How I Turned A Shed Into My 3D Printing Manufactorum
Вставка
- Опубліковано 6 лют 2024
- I almost quit UA-cam and 3d printing altogether getting this shed manufactorum up and running, However It's one of the best things I've done and with a few extra items I'm able to 3d print in the winter cold!!
This video hasn't been sponsored but some items shown have been sent to me free by companies.
Links - (amazon ones are affiliate)
Plasta cabinet www.ikea.com/gb/en/p/platsa-f...
500w heater - amzn.to/49tfjrZ
Thermometer - amzn.to/42uMUQa
Temperature controlled plug - amzn.to/3SZBm4x
Radiator foil - amzn.to/3UAPguT
Heating enclosure article 4dfiltration.com/resources/he...
Join this channel to get access to perks:
/ @battlebrothersam
If you want to support the channel further please pledge to my patreon.
/ battlebrothersam
Amazon Affiliate Links to stuff i use(As an Amazon Associate I earn from qualifying purchases you do after following this link - at no extra cost to you):
Printers / Wash Cure
Phrozen Sonic Mighty 8k - amzn.to/3D2VY2P
Phrozen Wash And Cure Station - amzn.to/44ycDHd
Phrozen Aqua Grey 8k Resin - amzn.to/3rejC9T
Sunlu ABS Like Resin - amzn.to/3pLy3BQ
Airbrush Kit (The kit I use)
Fengda Kit: amzn.to/3Tdsar5
Follow me on Twitch - / battlebrothersamyt
This video was inspired from channels like Midwinter Minis, Goobertown Hobbies, WintersSeo, Say Hi Paul, Squidmar Miniatures, Miniac Painting, Black Magic Craft, Real Terrain Hobbies and Geek gaming scenics.
Take away lesson: Sam needs to learn how to use a measuring tape.
My shed setup: Heavy-duty office table (£15 secondhand), random old wooden cabinet (£5) with the top screws removed so I can lift it off. A couple of pieces of insulation board bought on Facebook (£10).
I would recommend using a desk that has a very rigid frame to reduce the risk of wobble during printing.
I wish you had shown us an 'overall' view of the set up in the shed, a shot from a few feet away with the door open. Just so we could get an idea of the layout. Maybe you can show it in the future. I live in a cold State in the US and had a 1 1/2 car garage and wanted to work ( model making and painting ) in there during the Winter. I couldn't afford to heat the whole garage up, so I built a 'room within a room'. Simply made a 8ft by 8ft by 8ft room with 2 by 4's and drywall, with a door. A small electric heater and lights was all it needed.
Shed time is good time.
My wife banished my Mars 3 to the shed, it gives me hope that one day I maybe able to convince her to insulate and warm the shed so I can make more minis!
I know the feeling all too well brother 😅 depending on where you live the temps should be approaching a reasonable range for printing and if you don't want to insulate the whole thing you can make a enclosure like I have for machines and just insulate that! The only thing is just getting power to the shed but after that it should be grand
@@battlebrothersam what are the prospects of the machines long term? When you're not using them the extreme variations of temperature on circuitry and electronics can't be good?
You know what, I'm not 100% sure! I never thought about that but you bring up a good point that is far beyond my knowledge
What an awesome printer setup! that Phrozen Mega 8K is crazy big.
Waiting for the video where the police come round with thermal imaging, to see what you have been growing in the shed :) In all seriousness the shed looks awesome and very inspiring, I want to do something similar in the spring.
Nothing to see here officer!
A very timely video as I am in the process of shopping for a shed to make my Manufactorum to get my printers out of my home office. I'll be sure to triple check my measurements.
The shed looks great, and I think for a pre-built it was worth it. I mean, you have to factor in materials, tools, expertise, etc, and if you don't already have those, it would be more.
I thought about doing something like this in my backyard. Then I thought about how much easier it would be for thieves to break into a shed vs my home.. So I changed my mind. Nice set up nonetheless 💯
Looks awesome, that would be broken into where I live 😢.
Nice setup for the printer
I put my resin printers in a broken bench fridge. Kid safe, vents outside, easy to use, no smell. It's great!
Sam you know IKEA sell tape measures to right. Might need a new one.
Side note my wife is hinting at a shed for my printer. 😢
I am currently in the process of turning my storage shed into a printer cave, the main reason being the toxic fumes from the resin/epoxy. Thsi video is a good one and I would most likely have gone with a premade shed like you did for my backyard instead of sacrificing a valuable storage shed instead.
I'm planning on setting up my resin printer for the first time in the shed this weekend as i've been holding out all winter and this was incredibly useful. A trip to Ikea and B&Q is in order!
There are cheaper options than buying new. Why buy a shiny new cabinet that is going to be destroyed by resin by day two?
I bought my desk and cabinet secondhand for a fraction of the price.
Would love to see some old world content! Let's see a bretonnian army printed with movement trays!
lol, I guess that's why they say, "Measure once, cut 47 times" lol
I think spending a few minutes cutting 4 bits of wood to raise the table would have been the easier lol.
Great video. The advantage of an outdoor set-up is you can fling open the door to get rid of all the fumes 🙂I've been using Water-Washable resins, but my hollow prints keep splitting. What regular resin would you recommend for detailed robust prints?
That's exactly what I do when I open the wash station!! The fumes of ipa is so strong at times, I like using phrozen 8k aqua grey but it's brittle, sunlu abs like is quite strong
Thanks for the advice Sam. I've ordered both those resins. I'm just waiting for the weather to improve, and I will be back printing! 🙂@@battlebrothersam
Manta time
I'm just going to buy minis on eBay this is way too much hassle
HELLO, from Russia