Help! If you’re reading this, I’m trapped in a Chinese fortune cookie factory. But first, let me tell you about this amazing battery case you’ve found. It holds ten 18650 lithium-ion batteries. Before you solder the PCB, make sure each battery has the same voltage. This is crucial. Follow the steps in the video carefully. Great find, Gear Show. Now, please send help.
Sir, what is the amp value of 5S BMS used by you for this power tool.?. I too, have a drill make 'Tool Master' 18v having 15 Ni cd batteries which is dead now. Please guide me how many lithium batteries may I use to replace Ni cd batteries and also the matching BMS to run it.?. Thanks.
Please, post the link to BMS. Some bms don’t work with this hi current drills, the load made the bms enter in protection mode (aka short circuit protection)
Please specify the details on the BMS used in this project and also the charger details with the link for their availability especially in India. Thanks. It's type of project I was waiting since my Ni-cad based drilling machine is lying idle for the past 18 months. Also kindly highlight about the conversion of different voltage Ni-cad cells and the aspects involved in such conversion are to be looked into.
Dear MR Gear Show and to Everyone Tips: When using second-hand cells, Flux should be applied to the + and - Terminals of the cells so that the grinded old spot of the Nickel Strip does not Rust.
Here is the product link item.taobao.com/item.htm?_u=h201jihblm0a91&id=642380869343&spm=a1z09.2.0.0.74a22e8dQeTWP0
Thank you! Have been looking for the same thing for months now
Taobao is useless for most of the world
everything good until checked output voltage on p+ and p- only showing 3.6 v
How did you get past the create address pop-up window? None of the browsers I have tried will translate a pop-up window
Шикарный набор! Давно искал нечто подобное для старых шуриков.
good job. The nicd or nimh batteries were not bad, the problem was that there was no protection circuit.
Incredible nice & clean work, well done❤❤❤❤❤❤
Love these tools a lot, so thanks!
Glad you like them!
A like it this vidéo ❤ from algeria
Great work sir you are awesome engineer thanks for the sharing this video sir ❤❤😊
It's my pleasure
It's amazing he knows how to do all these things, yet uses a masonry drill bit into wood.
when testing it doesnt matter iv seen another tool builder run a masonry
bit into steel
Thank you very much.
بارك الله فيك اخي عمل رائع❤❤❤
Thank you 🙏
You can also paint your homemade Charger adapter black and yellow and make a second one too
Another great build, If you'd got an old Ni-cad charger you could have used that as a charger base??
Hello mister good job well done
Hey, thanks
What is the capacity of this battery? Can I use it to run the drill for a day?
No, it can’t. This drill take much current to run
Beautiful job
Thank you! 😊
What type of batteries did you use for this pack?
Help! If you’re reading this, I’m trapped in a Chinese fortune cookie factory. But first, let me tell you about this amazing battery case you’ve found. It holds ten 18650 lithium-ion batteries.
Before you solder the PCB, make sure each battery has the same voltage. This is crucial. Follow the steps in the video carefully.
Great find, Gear Show. Now, please send help.
yardıma gelen oldu mu dostum.
Sir, what is the amp value of 5S BMS used by you for this power tool.?. I too, have a drill make 'Tool Master' 18v having 15 Ni cd batteries which is dead now. Please guide me how many lithium batteries may I use to replace Ni cd batteries and also the matching BMS to run it.?. Thanks.
Gracias por compartir tus ideas, pero seria importante que coloques tus links donde realizar la compra del la tarjeta de carga
I pinned link in the comments section
Please, post the link to BMS.
Some bms don’t work with this hi current drills, the load made the bms enter in protection mode (aka short circuit protection)
You can find it in the comment section
Great idea but what is the source for the battery contacts???
Please tell me which store in China sells it?
you are great❤❤❤
Please specify the details on the BMS used in this project and also the charger details with the link for their availability especially in India. Thanks. It's type of project I was waiting since my Ni-cad based drilling machine is lying idle for the past 18 months. Also kindly highlight about the conversion of different voltage Ni-cad cells and the aspects involved in such conversion are to be looked into.
Por favor traga mais vídeos de restaracion de corded hammer Drill
👍👍👍👍👍👍👍👍👍👍👍👍👍
10/10🎉🎉
En dónde consigo todo el kid
oh my god video is comming ❤❤❤❤❤❤🙃🙃🙃😉😉😉😉😄😄😄
👍
😊
Başarılı 🤘😎
Link pembelian untuk wilayah Indonesia apakah ada
Wow
Какой высокооборотистый стал шуруповёрт.Ему любое дерево и железо станет по зубам(Ваш доброжелатель Андрей Потаповъ).
👍🇹🇭🇹🇭👍
Dear MR Gear Show and to Everyone Tips: When using second-hand cells, Flux should be applied to the + and - Terminals of the cells so that the grinded old spot of the Nickel Strip does not Rust.
Plis subtitel mister
как радио механик по образованию скажу, что паяешь ты ужасно =))
Thank you, I will learn it more
please send me one 😭
👍👍😎🍺🍩🛠️🗜️
Not new cells, kekw
Plis subtitel mister
Okay, next time