whith the 737 the yoke won't move
also whe i try to put the revers trust to idle it won't go to idle and in won't go full revers and once i put it to reverse it won't go to idle
Do you have any ideas for Boeing throttle setup for airbus?
Afraid not, never had the Boeing throttle. Sorry!
reverse thrust does not work for me with those settings and sensitivity
And you did the button 12 / 16 thing?
@@AirNOTT yes
Does anyone know what the button 12 and 16 would be on xbox
no unfortunately I am also looking for that... did you find an answer??:) would be much appreciated
THANKS!
this is everything ty
Anyone else here had the issue that it selects reverse but then doesn't come back out of reverse when moving the throttle levers back to idle? Only way i can get it out of reverse is by moving the levers in the cockpit with my mouse!
SAME!
@@toastedtea I figured it out in the end, turns out you have to have engines running! I was trying to set it up with the engines off and it wouldn’t work. As soon as I fired engines up it all worked beautifully
Important: You MUST assign the "Throttle# Axis (0 to 100%)"" Axis, not the "Throttle# Axis as for the Airbus 😎
My maximum throttle is only 60% when my throttle is at max
doesnt work at all man, for me when i go back to idle the reverse move a notch and then get stuck. Same exact settings as yours
You’ve set the sensitivity curves too? Make sure you don’t have any other controls mapped to the throttles also
@@AirNOTT yeah set the curves and no others are mapped to the throttle
Doesnt work with 0-100 axis
thank you
You're welcome
Oh my god ive been looking for this I want to buy one but im just in deep doubt that it will work with boeing thank you so much i sir im subs
You’re welcome! Thanks for the sub 🙂
THANK U
You can disable the detents really easy
Having to flip over your throttle, and then have to screw it out and in everytime is a pain, especially when u can just push thru the detents.