Watch Your Freeze Dryer 24/7 🤓Freeze Dryer Wi-fi Camera Setup Under $50
Вставка
- Опубліковано 5 лют 2022
- Howdy all! Do you ever feel like you are checking on your freeze dryer constantly? I have figured out a way to check on your freeze dryer 24/7 via a Wi-fi camera setup for under $50. The ReoLink E1 Pro camera can do all of the functions the more expensive cameras can, like infrared, night vision, panning up and down, left and right, recording, screenshots, timestamp, movement notifications etc......BUT....it does it for $49. I have been using this for the last few cycles of freeze drying and once you get used to this, you will never look back. Now you can check on your freeze dryer while you are at work, sitting in your recliner or before you get out of bed. One of the best features is being able to set up a phone notification when your freeze dryer screen changes. That means when your freeze dryer goes into the final dry or has completed, it sends a message to your phone with an alert. This also means that if for some reason, you have an error or problem during the cycle, it will send a notification for that as well. I also show my impromptu camera stand for the Reolink E1 Pro.
If you want to check out the ReoLink E1 Pro Wi-Fi Camera, go to: amzn.to/34smBjS
(I am not affiliated with Reolink in any way)
Any of the freeze dryer accessories you see in the video can be found at:
www.freezedryingsupplies.com
If you are thinking of buying freeze dryer, support the freeze drying community and purchase through us! It helps keep this UA-cam content coming!
affiliates.harvestright.com/4...
If you are interested in purchasing an AVID ARMOR USV32, (vacuum chamber sealer) check out their site through this link and enter the Coupon Code LIVELIFESIMPLE to get 10% off your purchase!
avidarmor.com/?aff=43
Join our new MEWE freeze drying group:
mewe.com/group/5faad29bc03314...
or Join the Facebook group:
/ retiredat40livelifesimple
👍❤for products i use and love!💯🎁
www.amazon.com/shop/retiredat40
#freezedryercamera #freezedryerwificamera #reolinke1pro - Навчання та стиль
Great ideal. Thanks for the help.
Just remember that with any of these security cameras, when you allow them to have access to your local area network, and also to the internet, you now have a fairly powerful computer (powerful enough to digitize and stream high def video) for which you have no knowledge or control of its software, and no way to implement any sort of firewall or "antivirus". This is not just a problem for unauthorized people intercepting your video and audio (generally nobody cares about that), but remember that because the device now has access to your entire network, it can potentially capture and "share" any traffic that happens on your network. You've basically given the device the "keys to the kingdom" and allowed it unfettered access to the internet.
Because millions of any one model of these devices are sold, they're a prime target for hackers. By "breaking" one of them, they have access to all of them. And that allows them to create a large army of zombie devices that they can use to implement DOS attacks, etc. They've also been used to implement distributed porn servers, etc. And worst of all, all of the traffic on your LAN is now potentially visible to a hacker or the servers that these units often use, which are typically in China.
Ideally, you should sequester these security cameras or security camera systems on a separate network (where your normal surfing, shopping, banking, etc. is NOT). You can also set up certain routers to implement a custom VPN so that you can still access the video remotely. But this takes a bit of work, and you lose some features.
Anyhow, just a heads up. Most people wouldn't think of running a PC without some antivirus and firewall setup. Yet they'll scan the QR code on an inexpensive gadget of unknown origin, and allow it full access to their network and the internet. One of the largest security breaches in history, compromising millions of credit cards and other personal data happened because the company allowed their HVAC contractor to connect their heating/cooling system to their main network to allow the contractor to remotely monitor, troubleshoot, and adjust it. These "internet of things" devices can be fun and handy, but they need to be treated as the potential security breaches that they are.
Sorry to take some of the fun and joy out of all of this. But it pays to be careful.
I love this idea ❤️❤️❤️❤️
Great idea with the camera set-up! I don't mind running up and down the stairs to check though. Great cardio workout 😅.
I've attached one of my Blink cameras to an old articulated copy holder arm, works well.
Great ideas with the cameras. I have not gotten my freeze drier yet, but an idea for mounting the camera bracket is to use strong magnets mounted to the underside of the piece of wood. I use this sort of setup for othe purposes.
I love the Reolink. I was one of the Kickstarter donors when these first were created. I have two and they work well over time.
Awesome!
Awesome!
I've always used one of my spare Arlo cameras, stacked up a couple of boxes and bam! Instant monitoring, provided I didn't loose internet connection.
Plus I have had to replace the drain valve with an industrial stainless ball valve like we use on the leach pads at the gold mine I work at. The factory one kept corroding
I actually started doing this a week ago so I could watch it while at work
@gdaddy, so you are perfectly fine running your FD while you're not at home? Pardon my ignorance, but unlike Brian, I am NOT retired, so I have to go to work. I'm most worried about leaving these machines running all day unattended. Thoughts? Thanks in advance for your reply.
I’ve used a WYZE cam for several months with my freeze dryer. For what it’s worth, the legibility looks the same and is still a bit difficult to see the upper left screen. Your example is in a light-filled room. When the lights go out, I’ve had issues and eventually purchased a small lamp. The camera did not do well, even in night mode, looking at a back lite screen.
I use Wyze cameras, too. One commenter on their site said that 4-1/2" to 17" is best for closeups.
Just got my freeze dryer today! Do I need to be aware when the FD is done? Is there something I need to immediately do? Or will it be ok to sit for a while?
Think of vibration so make sure it can't move, maybe putting a piece of wood like a hook on the back would help.
Yes, baby sitting
Not on subject but how many hours before a dismantle and clean on a basic vac pump? I have over 2000 hours on mine and it is having a harder time getting down to 500 mTorrs
I wish the freeze dryer was smart and there was an app to go with it. That way there would be no need to rig up a camera, just check the app.
This is a great option to meet in the middle. I wonder if it’s possible to plug a custom device into the USB port that wound broadcast the status to an app 🤔
As noted in my comment elsewhere, there's no need - the controller board has WiFi hardware already built in. If HR wanted to, it'd be brain-dead simple to patch the software to turn it on and ship out relevant data/listen for incoming commands. An app for your device (phone, tablet or desktop) could then let you monitor/control the machine exactly as if you were standing there in front of it looking at/tapping on the screen. (other than the obvious need to be physically present to load/unload a batch, open/close the door, or open/close the drain valve)
Put a WYZE camera on mine. I can even check it from work.
Wyze cameras are $15 and can be seen from the internet. I don’t think they have the alert detection though.
I’ve tried the WYZE also. As others have mentioned, the backlit HR panel blocks the camera picking up the screen contents. Could you share how close you have your camera mounted and any special settings that make it better? Thanks!
recommend to harvest right
I use a command strip just above the screen on an indoor eufy cam...works really well! I would attach a picture, but I can't see how..
You can post pictures to the Facebook or mewe groups
Im new at freeze drying but why would you get up in the middle of the night to deal with the freeze dryer. Why not just leave it till morning?
Can you freeze dry popped popcorn?
@Retiredat40 have you had any problems with the Demister filter. Mine seemed to have broken down and is adding a lot of water into the motor. The inside mesh seems to have dissolved. I would think it would be stainless. Do you know anywhere we can order new demister filters. I contacted Harvest Right and no contact back yet. Any ideas on a better demister and how often should we be changing it. I wish they had a load recommendation of when to change it. I washed it out and dried it but any mist turns to small metal particles put into the motor. Please do a video on what you have found out. I have done a few 100 loads and just my last oil change the oil was immediately filthy brown goo. I am so scared my Premier motor is now compromised. Can't get to 500 sucktion either now. Also can't seem to upgrade my software, I have used 4 different thumb drives but it won't update.
I have not had problems with mine. The company that made the gen 1 pumps is navak, not sure if they are the makers of the gen 2
The Alfred app is free, and it uses an old smartphone.
I just got my FD and had ordered this camera to keep watch since the FD is not in the house. I am having trouble getting to pick up anything on the screen. The backlight blocks everything out. Even at night since it has night vision I just get a white square screen. Is there setting I can change to correct this?
By the way, a tripod works great as the stand. It’s adjustable for height and is easily moved out of the way when you want to open the door.
Yes, you can adjust lots of different thing in the settings
LOL! I've had a camera on mine for months now.
I'm not able to add the picture of the stand my husband built for mine on here. So posted it in the fb group.
I posted a picture of the stand my husband built in the fb group.
Great, thanks!
how is there no bluetooth setup!? theyve had bluetooth smokers for many years now
I think the blurry issue is simply focal distance, move it out further and it should clear up. Should be able to put it on some sort of swing arm so you can swing it out of the way when not used as well.
It’s too bad that Harvest Right doesn’t put that automatically in their machines. Ahh maybe in future machines
Im not trying to be a smarty pants but given that the FD keeps everything cold until you are ready to deal with the completed product why would you be woken up ? or need a camera?
You really helped me decide to get. a HRFD .. but mine came with nothing extra.. no pillow, no bags , no oil. The gentleman I bought mine through says, they don’t send any extras anymore.. is that accurate information?
They stopped sending pillows awhile back
A WYZE cam V3 is cheaper and even has a magnetic base that can stick to the casing...
Pardon my ignorance, but unlike Brian, I am NOT retired, so I have to go to work. I'm most worried about leaving these machines (FD & the vacuum pump) running all day unattended. Thoughts? Thanks in advance for your reply.
The freeze dryer will stay in a holding pattern if it finishes unattended. It will keep the food fine for awhile, but I would probably ad some time back onto it when you have time to watch it.
HR needs to either allow us to increase the font size of of the smaller information on the screen or let us dim the back light of it. Anyone know if updated firmware gives that option?
I have a Wyzecam v3 that I track my FD progress. Backlight is too bright.
Brightness control should have been an option for sure. I have read forums talking about a shading film much like window tinting being used to dim display before
My biggest gripe is why is there transparent door on the unit if you are covering it with the pillow? If you're not going to get to see what's going on inside then put in a real door with insulation.
The newer models don't require the pillow anymore. So you can see the products. But some people want to use the pillow anyway as they think it's more efficient with it.
Someone needs to figure out how to add Wi-Fi with an app to these things!
Put a tint on your screen.
Have you ever had a hissing noice come from your premier pump thank you
Mine has always sounded the same. I have not heard of a hissing noise
That sounds like a compression leak, might want to get a professional to take a look before it has a more serious failure that potentially would cause damage to the vacuum pump.
Shouldn't be needed - At least in the late 2021/early 2022 4-tray version I've been inside, there's WiFi hardware built directly into the controller board. All that's needed is for HR to release a software patch that actually turns it on and sends the relevant info. It would be absolutely trivial to, in effect, put the display/controls on your phone/tablet/desktop via an App so that you can do literally everything other than physically open/close the door, insert/remove trays, or twist the drain valve. (I STRONGLY suspect that the "pharmacy" or "lab" version is already able to do this)
I expect Bluetooth and internet capability is already under development but it’s not a reason for me to buy a new unit. Already have too many smart devices in the house that can be hacked. If they had a silent pump … that would be an incentive to upgrade.
I have had my HR since September 2021 and noticed when my HR drier is running, I see a Wi-Fi connection available on my network. I can connect to it but that's all, with no software to access the controller itself it's just a connection available. I just figured one it might just be for factory use or there would be a future software program available in the future. Not sure if anyone has noticed this it may be only the newest models?
Stay Safe & Good Luck
Curious what the MAC address is on the connection you see. I've got a lot of devices on my wifi that I need to name, so I'm not sure if my HR is showing on my network. Just got it 2 weeks ago.
@@lonbeatty Hi Lon, It is a Intel manufactured wireless adapter with MAC address starting with AC:72:89. If you see an SSID starting with ESP_xxxxxx on your network that is it. Not sure if HR will provide wireless access in the future or if it's only just for their use? Thanks
@@tincankiller6454 awesome, thank you! will check mine when I get home. appreciate it.
I have read on another video comments that HR does diagnostic trouble shooting, perhaps this is the purpose for the wifi connectivity.
@@GH0ST369 Hi Ghost this is my thoughts as well. Since they already have the Wi-Fi adapter installed it would not be too much more trouble to set up an app to use it as a remote monitor.
Thanks
I'm a little shocked to find out that the HRFD did not come with bluetooth and an app.
Set a camera up as soon as we put our FD in the basement. Don't want or need blue tooth