Repairing a dead 18 volt NI-MH DeWalt Battery Pack - 763
Вставка
- Опубліковано 23 жов 2018
- I like messing with batteries,, and I like fixing stuff,, so trying to fix a broken battery,, is a win win :-)
My fix here is not optimal,, the old cells I had laying around,, was only 1,2ah,, where the DeWalt cells was 2,6ah.
I did a later video fixing these again : • DeWalt Ni-MH Rechargea...
[Affiliate Links]
China - Replacement cells : s.click.aliexpress.com/e/_AWh80D
Link - DeWalt "clones" 18v NIMH : amzn.to/2PQNJwC
Link - DeWalt DCA1820 NI-MH to Li-Ion Converter : amzn.to/3yfzGXZ
_______________________________________________________________________________________
/ myplayhouse
Even just 1$ a month, comes out to the same as Binge-watching like 400+ of me Videos every month.
My PlayHouse is a channel where i will show, what i am working on. I have this house, it is 168 Square Meters / 1808.3ft² and it is full, of half-finished projects.
I love working with heating, insulation, Servers, computers, Datacenter, green power, alternative energy, solar, wind and more. It all costs, but I'm trying to get the most out of my money, and my time. - Наука та технологія
Thank you, your disassembly helped me a lot. I hadn't thought of a hammer to the center. I love your chatter and relaxed attitude! You sound danish, or atleast Scandinavian. My parents are from denmark so it is enjoyable to listen to you.
I have 2 18V dewalt batteries to fix for my step father they're at 13 & 11V each. With your video i am confident in getting 1 working pack
Yes I am Danich,, I try to have fun while making videos,, sometimes it works :-)
I am sure that the mechanic will be thrilled with that fix. Great video.
Hi Chris Moore
Thank You very much! I am sure he will,, glad you liked the video :-)
Thank you for watching! :-)
Not certain about the points made but ,if anyone else wants to learn about reconditioning lead acid battery try Jons Mender Guide ( search on google ) ? Ive heard some incredible things about it and my m8 got excellent success with it.
.....I'm only at 9:51 but amazed at your patience. Anyone can gain knowledge and experience but gives me headache just thinking about attempting this. I have three 18v batteries, why I'm here, but they slide in the bottom of the drill instead of that plug in type. Just used one a week ago but last night it would barely turn. Found the double charger and wife had 2 batteries on it. Both were about like the one I had just tried. When inserted into charger the light stays red. Nothing happens. No charge starts. I will have to go get one to see what type it is but thanks for what you have shown here. Wife bought a package deal which has 4 or 5 tools that use same batteries so might be worth new battery but saw video quite a while ago showing how to "trick" the charger into charging. I hate that companies build in the design so it will not charge battery after volts or amps drop to certain point but are perfectly capable of being charged. Greed controls our world. Every aspect. Just how much money and profit is enough? Guess answer would be that to some people there is never enough. I hope their last thot is "where's my money?" The answer is but a breath, a heartbeat away. Great video. I wish you much success and hope this works which I am sure that it will.
Hi Accelerator Magazine
Thank You very much! I enjoy fixing things,, sometimes it pays off,, some times not as much :-/
I did another video on this if you haven't seen that : ua-cam.com/video/GiFgOKR1eGA/v-deo.html
Thank you for watching! :-)
The "Crimp Tool (Krimpzange)" is awesome 👍🏻, no chance to fall apart and the wire will never ever get loose again, costly but awesome like all good tools!
But it's a once in a lifetime buy, and you can inherit it further 😁👍🏻
Great episode, just in time to look later at my old accu!
Hi Che Guevara
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
@@MyPlayHouse Thank You!
And I will continue!
I had one of the cheap Crimping Tools before, and it was just annoying, it was always the same, you Crimp and then test with pulling at the cable, and I a lot of cases = it wasn't strong enough!
But then with the accurate and Quality Tool, = one Crimp, and you can hang at the cable and it's STRONG!
Won't miss it anymore, and it will hold my whole life!
👍🏻
Oh my god, thank you so much, man, I didn't find any video in Portuguese teaching repairing this battery, but I will try to repair it now with your video, I'm Brazilian, thank you very much.
So happy to hear that I was able to help.
Your video helped me figure out that inserting a couple non-conducting wooden craft (popsicle) sticks into the terminals and rapping against the other end would cause the battery pack to pop free of the housing quite easily. Thanks.
Hi Geoff Rundlett
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Great video. I am happy with once cell at half the capacity.
Well it is not a long thermae fix,, new battery is needed,,and Li-ion if posable.
Love your DIY vids, right down my alley!
A word of caution concerning DeWalt DCA1820 NI-MH to Li-Ion Converter they have components (transistor) that tend to burn out easily (if you use a large drillbit och your circular saw blade get stuck). If you buy them buy 5-6pcs to be safe!
Thanks for the info! I did not know that.
I didn't know you could test each individual battery with them all hooked together. I have the same battery pack to work on. thank you for the video
Hi wayne ploof
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Yes you can, a wet lead acid battery can be checked for a bad cell (plate to plate) that way too. Just make sure to clean the probes afterwards.
lol loved the high speed sanding, it just looked funny :-D
Hopefully it worked for him.
Yes the low capacity cell would limit the discharge, but the pack was ill anyway lol.
Hi zx8401ztv
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
FYI - I hate to be the guy that looks for mistakes. 3:22 you're counting the batteries.
1-2-3-4-5-6-7-8-9-10-11 and you skip to 13-14-15 to get to 16
Watching you work on this project make me think I can replace the batteries!
I'm going to give it a whirl. Thanks for putting this up.
:-) Thank You,, look through the comments,, you might be No. 12 pointing this out :-)
Good luck on your fix!
Good Job. at least you mechanic has a back up for his shop.👍 I will bet he will be so happy he will give you one of those little pine tree air fresheners to hang on your rear view mirror 😁😁
Hi reedrancho
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Great video Sir. Thank you.
Hi Mark Rey
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
YUR VOICE WARMS MY SOUL
Never got that reaction before :-) I 'will add it to my CV ad once,, "My voices wames peoples soul" :-)
Do watch more soul warming videos :-)
Very good I will fix some I have , maybe have at least 10 bad ones in a box now I know how . Thank you for sharing
You're knowledge.
Hi Dietmar Steinhilber
Thank You very much, great I could help! glad you liked the video :-)
Thank you for watching! :-)
When you want to solder fast oxidizing materials you will cover the soldering area with oil and clean it ( the oil is protecting from air and moisture)
Hi Orfescu Horatiu
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
hi everyone ,if anyone else is searching for how to recondition rechargeable batteries try Battery Recovery Tactics ( battery.RecoveryTactics.com ) ? Ive heard some great things about it and my work buddy got cool results with it.
Very good tutorial :) thank you
Hi Gadien Chapman
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Thanksfor the update and for
great job thank you sir
Hi adel ismail
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Great Video
Hi António Manuel Fidalgo
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Friend I have a Ryobi battery 12 V it It reads 13 V on my Multi meter but it won’t even turn over a drill could it be in sleep mode
That is weird,, is there a lock on the drill ? check the battery connections on the drill and battery :-/
The strips probably are not solid nickel. Most likely they are just nickel plated steel. After the plating is corroded or otherwise damaged, the soldering becomes difficult, if not totally impossible.
I would try some slight charging on each low reading cell, maybe 100 mA for 15 seconds and then immediately measure the resulting voltage. The shorted ones are basically lost, but cells that are just low may have a little lower capacity than others in the pack and became low voltage during the last, final attempt to use.
Hi Pellervo Kaskinen
Thank You very much! I did a follow up video on this : ua-cam.com/video/GiFgOKR1eGA/v-deo.html And somehow I had a lot less trouble sording on the strips in that video. Think the soldering iron was warmer in the new video.
Thank you for watching! :-)
hi everyone ,if anyone else is searching for how to recondition rechargeable batteries try Battery Recovery Tactics ( battery.RecoveryTactics.com ) ? Ive heard some great things about it and my work buddy got cool results with it.
Great Video! Forgive me for butting in, I am interested in your opinion. Have you heard about - Lammywalness Trendy Trade Guide (do a google search)? It is a smashing one off product for learning how to recondition batteries at home minus the headache. Ive heard some awesome things about it and my cooworker after a lifetime of fighting got cool success with it.
Nice job
Hi Dennis Fox
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Do the factory Dewalt batteries have any markings on them that would denote the Brand?
I've already rebuilt some battery packs using HF battery packs but they just never really had the "chooch" that the original batteries had.
now that its been a couple years i want to just buy SubC batteries in bulk packs and rebuild my battery packs as needed, but i don't want to buy a S brand again i want to buy the brand that Dewalt uses.
Thank you
There is a NI-MH to Li-ion converter so you can use LI-ion batteries,, I would go that route.
@@MyPlayHouse great idea. Will the charger work?
Dear Sir-You need to apply more heat, either by holding the soldering iron to the work or getting a higher wattage one-good cleaning practices though:)! The vintage electric soldering irons with the screw on copper tips work MUCH better, IMHO-John in Texas
Thank You,, I have found that it works a lot better if I turn the iron up to max.. so you are right.
cool, I ahve a couple of 18V dewalt packs from about 2005 that are going bad, I'll probably just combine them into one to avoid buying new packs for now. I can buy a new LiOH drill with two packs for not much more than those replacement clones.
Li-ion is the way to go,, they are so much better.
nice work and nice fluke multimeter 😉
Thanks 👍It has been doing me well for many years!
good video, and good fix. I have a hitachi drill 24v that not (one) battery charge and im go to fix it thanks.
Hi exeorojo 4x4 Off-Road Videos
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
@@MyPlayHouse yesterday I disassembly muy Hitachi bsh battery and with the test I found 2 cell that not charge. I buy a pack of 10 cell (units) for change. Thanks.
Love your videos! I am planing to get my first used server (HP DL360 G6) . If you have any advice let me know I would really appreciate it.
Hi technavneet
Thank You very much! well the dl380 G6 is a good server.
Thank you for watching! :-)
hey ,if anyone else wants to discover how to recondition batteries at home try Battery Recovery Tactics ( battery.RecoveryTactics.com ) ? Ive heard some extraordinary things about it and my brother in law got great results with it.
Love the videos. Will you be uploading the Fujitsu server video to youtube?
Hi Eric Yost
Thank You very much! Yes Next week..
Thank you for watching! :-)
interesting points ,if anyone else wants to discover reconditioning battery try Jons Mender Guide (just google it ) ? Ive heard some unbelievable things about it and my work buddy got cool results with it.
Good job
Hi Haeone H
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
That is how to do it, so that's excellent. Set a goal, deal with the drawbacks, overcome, obstacles negotiated, objectives realized/reduced, that's it !!! It's Miller time. Thank you, sir.
Hey viewers, not everyone sits around soldering 6 d/wk or replacing batteries for a living. There's some of us that hav to save lives everyday, some hav to take'em, it takes all kinds to make the world go around. Its so much easier to be nice to people, all u hav to do is remember what u were taught as a child: If you do not have anything nice to then shut the f**k up !!!
Well most of my comments are quite nices, it helps a lot that I am here and replay to my comments (and it is a lot of work)
But it is impossible to make everyone happy,,all the time. And sometimes someone complains, in not always the most diplomatic languages, that he/she (it is mostly He) is disappointed. That I did not solve their problem in 2 minutes, and they have to watch a long video.
Over all it's fine,, I have to moderate very little :-)
there is also a date code inside the battery on the cells because many people but inferior cells in and try to get it replaced under warranty
Hi richard none
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
wattage is the only difference then my original rechargeable 18V battery. one is 48 watts the replacement is 75 watts. is this a great problem
Hi Ernest Twinney
It great to use a battery with 75Watt instead of a 48W,, that means that the cells is (75w/18V = 4Ah) instead of (48/18V = 2.6Ah) better cells!
Thank you for watching! :-)
What about rebuilding with lithium ion batteries with the same volt requirements
Li-ion batteries need the BMS circuit board,, and as the drill draws a lot of amps,, when struggling on a job... Making this your self, is complicated, and the time spend, could have been spent better with your new LI-ion drill :-/
Where do get the new cells?
Hi Rickey Keeton
There is usually a few good cells in even a bad battery,, so if you have a really bad battery you can use it as a doner for another battery,, otherwise Ebay or aliexpress.com
Thank you for watching! :-)
My PlayHouse I checked Ebay and another place or two. Not sure I found the correct cells. Most were higher or lower rating.
May check again. May have been looking for the wrong kind.
Love ya video
Hi Chris Longbrake
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Nice video!!! New subscriber!!!!!
Hi PAPERGATORZ FEDDUCCA
Welcome aboard! :-) I make new videos every Tuesday and Friday. (14.00 CET , 8 am EST) and there might be an extra off subject video or LiveStream doing the weekend.
I read and reply to as many NEW comments as I can, I do not often get to reply, reply´s (UA-cam messed that up) Keep them short,, please. And if you do not hate something, remember to Like :-)
Thank you for watching! :-)
With your accent I thought you were saying devolved but yeah, it really was devolved wasn't it haha! I'm trying now buddy.
Well maybe I am saying it wrong,,, :-/
I\'m not sure but ,if anyone else wants to discover battery reconditioning business try t.co/YpdloYO92F ? Ive heard some pretty good things about it and my neighbor got great success with it.
Just fit five 18650 cells in that battery grip and charge it from now on with two crocodile clamps and a LiPo charger
Hi Horst Zimmermann
Thank You very much! Would be a nices upgrade..
Thank you for watching! :-)
A fine idea, but how do you make them fit?
It would be really interesting if you can update us on how many cycles your mechanic will get out of this. And if the lower capacity cell will be the issue next time.
Hi Vytautas Mendelis
Thank You very much! I spoke to him yesterday,, and this battery is for a saw,, that they do not use that often,, I will see what I can do.
Thank you for watching! :-)
Absolutly horrible solution... You reduced the capacity of the full b-pack....
Usually we take 2 battery pack with same age usage and make one from them. It is way better solution.
Nihm is anyway not a very good stuff. Lion batteries has much better caracteristics. No memory effect, no sudden voltage drop on load,etc...
Some really heavy duty tools worth to upgrade lion, but it is a big work.
I don't think Morten ever mentioned this was a good idea :). Me personally have upgraded a few tools to Li-ion with some good results. Have an old BOSH drill what used to be 14V Ni-cad , now it is using a string of 4 Li-ion 18650's and works better then new :) . Only thing I was unable to do is to find a BMS powerful enough to run the drill from it. Had to run it direct from battery and add a battery indicator as not to run them flat. Other stuff includes old flashlights, camping lights, emergency lights, hair trimmers, toy robots , etc. The possibilities are endless. I use BMS from ebay with a lithium battery chargers-adapters also from ebay . Not the best solution I know , but perfectly adequate for my needs.
Will we see more of the hp storage box soon
Hi Cameron Craig
Yes,, more comming friday.
Thank you for watching! :-)
When changing interconnected batteries you MUST change ALL of them. They all have to be the same, and should come out of the same box. Otherwise, they can overheat. Mister hypocrite here, once mixed 2 different brand AAA batteries in a flashlight. It worked fine. A couple of weeks later, it was warm to the touch, and needed to be discarded. If that were a TV remote control, back-up sump pump or other battery operated device, it could be a significant cost to replace, let alone a fire hazard.
Hi TheDinoblues
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Very well
Hi Alirio Gomez
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
If one cell went bad, how long till other cells go bad? Replace them all and be done with it.
Hi DrHarryT
It can be a bad cell, and that one is bringing down the rest.
Thank you for watching! :-)
can I replace NI-MH with Li Ion?
There are a converter available,,, But it is complicated to go from NI-MH to Li-Ion.
Will watch later, just waking up now to my coffee.
Hi T Komoski
Thank You very much! Yes,, everyone in Canada is B people,, you just do not know it,, we are A people and has been up for hours.
Thank you for watching! :-)
kan man købe nye celler og hver ?
I was searching for new cells on Ebay,, but ended up just getting 3. party batteries,, there is a converter for li-ion,, way better than these old batteries.
OF COURSE HE COUNTED 10,11-13,14
There was a 12,, just did not say it..
I wish they would make these so you can just swap in and out bad cells easy by a spade type connector.
This is used in equipment that vibrate,,, A LOT,, so very important that it does not fall apart.
i hope he's better at dealing with electricity than with counting
12 times better...
My one Ryobi battery is dead, I need you to repair it!
Send it to me,, address is under the about tab,, If I can't fix it Cindy,, I will send to a new one :-)
@@MyPlayHouse Thanks Morten, you are a star!
No explicas como abrir la caja receptora de Bateria....eso debe tener algún truco
HI JOSE LUIS PRIETO
My channel is English, and to make sure as many as possible, can also enjoy the comments, they are also English.
Please keep to English.
Thank you for watching! :-)
I am going to do it different and then report the results to you. First I will use some chemical to dissolve the glue. Then I will seek out the existing (bad batteries) in the current pack and remove it, and attempt to super charge the bad batteries individually using alligator clips and a 9 volt battery--unless-they will charge in a standard battery charger --I will use that method. My attempt is to find the reason the battery failed and restore all bad components prior to re constructing the battery. I will replace any bad batteries found in the pack if they will not take a charge. I suspect that there only a few bad batteries in each pack. Using a volt meter to test each battery in the pack first. I will get back to you once the project is completed.
Hi Bob bailey
Thank You very much! Best of luck! :-)
Thank you for watching! :-)
Is 12 an unlucky number for you? You skipped 12 when counting from 1 to 16 :-)
Hi Johnnie Hougaard Nielsen
Thank You very much! No not as fare as I know :-)
Thank you for watching! :-)
Yeah , I wondered if anyone else caught that he cant count, SURE would screw up your V n A calc's HUH,!??
How could you miss it, I was asleep and it woke me up
the Shunt diode rectifier prevent and protect reverse current polarity is fatal for nicd and nimh cells in series conection. and increase battery long life for power tools. all information in maxim integrated. reverse current battery polarity protection."sorry my english".
Hi viajero del tiempo
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Your iMax b6 charger can charge that battery pack
Hi Chuck12 -
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Nice brand
It was to expensive for me,, so I am collecting Ryobi,, now the prices seam to have come down,, but I have so man Ryobi tools now :-)
i just recently replaced a nicd battery with a lipo cell + protection board. it can be charged with the old charger and works with the drill. buuuuut i tried drilling metal with it and the controlling mosfet gave up, so there is only on or off now on that drill XD too many amps from the battery i guess
Hi fredlllll
Thank You very much! controller might be to small.
Thank you for watching! :-)
What happened to 12
Hi Richard Canfield
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
hey it did the temporary job hope it last long enough to buy a new one
Yes,, this battery technology is just dead.
@@MyPlayHouse lithium iron phosphate is better
yep counted 10 .11 13
Damn.. you caught that :-)
I also have the same issue with my battery
Hi Mafabi439 Darlington
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Thanks for also responding to my comment sir am very sure it’s going to work again basing on what u have directed to me
The bad thing is that in use the good cells will force a reverse polarity on the weak (low capacity) cell and that will kill the low capacity cell in very few cycles. Actually depends on how long the use is continued after the weak cell has reached zero volts. In principle that happens at point when 1.2 Ah has been consumed. On the other hand, during charging, the weak cell has to dissipate its share of the energy into heat after its 1.2 Ah has been stored. Ugly treatment either way!!
I will start to say that this battery technology is obsolete,, they was always flat when I needed them.
you made two mistake one is you mixed ni-mh with a ni-cd which is not a fatal error but you put in a much lower capacity cell ,and i am sure that cell will be overcharged and the battery wont last
Hi allmor77
Thank You very much! Yes,, it did not last,, and I did a new video where I had to fix that one again,, together with another one.
Thank you for watching! :-)
10, 11, 13, 14. Yes you counted wrong
Hi MrCervasio1
Thank You very much! Yarh,, something is missing here :-) glad you liked the video :-)
Thank you for watching! :-)
You counted wrong. You skipped the number 12. There are 15 cells not 16.
Hi E Zim
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
DeValt
Where ? DeWalt
I have 12 I need fix how much
Hi Sir Right
Thank You very much! But I do not do this services,, and shipping would kill any good deal,, unless you are in Denmark :-(
Thank you for watching! :-)
Dont forget to recycle the old batteries. Wonder how many people recycle there batteries.
Hi Philip Saunders
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
A bit late but I have yet to see a place where you can just drop them off without making an appointment with your local carting company including municipal. The day they make it easier I’ll do it all day long.
All the cells will drop to the lower voltage cells
I do not see how.
so i will keep my old batteries, and rebuild. with one being sacraficed
Hi Kevin Stacey
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
Hej med dig har du set der er komme nyt Firmware update Canon EOS 600D v103 kan se at du har lave en video med nr 02 men ikke med 03 fra kan se den jeg har funde er fra 2016 vol jeg lige sige !! vis du stade har kammer jeg likke osse inde med såden et kammenr !! m.v.h Paw
HI Paw Hvidberg
My channel is English, and to make sure as many as possible, can also enjoy the comments, they are also English.
Please keep to English.
My Canon EOS D600 was stolen many years ago :-/
Thank you for watching! :-)
@@MyPlayHouse kan kun skrive dansk da jeg er dansker og ikke enske"desver "
LOL U SAID 10 11 13 14 HAHA
Check the comments and see just how many comments I have gotten by skipping no. 12 :-)
@@MyPlayHouse lol i think yur hilarious
simple mth 1.2 X y = 16
Okay,, did I do my math wrong?
@@MyPlayHouse lol I'm surprised you responded to a dumbass commenter on this old a post I did enjoy video and ty for reply and this video
First! :D
╭━━━┳╮╱╱╱╱╱╱╱╭╮╱╱╱╱╱╱╱╱╭━━╮
┃╭━╮┃┃╱╱╱╱╱╱╭╯╰╮╱╱╱╱╱╱╱╰┫┣╯
┃┃╱╰┫╰━┳━┳┳━┻╮╭╋┳━━┳━╮╱╱┃┣╮╭┳━━┳━┳━━┳━━┳━━┳━╮
┃┃╱╭┫╭╮┃╭╋┫━━┫┃┣┫╭╮┃╭╮╮╱┃┃╰╯┃╭╮┃╭┫━━┫━━┫╭╮┃╭╮╮
┃╰━╯┃┃┃┃┃┃┣━━┃╰┫┃╭╮┃┃┃┃╭┫┣╮╭┫╭╮┃┃┣━━┣━━┃╰╯┃┃┃┃
╰━━━┻╯╰┻╯╰┻━━┻━┻┻╯╰┻╯╰╯╰━━┻╯╰╯╰┻╯╰━━┻━━┻━━┻╯╰╯
╭╮╭╮╭╮╱╱╱╱╱╱╭━━━╮
┃┃┃┃┃┃╱╱╱╱╱╱┃╭━╮┃
┃┃┃┃┃┣━━┳━━╮┃┃╱┃┣╮╭╮╭┳━━┳━━┳━━┳╮╭┳━━╮
┃╰╯╰╯┃╭╮┃━━┫┃╰━╯┃╰╯╰╯┃┃━┫━━┫╭╮┃╰╯┃┃━┫
╰╮╭╮╭┫╭╮┣━━┃┃╭━╮┣╮╭╮╭┫┃━╋━━┃╰╯┃┃┃┃┃━┫
╱╰╯╰╯╰╯╰┻━━╯╰╯╱╰╯╰╯╰╯╰━━┻━━┻━━┻┻┻┻━━╯
╱╱╱╱╱╱╱╱╭━━━╮╱╱╱╱╱╭╮
╱╱╱╱╱╱╱╱┃╭━━╯╱╱╱╱╭╯╰╮
╱╱╱╱╱╱╱╱┃╰━━┳┳━┳━┻╮╭╯
╭━━╮╭━━╮┃╭━━╋┫╭┫━━┫┃╱╭━━╮╭━━╮
╰━━╯╰━━╯┃┃╱╱┃┃┃┣━━┃╰╮╰━━╯╰━━╯
╱╱╱╱╱╱╱╱╰╯╱╱╰┻╯╰━━┻━╯
i was first in chat lol
Yes You was first in chat,,, well beside me,, who did not know if it was working at all.. :-)
yup was waiting and and thinking how it will behave
First?
Hi Flintlock1
Thank You very much! glad you liked the video :-)
Thank you for watching! :-)
I never see the point in messing about with batteries. Put in recycling and just buy a new one. They are so cheap compared to messing around. Also a bodged battery will just let you down at the worst possible moment. A false economy.
Hi mbaker335
Well I like fixing stuff,, sometimes I fix stuff just to throw it out,, as I do not realy need it. I am sure it makes as much sense as watching grown men chase a ball around on a field.
Thank you for watching! :-)
what a waste of time
Yes NI-MH is just a dead technology by now.
Learn how to count
ran out of fingers