Hey Gary Ferraro I was just needing to ask you a couple of questions I am by no means a transmission tech, I have a 2008 hummer h3 with the 5.3l v8 with the awd 4l60e trans and at about 120,000 it started off as just not wanting to shift out of first into second but would happed Rarely would pull over put it in park then it would work fine then it started getting more frequent so we parked it. So I finally wanted to get it back on the road so I scanned it and got just a po700 I think, just a generic code so I thought I was just shift solenoid or something along the lines after changing both shift solenoids checked the valves and spring when I did the solenoids fluid filter the speed sensor and connector on the transfer case which I think is the output speed sensor also changed the tcm these are the current codes I would really appreciate any help that you would recommend if not I will be replacing the trans completely po562 system voltage low (had too jump off car) po711 trans fluid temp sensor performance po722 output speed sensor circuit low voltage po723 output speed sensor circuit intermittent po741 torque converter clutch system stuck off po742 torque converter clutch system stuck on po751 1-2 shift solenoid valve performance no first or fourth gear po752 1-2 shift solenoid valve performance no first or third gear po756 2-3 shift solenoid valve performance no first or second gear I have not had time nor a power probe to check grounds of shorts or continuity on the wiring I’m sorry for such a long comment just need help thanks so much
Can you help i have a 2006 honda transmission with 57000 miles on it and doesn't past rpm 3 tp 4 and only goes 35mph and had flashing d but fixed it now still does the same i replaced transmission shift control solenoid
Hey Gary Ferraro I was just needing to ask you a couple of questions I am by no means a transmission tech, I have a 2008 hummer h3 with the 5.3l v8 with the awd 4l60e trans and at about 120,000 it started off as just not wanting to shift out of first into second but would happed Rarely would pull over put it in park then it would work fine then it started getting more frequent so we parked it. So I finally wanted to get it back on the road so I scanned it and got just a po700 I think, just a generic code so I thought I was just shift solenoid or something along the lines after changing both shift solenoids checked the valves and spring when I did the solenoids fluid filter the speed sensor and connector on the transfer case which I think is the output speed sensor also changed the tcm these are the current codes I would really appreciate any help that you would recommend if not I will be replacing the trans completely po562 system voltage low (had too jump off car) po711 trans fluid temp sensor performance po722 output speed sensor circuit low voltage po723 output speed sensor circuit intermittent po741 torque converter clutch system stuck off po742 torque converter clutch system stuck on po751 1-2 shift solenoid valve performance no first or fourth gear po752 1-2 shift solenoid valve performance no first or third gear po756 2-3 shift solenoid valve performance no first or second gear I have not had time nor a power probe to check grounds of shorts or continuity on the wiring I’m sorry for such a long comment just need help thanks so much
Thank you for the info 😍🙂
Thankyou for the info
Thanks for watching
No 2 and 4 gears got Po752. Replaced both solenoids. No change?
You have a broken band inside the trans. Computer doesn't know the band is broken so it blames the solenoid
Can you help i have a 2006 honda transmission with 57000 miles on it and doesn't past rpm 3 tp 4 and only goes 35mph and had flashing d but fixed it now still does the same i replaced transmission shift control solenoid
Do you know what code was present?
P0752
@@andresguerrero7828 This code is a mechanical code usually something inside the trans. What happens when the trans shifts to 3rd? do you feel a slip?
No just feels heavy like if im putting alot of pressure but im not. And car only goes 35mph
@@andresguerrero7828 almost sounds like failsafe, is it shifting
I have 2nd gear if I let off the gas and I have that code what could it be
It's actually probably going from 1st to 3rd. After it shifts put the shifter in manual 2nd and give some gas see what you have
I will see what happens in a few minutes and get back to you thanks gary
@@GaryFerraro shifts to 2nd once I let off gas
@@Pabloxpal Probably internal problem, I think it's still an issue with the band, band maybe cracked
Quite possible the problem with it... it was fine then one day I had this issue
thanks loads
Thanks for watching, please subscribe