I‘m a retired oral surgeon and (thank god) I will never have to do that, but ........ this was a morning Zen session! And for that, even though I normally hate music in the background of videos, this one was helping with the Zen feeling. I forgot to eat my muesli! It was a pleasure watching you, you would have made a good surgeon too. Thanks for sharing, colleague!
I used to work in a Subaru dealership and was always fascinated when watching the mechanics putting these and the 6 cyl engines back together. These engines are for the most part, long living and dependable.
Wonderful video! I`ve spent 40 years teaching automotive apprentices, and for me its a real pleasure watching a skilled craftsman work. Nice job on the broken studs.
Watching the meticulous attention to detail and the quality of the re-build, this is one man I would trust with my engine re-build if I lived a little closer (I'm in New Zealand). Top quality video; very impressed
The sound of the piston head sliding into the guide at 6:59 was too sexy... This was so friggin satisfying to watch! Thank you so much for making this video.
That's the only reason I like it. To see what those who love these cars have to deal with. Lots of O rings and small fasteners. Too few head studs too far away from the cylinders. A complicated engine with a million parts. Or so it seems.
Coming close to one of my favourite channels! Lots of informative action, good tunes and an impressively clean/organised workshop 👌🏼 Thank you, keep up the good work 🤙🏼
Beautiful seeing a real craftsman take pride in his excellent work. I love how he made it look so simple to align the connecting rods with the pistons to set the wrist pins
This video is excellent. I now have a full understanding of why there's always a puddle of oil in my driveway every time my friend parks their Subaru at my house.
Tools, equipment and skill. Skill being a very major factor. I learned that the hard way when i decided to replace my rear wheel bearings on my own. I know a guy with a proper shop that lets me work there on my car, so tools and equipment were there. Took me friggin 8 hours to replace one! Didn't have the time or nerves to start with the second. Had to ask another guy with a shop if he could do it, cause the other went on vacation. Came back after about 1.5h to check up on progress and caught him putting my wheel back on.
thanks for this video! it was a great help, its been 3weeks that i'm suffering from insomia, then i watched the disassembling and reassembling of the engine, I fell asleep at the middle.. thanks alot!
Curto muito seus videos aqui no Rio de janeiro, Brasil. Um detalhe que gostaria de ver era o fechamento do motor parcial detalhando o torque de cada parafuso.
They look so awesome when they are fresh (any motor). Nice vid. Good thing you didn't spot that O-ring on the table as you taped it up... Naa! just kidding! Great work!
Warms my heart to see engine assembly lube applied with a paintbrush. Are you wearing video recording glasses? Great sound! Music unnecessary, those cracks and clicks sound awesome edited back to back.
Pretty sure the camera is on his chest in the beginning and when he mounts the 3rd and 4th piston he has moved it to his forehead. You can see when he uses the flashlight to check if the lock is in place the POV is either too low or too high, to properly see it.
great to watch i have owned three Subaru outbacks starting with the outback H-4 Six Cylinder then the 2.4 Outback and finally the Car I drive know is the 2011 outback diesel Boxer turbo this is the best car I have owned out of the three I wish I had of bought the diesel boxer earlier thanks for the enjoyable videos very professional
Another great video. Have you ever dropped one of the gudgeon pin circlips inside the engine when trying to fit them. I guess this is one of the hazards of a boxer engine ?
Merci, très instructive. J'ai mieux compris la partie assemblage embiellages vilebrequin, je me demandais comment on faisait pour ce type de moteur (idem sur Honda Goldwing)
you can overhaul my 2.5cc boxer anytime , mind blowing Japanese engineering iv'e had 6 years trouble free motoring with minimum work just kept on top of things, I love my scobby
As everybody stated, nice, clean, some tips during the video would be appreciated, like the kind of red grease you put while assembling the pistons and crankshaft, or the sealant you are using as gasket , My Jeep 4.7 is beeing rebuilt this week, so ypue video is very educating. One more how do you get to have the block and heads so clean like New??
Very nice re-build. Well done. I very much enjoyed the two videos, especially some of your tricks and techniques in Part 1 to remove seized parts. Questions: How long have you been rebuilding Boxers? How many hours did this project take, from tear-down, parts cleaning/restoration, to re-build? Thank you. I subscribed.
I‘m a retired oral surgeon and (thank god) I will never have to do that, but ........ this was a morning Zen session! And for that, even though I normally hate music in the background of videos, this one was helping with the Zen feeling. I forgot to eat my muesli! It was a pleasure watching you, you would have made a good surgeon too. Thanks for sharing, colleague!
I used to work in a Subaru dealership and was always fascinated when watching the mechanics putting these and the 6 cyl engines back together. These engines are for the most part, long living and dependable.
I love when there is no talking, just getting right down to business. Great video series.
Wonderful video! I`ve spent 40 years teaching automotive apprentices, and for me its a real pleasure watching a skilled craftsman work. Nice job on the broken studs.
LOVED this!!!!!!! You can tell you're German - everything is clean, tidy and done precisely - BIG thumbs up!!
and you dont speak English. Plus the German Shepherd dog gives it away.
jo300hn badger dog *
Very good video. The best: no jingle, no backpipe.
Its nice to see someone use a torque wrench properly. Nice work, clean, organize. Well done.
Painting happy little bearings.
Bob Ross is a Boss
Watching the meticulous attention to detail and the quality of the re-build, this is one man I would trust with my engine re-build if I lived a little closer (I'm in New Zealand). Top quality video; very impressed
Never subscribed to a channel as fast as this. Methodical, flat 4 and relaxing? Yes yes yes!
The sound of the piston head sliding into the guide at 6:59 was too sexy... This was so friggin satisfying to watch! Thank you so much for making this video.
I don't even have a subaru and I'm in love with these silent videos
That's the only reason I like it. To see what those who love these cars have to deal with. Lots of O rings and small fasteners. Too few head studs too far away from the cylinders. A complicated engine with a million parts. Or so it seems.
The developers of Car Mechanic Simulator have really knocked it out of the park this time.
super excellent......organised, skilled, clean...exact tools...big respect from Mauritius
How clean this guys shop is amazes me!!!
Coming close to one of my favourite channels! Lots of informative action, good tunes and an impressively clean/organised workshop 👌🏼 Thank you, keep up the good work 🤙🏼
Cool! Never seen a boxer taken apart before and assembled before.
Вот настоящий мастер своего дела какая КРАСОТА!
I enjoy watching a craftsman at work
Наверное не один я залипаю от данного ролика. Молодец 👍
Beautiful seeing a real craftsman take pride in his excellent work. I love how he made it look so simple to align the connecting rods with the pistons to set the wrist pins
This video is excellent. I now have a full understanding of why there's always a puddle of oil in my driveway every time my friend parks their Subaru at my house.
Awesome and you made it look easy if you got the right tools and equipment. I love the wrapping and boxer tape.
Tools, equipment and skill. Skill being a very major factor.
I learned that the hard way when i decided to replace my rear wheel bearings on my own. I know a guy with a proper shop that lets me work there on my car, so tools and equipment were there. Took me friggin 8 hours to replace one! Didn't have the time or nerves to start with the second. Had to ask another guy with a shop if he could do it, cause the other went on vacation. Came back after about 1.5h to check up on progress and caught him putting my wheel back on.
I am a young mechanic. I am keen on motors, and now I know what level of service I want to reach
Everything is so clean. i love the detail put into it
Seu trabalho na oficina é primoroso, mas a participação do seu cachorro é melhor ainda, parabéns!
I'm from Curitiba, Paraná, Brasil!
That's the cleanest shop I've ever seen. Great vid!
Awesome . Absolutely loved the attention to all the little details, great video, liked and subbed 👍🏻
Loved watching your work. I watched both videos all the way through, very interesting. Thank you.
thanks for this video! it was a great help, its been 3weeks that i'm suffering from insomia, then i watched the disassembling and reassembling of the engine, I fell asleep at the middle.. thanks alot!
That was nice !
From a Aussie 2012 subaru owner
AMAZING JOB! SUPER CLEAN ENGINE AFTER DISAASEMBLY. BETTER THAN ASSEMBLING NEW ENGINES FOR MERC. WELL ORGANIZED. CLEAN SHOP ! I feel envious....
I can watch this all day long 👌
That is right speed of video, thank you!
Love your channel love you speaking more English thank you from Australia
1:50 finally someone who is doing silikon job right
Love how everything is so clean ! Love the videos bro keep up the great builds 😍
No even a Subaru guy, but this video was really relaxing to watch, nice job!
I love videos like this! thanks for posting! Great content as always!!
I particularly enjoyed the yazz flute
Love your content ! Keep up the good work ! Greatings from Belgium
I discovered you channel today, and suscribed of course. The quality is great and your skills are amazing, congrats! Cheers from Buenos Aires
how can 104 viewers give this a thumbs down? he has the knowledge and a beautiful shop. love the soda blaster with the wiper.
Man you Germans got some badass tools.
Great video. The problems with the old screws well resolved. Good job, better impossible.
Total pleasure to watch a true professional at work! New subscriber here!
Curto muito seus videos aqui no Rio de janeiro, Brasil. Um detalhe que gostaria de ver era o fechamento do motor parcial detalhando o torque de cada parafuso.
Amazing restoration!
much prefer a camera that does not move. I understand you can not please everyone... great vids.
Awesome video, almost hypnotic watching the details you put into your work. Subscribed!
Love the videos. Watching from Spain
Why is this so relaxing? I wish I knew how to do all this stuff.
Soo nice, this vid is like therapy 👍
That's a nice damn tool box love the green
I wish they did this kind of quality craftmanship in America.
I enjoy see your work......greeting from Argentina.....!
They look so awesome when they are fresh (any motor). Nice vid. Good thing you didn't spot that O-ring on the table as you taped it up... Naa! just kidding! Great work!
Great clean job mate!
True workmanship
Your a BMF for boxer engines thanks again.
World class. Would be awesome if you had this video super in depth with detailed instruction and teaching but excellent video either way
Great Video ! The same rods that are going in my build !
Love this video, you are one systematic mechanic!!
Warms my heart to see engine assembly lube applied with a paintbrush. Are you wearing video recording glasses? Great sound! Music unnecessary, those cracks and clicks sound awesome edited back to back.
Pretty sure the camera is on his chest in the beginning and when he mounts the 3rd and 4th piston he has moved it to his forehead. You can see when he uses the flashlight to check if the lock is in place the POV is either too low or too high, to properly see it.
Very gently working, Great!!!
Amazing video, greetings from Brazil
Mann dass ist soo entspannend da zuzugucken, Schaade dass ich nicht auch so ne Arbeit habe.
Like your four legged shop helper. 🐶❤️🐶❤️
great to watch i have owned three Subaru outbacks starting with the outback H-4 Six Cylinder then the 2.4 Outback and finally the Car I drive know is the 2011 outback diesel Boxer turbo this is the best car I have owned out of the three I wish I had of bought the diesel boxer earlier
thanks for the enjoyable videos very professional
Le meilleur video que j'ai jamais vu!!!!!!!!Fantastique. The best video i have ever seen!!!!fantastisch.
the grease i use :
link : www.subi-performance.com/product-page/redline-motoren-montagepaste
Another great video. Have you ever dropped one of the gudgeon pin circlips inside the engine when trying to fit them. I guess this is one of the hazards of a boxer engine ?
Lovin the cleanliness...keep up the good work
Merci, très instructive. J'ai mieux compris la partie assemblage embiellages vilebrequin, je me demandais comment on faisait pour ce type de moteur (idem sur Honda Goldwing)
Saran Wrapped to keep in that Boxer freshness.
Oh man, love everything about this channel. Instant sub! Keep doing what you’re doing bro! Videos with no taking and just wrenching. Bliss! Peace bro!
Flat 4s are such cute little engines, love em! ^_^
素晴らしい！SUBARASHII!
There's definitely an art to getting those gudgeon pins back in :)
you can overhaul my 2.5cc boxer anytime , mind blowing Japanese engineering iv'e had 6 years trouble free motoring with minimum work just kept on top of things, I love my scobby
Good job man , that was a lot of work. great video.
You are an artist! I seen from México!
This is a man who has obviously attended a great many rodeos.
Es ist so entspannend dir bei der arbeit zuzuschauen und zu lernen 👍👍👍👍👍
As everybody stated, nice, clean, some tips during the video would be appreciated, like the kind of red grease you put while assembling the pistons and crankshaft, or the sealant you are using as gasket , My Jeep 4.7 is beeing rebuilt this week, so ypue video is very educating.
One more how do you get to have the block and heads so clean like New??
You have a beautiful shop. I wish I had one just like that.
Extra points for having your dog in the video.
Watched this,bought myself a socket set from halfords,now I've got a pile of bits,.he made it look so easy...😳🇬🇧
Sei il TOP DEL TOP 👍👍👍👍👍👍👍👍👍
Wow. You deserve more than 13K subscribers.
Not a subi fan but this is like meditating
How can anyone not like Subaru?
That is the goofiest looking hammer ever.
What? The one specifically designed to hit pistons into a block?
Snap on ! baby
Hi, very impressed with workshop and build skills...... is that REDLINE rebuild lube ??
Very nice re-build. Well done. I very much enjoyed the two videos, especially some of your tricks and techniques in Part 1 to remove seized parts.
Questions: How long have you been rebuilding Boxers? How many hours did this project take, from tear-down, parts cleaning/restoration, to re-build?
Thank you. I subscribed.
Love the first person. Keep it going.
I enjoyed that alot. what did you put on the head stud threads before you put on the head nuts? anti-seize?
amazing skills great video 💪🏻 STI
Amazing work as usual. Thank you.
Just as good as the last time I watched the "Mistro".
Respect Mister !!! You can be prout of you !!